Cat 416 specs
- dig depth
- 4.277 m
- net power
- 52 kW (70 hp)
- operating weight
- 7,499 kg
- shovel capacity
- 0.96 m³
Cat 416 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 1 | Overall length (loader on ground) | 7.131 m23'5" |
| 2 | Total travel height | 3.646 m12'0" |
| 3 | Cab roof height | 2.815 m9'3" |
| 4 | Height to top of exhaust stack | 2.72 m8'11" |
| 5 | Rear axle centreline to front grille | 2.706 m8'11" |
| 6 | Wheelbase | 2.2 m7'3" |
Cat 416 specifications
Current-generation Cat 416 backhoe loader (C3.6, Tier 4 Final / Stage V, North American spec sheet AEHQ8242-04), standard-stick, 4WD power-shuttle, 0.96 m³ GP pin-on loader bucket configuration; Al-Bahar (UAE) lists no 416, so the North American sheet is used.
63 figures in 9 groups
Dimensions
- Total travel length
- 7.162 m
- Overall width
- 2.248 m
- Shovel width (GP shovel)
- 2.262 m
- Height to loader hinge pin (transport)
- 0.378 m
- Ground clearance (LH step)
- 0.316 m
- Ground clearance (AWD guard)
- 0.312 m
- Ground clearance (485 kg counterweight)
- 0.289 m
- Front wheel tread gauge
- 1.895 m
- Rear wheel tread gauge
- 1.728 m
- Turning circle, outside front wheels
- 8.205 mInner wheel not braked
- Turning circle, outside widest loader bucket
- 10.745 mInner wheel not braked
Stabilisers
- Stabiliser spread, operating (centre)
- 3.31 m
- Stabiliser spread, operating (outside)
- 3.77 m
- Rear frame width
- 2.322 m
Backhoe performance
- Max dig depth
- 4.277 mSAE maximum, standard stick
- Max dig depth (E-stick extended)
- 5.371 mSAE maximum, extendible stick extended
- Digging depth, 2438 mm flat bottom
- 3.899 m
- Digging depth, 610 mm flat bottom
- 4.239 m
- Reach at ground level, from slew centre
- 5.6 m
- Reach at ground level, from slew centre (E-stick extended)
- 6.641 m
- Reach from rear axle centreline at ground line
- 6.69 m
- Max load-over height
- 3.71 mLoading height, standard stick
- Loading reach
- 1.841 m
- Maximum operating height (backhoe)
- 5.601 m
- Bucket tearout force
- 59 kN
- Dipper tearout force
- 32 kN
- Swing arc
- 180°
- Bucket rotation
- 205°
Loader performance
- Shovel capacity
- 0.96 m³GP bucket, SAE rated, pin-on
- Lift capacity to full height
- 2,962 kg
- Shovel breakout force
- 46 kN
- Lift breakout force
- 46 kN
- Tipping load at breakout point
- 6,486 kg
- Dump height
- 2.758 m
- Maximum hinge pin height
- 3.488 m
- Dump angle at full height
- 44°
- Dump reach at maximum angle
- 0.807 m
- Maximum bucket rollback at ground level
- 36°
- Loader digging depth
- 0.07 m
- Grille to bucket cutting edge, carry position
- 1.48 m
- Maximum operating height (loader)
- 4.356 m
Weight
- Operating weight
- 7,499 kg
- Operating weight (maximum, ROPS capacity)
- 11,000 kg
- Operating weight (minimum)
- 7,072 kg
Engine
- Engine model
- Cat C3.6, electronic turbo, intercooled55 kW (74 hp) and 70 kW (96 hp) ratings
- Emissions
- U.S. EPA Tier 4 Final / EU Stage V
- Displacement
- 3.6 L
- Bore
- 98 mm
- Stroke
- 120 mm
- Gross power
- 56 kW (75 hp)SAE J1995 at 2,200 rpm; 55 kW (74 hp) rating
- Gross power (ISO 14396)
- 55 kW (74 hp)At 2,200 rpm; 55 kW (74 hp) rating
- Net power
- 52 kW (70 hp)SAE J1349 at 2,200 rpm; 55 kW (74 hp) rating
- Max torque
- 418 Nm
- Gross power, 96 hp rating
- 71 kW (96 hp)SAE J1995 at 2,200 rpm; 70 kW (96 hp) rating
- Net power, 96 hp rating
- 64 kW (85 hp)SAE J1349 at 2,200 rpm; 70 kW (96 hp) rating
- Max torque, 96 hp rating
- 396 Nm
