EF Logo

backhoe loadermade by CatUAE, Global

Cat 426Specs, weight and dimensions

Weight
8.43 t
8,425 kg
Dig depth
4.116 m
Front shovel
1.05 m³
1.37 yd³

Quick answer

The Cat 426 is an 8.43-tonne backhoe loader with a Cat 3054C engine rated at 66.4 kW (89 hp). It digs to 4.116 m with the backhoe, carries 1.05 m³ in the front shovel, dumps at 2.735 m and travels at up to 40 km/h between sites. It suits trenching for pipes and cables. Its rivals include the Cat 430 (8.19 t) and the JCB 4CX (8.6 t).

Cat 426 (illustration)

How much does a Cat 426 weigh?

The Cat 426 weighs 8.43 tonnes (8,425 kg, 18,574 lb) in working order, with fuel, operator and standard attachment. That is 3% heavier than the Cat 430 (8.19 t) and 2% lighter than the JCB 4CX (8.6 t). The figures are from Cat 426 Backhoe Loader spec sheet AEHQ8414-02 (11-2023), AME / Eurasia / APD / South America.

What engine is in the Cat 426?

The Cat 426 is offered with Cat 3054C, mechanical, turbocharged (standard); Cat C4.4 turbo aftercooled optional. The sheet's power figure is 66.4 kW (89 hp) net (SAE J1349:2011, peak at 2,000 rpm; C4.4: 67.2 kW). It displaces 4.4 L (269 in³) and makes 394 Nm (291 lb-ft) of torque. Emissions: U.S. EPA Tier 2 / EU Stage II equivalent (3054C); Tier 3 / Stage IIIA equivalent (C4.4).

Cat fault codes

How deep can a Cat 426 dig?

The Cat 426 digs to 4.116 m with the backhoe, carries 1.05 m³ in the front shovel, dumps at 2.735 m and travels at up to 40 km/h between sites. In imperial units the dig depth is 13'6". The sheet notes: SAE maximum, standard stick. On the same row of their sheets, the Cat 430 shows 4.612 m and the JCB 4CX shows 4.32 m.

What are the Cat 426 dimensions?

The Cat 426 is 5.68 m (18 ft 8 in) long, 2.35 m (7 ft 8 in) wide and 3.76 m (12 ft 4 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 430 is 7.30 m long, 2.25 m wide and 3.85 m high.

Cat 426 vs Cat 430: what is the difference?

The Cat 426 is 3% heavier than the Cat 430: 8.43 t against 8.19 t. The Cat 426 takes a bigger shovel (1.05 m³ against 0.96 m³), has more digging or pushing force (54 kN against 50 kN) and turns tighter (8.18 m against 8.205 m). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the current 426. The 426F2 is not covered here and has figures of its own, so check the serial plate before using these for one.

Cat 426 dimensions

Cat 426, side view with dimensions (illustration)3.76 m2.2 m5.68 m
Side view
Cat 426, front view (illustration)2.35 m
Front view
Overall height
3.76 m
Wheelbase
2.2 m
Overall length
5.68 m
Overall width
2.35 m

Illustration; figures from the maker's sheet.

How big is the Cat 426?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 426 drawn to scale beside a person and a pickup truck. The Cat 426 is 5.68 m long - about 1.1 pickup trucks - and 3.76 m tall, 2.1 times a person's height.Cat 4265.68 × 3.76 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Cat 426 is 5.68 m long - about 1.1 pickup trucks - and 3.76 m tall, 2.1 times a person's height.

Cat 426 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

78 figures in 9 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length in roading position5.725 mGP 1.05 m³ bucket; 5.674 m with MP bucket[1] p.16
Total travel length5.677 mOverall transportation length, GP bucket[1] p.16
Total travel height3.757 mOverall transportation height[1] p.16
Overall width2.346 m[1] p.16
Cab roof height2.895 mHeight to top of cab/canopy[1] p.16
Height to top of exhaust stack2.716 m[1] p.16
Rear axle centreline to front grille2.708 m[1] p.16
Dimensions, part 2 of 2
FigureValue (metric)Source
Wheelbase2.2 mAWD[1] p.16
Grille to bucket cutting edge, carry position1.48 mGP bucket; 1.449 m with MP bucket[1] p.17
Stabiliser overall width2.242 m[1] p.17
Shovel width (GP shovel)2.262 m[1] p.17
Turning circle, outside front wheels8.18 mAWD, inner wheel not braked[1] p.15
Turning circle, outside widest loader bucket10.97 mAWD, inner wheel not braked[1] p.15

