Cat 416

Current-generation Cat 416 backhoe loader (C3.6, Tier 4 Final / Stage V, North American spec sheet AEHQ8242-04), standard-stick, 4WD power-shuttle, 0.96 m³ GP pin-on loader bucket configuration; Al-Bahar (UAE) lists no 416, so the North American sheet is used.

USAGlobal

dig depth: 4.277 m
power: 52 kW (70 hp)
Operating weight: 7,499 kg
Shovel capacity: 0.96 m³

Side

Front

Overall length (loader on ground): 7.131 m
Total travel height: 3.646 m
Cab roof height: 2.815 m
Height to top of exhaust stack: 2.72 m
Rear axle centreline to front grille: 2.706 m
Wheelbase: 2.2 m

Dimensions

Total travel length: 7.162 m
Overall width: 2.248 m
Shovel width (GP shovel): 2.262 m
Height to loader hinge pin (transport): 0.378 m
Ground clearance (LH step): 0.316 m
Ground clearance (AWD guard): 0.312 m
Ground clearance (485 kg counterweight): 0.289 m
Front wheel tread gauge: 1.895 m
Rear wheel tread gauge: 1.728 m
Turning circle, outside front wheels (Inner wheel not braked): 8.205 m
Turning circle, outside widest loader bucket (Inner wheel not braked): 10.745 m

Stabilisers

18Stabiliser spread, operating (centre): 3.31 m
19Stabiliser spread, operating (outside): 3.77 m
Rear frame width: 2.322 m

Backhoe performance

14Max dig depth (SAE maximum, standard stick): 4.277 m
Max dig depth (E-stick extended) (SAE maximum, extendible stick extended): 5.371 m
15Digging depth, 2438 mm flat bottom: 3.899 m
Digging depth, 610 mm flat bottom: 4.239 m
16Reach at ground level, from slew centre: 5.6 m
Reach at ground level, from slew centre (E-stick extended): 6.641 m
Reach from rear axle centreline at ground line: 6.69 m
Max load-over height (Loading height, standard stick): 3.71 m
17Loading reach: 1.841 m
Maximum operating height (backhoe): 5.601 m
Bucket tearout force: 59 kN
Dipper tearout force: 32 kN
Swing arc: 180°
Bucket rotation: 205°

Loader performance

Shovel capacity (GP bucket, SAE rated, pin-on): 0.96 m³
Lift capacity to full height: 2,962 kg
Shovel breakout force: 46 kN
Lift breakout force: 46 kN
Tipping load at breakout point: 6,486 kg
Dump height: 2.758 m
7Maximum hinge pin height: 3.488 m
8Dump angle at full height: 44°
9Dump reach at maximum angle: 0.807 m
10Maximum bucket rollback at ground level: 36°
11Loader digging depth: 0.07 m
12Grille to bucket cutting edge, carry position: 1.48 m
13Maximum operating height (loader): 4.356 m

Weight

Operating weight: 7,499 kg
Operating weight (maximum, ROPS capacity): 11,000 kg
Operating weight (minimum): 7,072 kg

Engine

Engine model (55 kW (74 hp) and 70 kW (96 hp) ratings): Cat C3.6, electronic turbo, intercooled
Emissions: U.S. EPA Tier 4 Final / EU Stage V
Displacement: 3.6 L
Bore: 98 mm
Stroke: 120 mm
Gross power (SAE J1995 at 2,200 rpm; 55 kW (74 hp) rating): 56 kW (75 hp)
Gross power (ISO 14396) (At 2,200 rpm; 55 kW (74 hp) rating): 55 kW (74 hp)
Net power (SAE J1349 at 2,200 rpm; 55 kW (74 hp) rating): 52 kW (70 hp)
Max torque: 418 Nm
Gross power, 96 hp rating (SAE J1995 at 2,200 rpm; 70 kW (96 hp) rating): 71 kW (96 hp)
Net power, 96 hp rating (SAE J1349 at 2,200 rpm; 70 kW (96 hp) rating): 64 kW (85 hp)
Max torque, 96 hp rating: 396 Nm

Transmission

Transmission: Power shuttle 4F/4R (standard); 4F/3R power shift optional
Top speed: 38 km/h

Hydraulics

Hydraulic system: Closed center; variable-flow axial piston pump
Pump flow (At 2,200 rpm): 132 L/min
Max pressure: 230 bar

Tyres

Front tyres: 340/80-18
Rear tyres: 500/70-24

Service capacities

Fuel tank: 160 L
Engine oil, with filter: 9 L
Cooling system (With air conditioning): 18 L
Diesel exhaust fluid (DEF): 19 L
Hydraulic system, with tank: 95 L
Hydraulic tank: 42 L
Transmission, power shuttle (AWD): 18 L
Transmission, power shift (AWD): 19 L
Rear axle: 16 L
Front axle (AWD): 11 L
Final drive, front (each): 0.7 L
Final drive, rear (each): 1.7 L

Service intervals

Engine oil and filter (or 12 months): 500 hours
Transmission oil: 1,000 hours
Axle oil: 1,000 hours
Hydraulic oil (With Cat HYDO Advanced 10): 3,000 hours
Coolant (Cat ELC, or 72 months): 12,000 hours