EF Logo

backhoe loadermade by CatUAE, Global

Cat 444Specs, weight and dimensions

Weight
9.54 t
9,543 kg
Dig depth
4.331 m
14.2 ft
Est. new price
~AED 570k

Quick answer

The Cat 444 is a 9.54-tonne backhoe loader with a Cat 3054C engine rated at 70 kW (95 hp). It digs to 4.331 m with the backhoe, carries 1.3 m³ in the front shovel, dumps at 2.826 m and travels at up to 40 km/h between sites. It suits trenching for pipes and cables. Nearest in weight are the Case 590SN (9.67 t) and the JCB 4CX (8.6 t).

Cat 444 (illustration)

How much does a Cat 444 weigh?

The Cat 444 weighs 9.54 tonnes (9,543 kg, 21,039 lb) in working order, with fuel, operator and standard attachment. That is 1% lighter than the Case 590SN (9.67 t) and 11% heavier than the JCB 4CX (8.6 t). The figures are from Cat 444 Backhoe Loader spec sheet AEHQ8259-01, AME region. Options and attachments change the figure, so check the plate of the machine in front of you.

What engine is in the Cat 444?

The Cat 444 has a Cat 3054C engine rated at 70 kW (95 hp) net. It displaces 4.4 L and makes 397 Nm (293 lbf·ft) of torque. Emissions: Tier 2 equivalent (3054C); Tier 3 equivalent (optional C4.4). The fuel tank holds 160 L (42.3 US gal) and the engine takes 9 L (2.4 US gal) of oil.

Cat fault codes

How deep can a Cat 444 dig?

The Cat 444 digs to 4.331 m with the backhoe, carries 1.3 m³ in the front shovel, dumps at 2.826 m and travels at up to 40 km/h between sites. In imperial units the dig depth is 14.2 ft. The sheet notes: SAE maximum, standard stick. On the same row of their sheets, the Case 590SN shows 4.72 m and the JCB 4CX shows 4.32 m.

What are the Cat 444 dimensions?

The Cat 444 is 5.89 m (19 ft 4 in) long, 2.32 m (7 ft 7 in) wide and 3.83 m (12 ft 7 in) high. As it stands it is too big for the door of a standard shipping container. The Case 590SN is 7.25 m long, 2.36 m wide and 3.54 m high.

Cat 444 vs Case 590SN: what is the difference?

The Cat 444 is 1% lighter than the Case 590SN: 9.54 t against 9.67 t. The Cat 444 dumps higher (2.826 m against 2.72 m), lifts its hinge pin higher (3.615 m against 3.5 m) and takes a bigger shovel (1.3 m³ against 0.99 m³). Both sets of figures are the makers’ own, for the builds on our sheets.

Cat 444 dimensions

Cat 444, side view with dimensions (illustration)3.83 m2.24 m5.89 m
Side view
Cat 444, front view (illustration)2.32 m
Front view
Overall height
3.83 m
Wheelbase
2.24 m
Overall length
5.89 m
Overall width
2.32 m

Illustration; figures from the maker's sheet.

How big is the Cat 444?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 444 drawn to scale beside a person, a pickup truck and a 40 ft container. The Cat 444 is 5.89 m long - about 1.1 pickup trucks - and 3.83 m tall, 2.2 times a person's height.Cat 4445.89 × 3.83 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Cat 444 is 5.89 m long - about 1.1 pickup trucks - and 3.83 m tall, 2.2 times a person's height.

Cat 444 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 3 November 2026.

57 figures in 9 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length in roading position5.847 m[1] p.4
Total travel length5.889 m[1] p.4
Total travel height3.826 mOverall transport height, standard stick[1] p.4
Overall width2.322 m[1] p.4
Cab roof height2.897 mHeight to top of cab/canopy[1] p.4
Height to top of exhaust stack2.861 m[1] p.4
Dimensions, part 2 of 2
FigureValue (metric)Source
Rear axle centreline to front grille2.795 m[1] p.4
Wheelbase2.235 mAWD[1] p.4
Shovel width (GP shovel)2.434 mLoader bucket width, 1.3 m³ GP and MP[1] p.5
Turning circle, outside front wheels9.8 mAWD, 28 in tyres, inner wheel not braked[1] p.3
Turning circle, outside widest loader bucket12.59 mAWD, 28 in tyres, inner wheel not braked[1] p.3

Stabilisers

Stabilisers
FigureValue (metric)Source
Stabiliser spread, overall width2.352 m[1] p.5