Transmission
- Transmission
- Power shuttle 4F/4R (standard); 4F/3R power shift optional
- Top speed
- 38 km/h
Hydraulics
- Hydraulic system
- Closed center; variable-flow axial piston pump
- Pump flow
- 132 L/minAt 2,200 rpm
- Max pressure
- 230 bar
Tyres
- Front tyres
- 340/80-18
- Rear tyres
- 500/70-24
Source: Cat 416 Backhoe Loader spec sheet AEHQ8242-04 (North America)
Cat 416 service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 9 L
- Engine oil and filter, change every
- 500 hours
Fluid: Cat DEO-ULS SAE 15W-40 (Cat's grade for -10 to 50 °C) (Cat fluid selector: 416 (S/N H8P00001-Up))
The C3.6 holds only about 9 L, so a missed check or a late change on a hot day costs it quickly; the dipstick and filler are under the top engine door.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 160 L42.3 gal
- Engine oil, with filter
- 9 L2.4 gal
- Cooling system
- 18 L4.8 gal
- Diesel exhaust fluid (DEF)
- 19 L5.0 gal
- Hydraulic system, with tank
- 95 L25.1 gal
- Hydraulic tank
- 42 L11.1 gal
- Transmission, power shuttle (AWD)
- 18 L4.8 gal
- Transmission, power shift (AWD)
- 19 L5.0 gal
- Rear axle
- 16 L4.2 gal
- Front axle (AWD)
- 11 L2.9 gal
- Final drive, front (each)
- 0.7 L0.2 US gal
- Final drive, rear (each)
- 1.7 L0.4 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Transmission oil
- 1,000 hours
- Axle oil
- 1,000 hours
- Hydraulic oil
- 3,000 hours
- Coolant
- 12,000 hours
Compare the Cat 416
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 416
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.16m
- Width
- 2.25m
- Height
- 3.65m
- Weight
- 7.5t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-height): expect a surcharge
Cat 416 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 9
AED 750 /day
No priced Cat 416 for hire yet: this is all backhoe loaders
About the Cat 416
The Cat 416 is a 7.5-tonne backhoe loader with a Cat C3.6 engine rated at 52 kW (70 hp).
It digs to 4.277 m with the backhoe, carries 0.96 m³ in the front shovel, dumps at 2.758 m and travels at up to 38 km/h between sites.
For transport it measures 7.162 m long and 2.248 m wide, and its tank holds 160 L of fuel.
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites.
Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Cat 416 questions
How much does a Cat 416 weigh?
7,499 kg (16,532 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Cat 416 have?
A Cat C3.6 engine rated at 52 kW (70 hp) net.
How deep can a Cat 416 dig?
Up to 4.277 m (14'0") with the backhoe.
How much does the Cat 416's front shovel hold?
0.96 m³ (1.26 yd³).
What are the Cat 416's dimensions?
7.16 m long, 2.25 m wide and 3.65 m high, from Cat's dimension drawing.
How do you transport a Cat 416?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the Cat 416's fuel tank capacity?
160 L (42.3 gal).
How much oil does a Cat 416 take?
Engine oil: 9 L (2.4 gal). Hydraulic oil: Closed center; variable-flow axial piston pump.
How often does a Cat 416 need an oil change?
Cat sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Cat 416's main competitors?
The machines nearest it in size are the JCB 3DX, the John Deere 310 P-Tier, the JCB 3CX. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 416 sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a Cat 416 used for?
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Need a Cat 416 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