Backhoe performance

Backhoe performance, part 1 of 2
FigureValue (metric)Source
Max dig depth4.116 mSAE maximum, standard stick[1] p.17
Max dig depth (E-stick retracted)4.191 mSAE maximum[1] p.17
Max dig depth (E-stick extended)5.208 mSAE maximum[1] p.17
Max dig depth (manufacturer's maximum)4.707 mStandard stick; 4.756 m E-stick retracted, 5.697 m extended[1] p.17
Digging depth, 2440 mm flat bottom3.74 mStandard stick; 3.806 m retracted, 4.887 m extended[1] p.17
Digging depth, 600 mm flat bottom4.092 mStandard stick; 4.158 m retracted, 5.168 m extended[1] p.17
Reach at ground level, from slew centre5.603 mReach from swing pivot at ground line, standard stick[1] p.17
Reach at ground level, from slew centre (E-stick extended)6.585 mE-stick retracted 5.657 m[1] p.17
Backhoe performance, part 2 of 2
FigureValue (metric)Source
Max load-over height3.934 mLoading height, standard stick; 3.947 m retracted, 4.491 m extended[1] p.17
Loading reach1.528 mStandard stick; 1.648 m retracted, 2.546 m extended[1] p.17
Maximum operating height (backhoe)5.721 mStandard stick; 6.338 m E-stick extended[1] p.17
Bucket tearout force57 kNStandard stick; 56.61 kN with E-stick[1] p.17
Dipper tearout force35 kNStandard stick; 33.66 kN E-stick retracted, 24.59 kN extended[1] p.17
Swing arc180°[1] p.17
Bucket rotation205°[1] p.17

Loader performance

Loader performance, part 1 of 2
FigureValue (metric)Source
Shovel capacity1.05 m³GP bucket, 2,262 mm wide; MP bucket 1.0 m³[1] p.17
Lift capacity to full height3,630 kgGP bucket; 3,496 kg MP, 3,172 kg MP with forks[1] p.17
Shovel breakout force54 kNTilt breakout force, GP bucket; 60.47 kN MP[1] p.17
Lift breakout force54 kNGP bucket; 53.95 kN MP[1] p.17
Tipping load at breakout point6,225 kgGP bucket; 6,301 kg MP[1] p.17
Dump height2.735 mAt maximum angle, GP bucket; 2.766 m MP[1] p.17
Maximum hinge pin height3.449 m[1] p.17
Loader performance, part 2 of 2
FigureValue (metric)Source
Dump angle at full height46°[1] p.17
Dump reach at maximum angle0.897 mGP bucket; 0.822 m MP[1] p.17
Maximum bucket rollback at ground level41°GP bucket; 42 deg MP[1] p.17
Loader digging depth0.112 mGP bucket; 0.145 m MP[1] p.17
Maximum grading angle113°GP bucket; 116 deg MP[1] p.17
Maximum operating height (loader)4.37 mGP bucket; 4.348 m MP[1] p.17

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight8,425 kgEstimated; standard engine, standard stick, standard cab with A/C, AWD standard-shift, 1 m³ MP bucket, 24 in hoe bucket, no counterweight, 80 kg operator, full fuel[1] p.15
Operating weight (maximum, ROPS capacity)11,000 kg[1] p.15
E-stick210 kg[1] p.15
Loader bucket, GP530 kg[1] p.15
Weight, part 2 of 2
FigureValue (metric)Source
Loader bucket, MP681 kg[1] p.15
Loader bucket, MP with fork brackets691 kg[1] p.15
Counterweight, base115 kgMedium 240 kg, high 460 kg[1] p.15
Minimum counterweight, GP loader bucket (standard stick)115 kg460 kg with E-stick; none needed with MP bucket[1] p.15