Backhoe performance

Backhoe performance, part 1 of 2
FigureValue (metric)Source
Max dig depth4.331 mSAE maximum, standard stick[1] p.5
Max dig depth (manufacturer's maximum)4.826 m[1] p.5
Max dig depth (4.9 m E-stick extended)5.707 mSAE maximum[1] p.5
Digging depth, 2400 mm flat bottom3.956 m[1] p.5
Digging depth, 600 mm flat bottom4.288 m[1] p.5
Reach at ground level, from slew centre5.652 m[1] p.5
Reach at ground level, from slew centre (4.9 m E-stick extended)7.081 m[1] p.5
Reach from rear axle centreline at ground line6.742 m[1] p.5
Backhoe performance, part 2 of 2
FigureValue (metric)Source
Max load-over height3.927 mLoading height, standard stick[1] p.5
Loading reach1.808 m[1] p.5
Maximum operating height (backhoe)5.596 m[1] p.5
Bucket tearout force63 kN[1] p.5
Dipper tearout force43 kN[1] p.5
Swing arc180°[1] p.5
Bucket rotation205°[1] p.5

Loader performance

Loader performance, part 1 of 2
FigureValue (metric)Source
Shovel capacity1.3 m³MP bucket, SAE rated (GP bucket also 1.3 m³)[1] p.5
Lift capacity to full height4,310 kg[1] p.5
Shovel breakout force58 kN[1] p.5
Lift breakout force57 kN[1] p.5
Tipping load at breakout point7,109 kg[1] p.5
Dump height2.826 m[1] p.5
Maximum hinge pin height3.615 m[1] p.5
Loader performance, part 2 of 2
FigureValue (metric)Source
Dump angle at full height45°[1] p.5
Dump reach at maximum angle0.944 m[1] p.5
Maximum bucket rollback at ground level42°[1] p.5
Loader digging depth0.056 m[1] p.5
Grille to bucket cutting edge, carry position1.488 m[1] p.5
Maximum operating height (loader)4.621 m[1] p.5

Weight

Weight
FigureValue (metric)Source
Operating weight9,543 kg[1] p.3
Operating weight (maximum, ROPS capacity)11,500 kg[1] p.3

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat 3054C, mechanical turbo, 74.5 kW[1] p.2
EmissionsTier 2 equivalent (3054C); Tier 3 equivalent (optional C4.4)[1] p.2
Displacement4.4 L[1] p.2
Bore105 mm[1] p.2
Stroke127 mm[1] p.2
Engine, part 2 of 2
FigureValue (metric)Source
Gross power75 kW (102 hp)[1] p.2
Gross power (ISO 14396)74.5 kW (101 hp)At 2,200 rpm, both engines[1] p.2
Net power70 kW (95 hp)[1] p.2
Max torque397 Nm[1] p.2

Transmission

Transmission
FigureValue (metric)Source
TransmissionAuto-shift 6F/3R (standard); with lock-up torque converter optional[1] p.2
Top speed40 km/h[1] p.2

Hydraulics

Hydraulics
FigureValue (metric)Source
Hydraulic systemClosed center; variable-flow axial piston pump[1] p.3
Pump flow187 L/minAt 2,200 rpm[1] p.3
Max pressure250 barSystem pressure, backhoe and loader[1] p.3

Tyres

Tyres
FigureValue (metric)Source
Tyres440/80R28[1] p.4

Build: Cat 444 backhoe loader for Africa-Middle East (spec sheet AEHQ8259-01, linked by Al-Bahar UAE), standard Cat 3054C 74.5 kW engine (Tier 2 equivalent), AWD auto-shift, 4.3 m standard stick, 1.3 m³ MP parallel-lift loader bucket, 440/80R28 tyres.

  1. [1]Cat 444 Backhoe Loader spec sheet AEHQ8259-01, AME region
  2. [2]Al-Bahar (Cat dealer, UAE) 444 page - links the sheet above

Cat 444 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Loading the 3D machine...

Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is

  1. Engine oil, with filter
    9 L
    Engine oil and filter, change every
    500 hours

    Fluid: Cat DEO-ULS SAE 15W-40 (Cat's grade for -10 to 50 °C) (Cat fluid selector: 444 (S/N L7M00001-Up))

    The dipstick and filler sit under the top engine access door; check daily, because an engine working a loader in heat breaks its oil down fast.

Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.