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat 3054C, mechanical, turbocharged (standard); Cat C4.4 turbo aftercooled optional[1] p.14
EmissionsU.S. EPA Tier 2 / EU Stage II equivalent (3054C); Tier 3 / Stage IIIA equivalent (C4.4)[1] p.14
Displacement4.4 L[1] p.14
Bore105 mm[1] p.14
Stroke127 mm[1] p.14
Gross power69.3 kW (93 hp)SAE J1995:2014 at 2,200 rpm; C4.4: 70.9 kW[1] p.14
Engine, part 2 of 2
FigureValue (metric)Source
Gross power (ISO 14396)68.5 kW (93 hp)At 2,200 rpm; C4.4: 70 kW[1] p.14
Net power66.4 kW (89 hp)SAE J1349:2011, peak at 2,000 rpm; C4.4: 67.2 kW[1] p.14
Net power (ISO 9249)65.3 kW (87 hp)Peak at 2,000 rpm; C4.4: 66 kW[1] p.14
Max torque394 NmAt 1,400 rpm; C4.4: 383 Nm[1] p.14
Torque rise (net)38% at 1,200 rpm (3054C); 37% at 1,400 rpm (C4.4)[1] p.14
Altitude deratingNone required up to 2,286 m; auto derate protects hydraulic and transmission systems[1] p.14

Transmission

Transmission, part 1 of 2
FigureValue (metric)Source
TransmissionPower shuttle, 4 forward / 4 reverse (standard); 4-speed manual optional[1] p.14
Gear 1, forward and reverse5.6 km/h[1] p.14
Gear 2, forward and reverse9.3 km/h[1] p.14
Gear 3, forward and reverse21.0 km/h[1] p.14
Top speed40 km/h4th gear, 4WD, 16.9-28 rear tyres[1] p.14
Transmission, part 2 of 2
FigureValue (metric)Source
Front axle rating, static22,964 kgAWD[1] p.15
Front axle rating, dynamic9,186 kgAWD[1] p.15
Rear axle rating, static22,964 kg[1] p.15
Rear axle rating, dynamic9,186 kg[1] p.15
Steering angle (AWD front axle)52°[1] p.15

Hydraulics

Hydraulics
FigureValue (metric)Source
Hydraulic systemClosed centre; variable-flow axial piston pump, load sensing[1] p.14
Pump flow132 L/minMaximum pump capacity[1] p.14
Max pressure250 barBackhoe and loader, both 250 bar[1] p.14

Tyres

Tyres
FigureValue (metric)Source
Front tyres12.5/80-18 (AWD); 12-16.5 (2WD)[1] p.18
Rear tyres16.9-28 (standard); 18.4-26 optional[1] p.18

Noise

Noise
FigureValue (metric)Source
Sound level, inside cab80 dB(A)[1] p.14
Sound level, outside cab104 dB(A)[1] p.14

Build: Cat 426 backhoe loader as Cat lists it for Africa/Middle East, Eurasia, APD and South America (spec sheet AEHQ8414-02, 11-2023, the sheet behind Al-Bahar UAE 426 page): standard Cat 3054C 68.5 kW engine, 4WD power shuttle, standard cab, 1.05 m³ GP loader bucket, 12.5/80-18 front and 16.9-28 rear tyres. The optional Cat C4.4 engine is noted in the engine rows; Al-Bahar also lists the earlier 426F2 separately, which is not used.

  1. [1]Cat 426 Backhoe Loader spec sheet AEHQ8414-02 (11-2023), AME / Eurasia / APD / South America
  2. [2]Al-Bahar (Cat dealer, UAE) 426 page: 89 hp net, 18,574 lb operating weight, 24,251 lb maximum

Cat 426 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
160 L42.3 gal
Engine oil, with filter
8.8 L2.3 gal
Cooling system
22 L5.8 gal
Hydraulic system, with tank
106 L28.0 gal
Hydraulic tank
40 L10.6 gal
Transmission, power shuttle (AWD)
15 L4.0 gal
Rear axle
16.5 L4.4 gal
Rear axle planetaries
1.7 L0.4 gal
Front axle (AWD)
6.5 L1.7 gal
Front axle planetaries
0.7 L0.2 gal

Cat 426 against its rivals

The backhoe loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 426, Cat 430, JCB 4CX, Case 580SN: specifications side by side
FigureCat 426this pageCat 430 specsJCB 4CX specsCase 580SN specs
Operating weight8,425 kg8,188 kg8,600 kg8,078 kg
Gross power69.3 kW (93 hp)88 kW (118 hp)74.2 kW (100hp)72 kW (97 hp)
Max torque394 Nm486 Nm440 Nm453 Nm
Max dig depth4.116 m4.612 m4.32 m4.41 m
Reach at ground level, from slew centre5.603 m6.032 m5.4 m5.55 m
Dump height with standard bucket2.735 m2.758 m2.69 m2.69 m
Maximum hinge pin height3.449 m3.488 m3.46 m3.42 m
Shovel capacity1.05 m³0.96 m³1.2 m³0.79 m³
Tipping load at breakout point6,225 kg7,081 kgnot on its sheetnot on its sheet
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The Cat 426 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Cat 430 if you need more gross power (88 kW), more torque (486 Nm) and a deeper dig (4.612 m).
  • Pick the JCB 4CX if you need a bigger shovel (1.2 m³).
  • Pick the Case 580SN if the lightest machine matters: at 8.08 t it weighs the least of the 4, and it leads no other figure here.

Cat 426 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Cat 426 on EquipmentsFinder in the UAE now: none for rent, 1 listed for sale. Too few carry a price to give a Cat 426 range, so the figure below is for all backhoe loaders.

See all 1

Typical asking price, usedmedian of 8

AED 135,000

No priced Cat 426 for sale yet: this is all backhoe loaders

Low AED 35,000High AED 185,000

Who is asking for backhoe loaders in the UAE

Contractors posted 18 requests for backhoe loaders on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (11), Abu Dhabi (6) and Sharjah (1). Requests name a kind of machine, not a model, so this counts every backhoe loader, the Cat 426 among them.

Requests, last 12 months
18
For Dubai
11
For Abu Dhabi
6
  • JCB Backhoe Loader Required For Rent 2020 or AboveAbu Dhabi / 18 November 2026
  • Backhoe loader 1CUBDubai / 12 November 2026
  • JCB Backhoe Loader Required For RentDubai / 11 November 2026

Open backhoe loader requests on the Inquiry BoardPost a request for a Cat 426

Does a Cat 426 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Cat 426 is 2.35 m wide against a 2.34 m door opening and 3.76 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
5.68 m
Width
2.35 m
Height
3.76 m
Weight
8.4 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 426

For the people who run one: codes, charts and calculators that fit a backhoe loader.

Ranked: Backhoe loaders by dig depth

By maximum dig depth, deepest-digging first. The Cat 426 is 14 of 16; every figure is the maker's.

  1. 8JCB 4CX4.32 m
  2. 9Cat 4324.3 m
  3. 10JCB 3CX4.29 m
  4. 11Cat 4204.28 m
  5. 12Cat 4164.28 m
  6. 13John Deere 310 P-Tier4.15 m
  7. 14Cat 426This page4.12 m
  8. 15JCB 2CX3.7 m
  9. 16JCB 1CX2.54 m

Showing 8 to 16 of 16, the machines nearest the Cat 426 by maximum dig depth.

Popular Cat backhoe loader models

Cat 426 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 426 questions

What is the Cat 426 lift height?

3.449 m (11'4") to the bucket hinge pin at full lift.

How much can a Cat 426 lift?

Its loader lifts 3,630 kg (8,003 lb) at full height.

What size is the front bucket on a Cat 426?

1.05 m³ (1.37 yd³).

How tall is a Cat 426?

3.76 m (12 ft 4 in) overall.

How wide is a Cat 426?

2.35 m (7 ft 8 in) overall.

How much torque does a Cat 426 have?

394 Nm (291 lb-ft).

What is the hydraulic flow of a Cat 426?

132 L/min (34.9 gal/min), maximum pump capacity.

What is the load-over height of a Cat 426?

3.934 m (12'11").

What are the Cat 426's main competitors?

The machines nearest it in size are the Cat 432, the JCB 4CX and the Cat 430. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 426 sold in the UAE?

Yes. The Cat 426 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Cat 426 used for?

A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.

Embed this spec card

The Cat 426's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-426" title="Cat 426 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-426">Cat 426 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 426 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.