Service capacities

Fuel tank
160 L42.3 US gal
Engine oil, with filter
9 L2.4 US gal
Cooling system
17.5 L4.6 US gal
Diesel exhaust fluid (DEF)
19 L5 US gal
Hydraulic system, with tank
95 L25.1 US gal
Hydraulic tank
42 L11.1 US gal
Transmission, power shift (AWD)
19 L5 US gal
Rear axle
16 L4.2 US gal
Front axle
14 L3.7 US gal
Final drive, front (each)
1.7 L0.4 US gal
Final drive, rear (each)
1.7 L0.4 US gal

Service intervals

Engine oil and filter
500 hours
Transmission oil
1,000 hours
Axle oil
1,000 hours
Hydraulic oil
3,000 hours
Coolant
12,000 hours

Cat 444 against its rivals

The backhoe loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 444, Case 590SN, JCB 4CX, Case 580SN: specifications side by side
FigureCat 444this pageCase 590SN specsJCB 4CX specsCase 580SN specs
Operating weight9,543 kg9,673 kg8,600 kg8,078 kg
Gross power75 kW (102 hp)82 kW (110 hp)74.2 kW (100hp)72 kW (97 hp)
Max torque397 Nm460 Nm440 Nm453 Nm
Max dig depth4.331 m4.72 m4.32 m4.41 m
Reach at ground level, from slew centre5.652 m5.98 m5.4 m5.55 m
Dump height with standard bucket2.826 m2.72 m2.69 m2.69 m
Maximum hinge pin height3.615 m3.5 m3.46 m3.42 m
Shovel capacity1.3 m³0.99 m³1.2 m³0.79 m³
Pump flow187 L/min163 L/min165 L/min156 L/min
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 444 if you need a higher dump (2.826 m), a higher hinge pin (3.615 m) and a bigger shovel (1.3 m³).
  • Pick the Case 590SN if you need more gross power (82 kW), more torque (460 Nm) and a deeper dig (4.72 m).
  • Pick the Case 580SN if the lightest machine matters: at 8.08 t it weighs the least of the 4, and it leads no other figure here.

Cat 444 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat 444 costs about AED 570,000, base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

No Cat 444 is listed in the UAE on EquipmentsFinder right now. The prices below are for all backhoe loaders, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 9

AED 750 /day

No priced Cat 444 for hire yet: this is all backhoe loaders

Low AED 650High AED 850

No Cat 444 for rent listed right now.

Request a Cat 444

Who is asking for backhoe loaders in the UAE

Contractors posted 18 requests for backhoe loaders on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (11), Abu Dhabi (6) and Sharjah (1). Requests name a kind of machine, not a model, so this counts every backhoe loader, the Cat 444 among them.

Requests, last 12 months
18
For Dubai
11
For Abu Dhabi
6
  • JCB Backhoe Loader Required For Rent 2020 or AboveAbu Dhabi / 18 November 2026
  • Backhoe loader 1CUBDubai / 12 November 2026
  • JCB Backhoe Loader Required For RentDubai / 11 November 2026

Open backhoe loader requests on the Inquiry BoardPost a request for a Cat 444

Does a Cat 444 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Cat 444 is 3.83 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
5.89 m
Width
2.32 m
Height
3.83 m
Weight
9.5 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 444

For the people who run one: codes, charts and calculators that fit a backhoe loader.

Ranked: Backhoe loaders by dig depth

By maximum dig depth, deepest-digging first. The Cat 444 is 7 of 16; every figure is the maker's.

  1. 3Case 590SN4.72 m
  2. 4Cat 4304.61 m
  3. 5Case 580SN4.41 m
  4. 6Cat 4344.35 m
  5. 7Cat 444This page4.33 m
  6. 8JCB 4CX4.32 m
  7. 9Cat 4324.3 m
  8. 10JCB 3CX4.29 m
  9. 11Cat 4204.28 m

Showing 3 to 11 of 16, the machines nearest the Cat 444 by maximum dig depth.

Popular Cat backhoe loader models

Cat 444 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 444 questions

What is the Cat 444 lift height?

3.615 m (11.9 ft) to the bucket hinge pin at full lift.

How much can a Cat 444 lift?

Its loader lifts 4,310 kg (9,502 lb) at full height.

How much horsepower does the Cat 444 have?

95 hp (70 kW) net.

What size is the front bucket on a Cat 444?

1.3 m³ (1.7 yd³).

How tall is a Cat 444?

3.83 m (12 ft 7 in) overall.

How wide is a Cat 444?

2.32 m (7 ft 7 in) overall.

How much torque does a Cat 444 have?

397 Nm (293 lbf·ft).

What is the hydraulic flow of a Cat 444?

187 L/min (49.4 US gpm), at 2,200 rpm.

What are the Cat 444's main competitors?

The machines nearest it in size are the Case 590SN, the Cat 434 and the JCB 4CX. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 444 sold in the UAE?

Yes. The Cat 444 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Cat 444 used for?

A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.

Embed this spec card

The Cat 444's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-444" title="Cat 444 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-444">Cat 444 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 444 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.