Cat 432 specs
- dig depth
- 4.298 m
- net power
- 70 kW (95 hp)
- operating weight
- 8,444 kg
- shovel capacity
- 1.03 m³
Cat 432 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 1 | Overall length in roading position | 5.744 m18.8 ft |
| 2 | Total travel height | 3.806 m12.5 ft |
| 3 | Cab roof height | 2.822 m9.3 ft |
| 4 | Height to top of exhaust stack | 2.715 m8.9 ft |
| 5 | Rear axle centreline to front grille | 2.705 m8.9 ft |
| 6 | Wheelbase | 2.2 m7.2 ft |
Cat 432 specifications
Cat 432 backhoe loader for Africa-Middle East, CIS, ANZP and SEA (spec sheet AEHQ8258-01, 05-2020, linked by Al-Bahar UAE), standard Cat 3054C 74.5 kW engine (Tier 2 equivalent), AWD powershift, 4.3 m standard stick, 1.03 m³ MP parallel-lift loader bucket.
52 figures in 9 groups
Dimensions
- Total travel length
- 5.731 m
- Overall width
- 2.352 m
- Shovel width (GP shovel)
- 2.406 m
- Turning circle, outside front wheels
- 8.205 mAWD, inner wheel not braked
- Turning circle, outside widest loader bucket
- 10.745 mAWD, inner wheel not braked
Stabilisers
- Stabiliser overall width
- 2.352 m
Backhoe performance
- Max dig depth
- 4.298 mSAE maximum, 4.3 m standard stick
- Max dig depth (manufacturer's maximum)
- 4.778 m4.3 m standard stick
- Max dig depth (4.9 m E-stick extended)
- 5.665 mSAE maximum
- Digging depth, 2400 mm flat bottom
- 3.915 m
- Digging depth, 600 mm flat bottom
- 4.255 m
- Reach at ground level, from slew centre
- 5.651 m
- Reach at ground level, from slew centre (4.9 m E-stick extended)
- 7.079 m
- Reach from rear axle centreline at ground line
- 6.741 m
- Max load-over height
- 3.991 mLoading height, standard stick
- Loading reach
- 1.69 m
- Maximum operating height (backhoe)
- 5.665 m
- Bucket tearout force
- 63 kN
- Dipper tearout force
- 43 kN
- Swing arc
- 180°
- Bucket rotation
- 205°
Loader performance
- Shovel capacity
- 1.03 m³MP bucket, SAE rated (GP bucket 1.0 m³)
- Lift capacity to full height
- 3,488 kg
- Shovel breakout force
- 60 kN
- Lift breakout force
- 53 kN
- Tipping load at breakout point
- 6,674 kg
- Dump height
- 2.78 m
- Maximum hinge pin height
- 3.462 m
- Dump angle at full height
- 45°
- Dump reach at maximum angle
- 0.732 m
- Maximum bucket rollback at ground level
- 39°
- Loader digging depth
- 0.132 m
- Grille to bucket cutting edge, carry position
- 1.471 m
- Maximum operating height (loader)
- 4.365 m
Weight
- Operating weight
- 8,444 kg
- Operating weight (maximum, ROPS capacity)
- 11,000 kg
Engine
- Engine model
- Cat 3054C, mechanical turbo, 74.5 kW
- Emissions
- Tier 2 equivalent (3054C); Tier 3 equivalent (optional C4.4)
- Displacement
- 4.4 L
- Bore
- 105 mm
- Stroke
- 127 mm
- Gross power
- 75 kW (102 hp)
- Gross power (ISO 14396)
- 74.5 kW (101 hp)At 2,200 rpm, both engines
- Net power
- 70 kW (95 hp)
- Max torque
- 397 Nm
Transmission
- Transmission
- Powershift 4F/3R (standard); 6F/3R auto-shift optional, with or without lock-up torque converter
- Top speed
- 40 km/h
Hydraulics
- Hydraulic system
- Closed center; variable-flow axial piston pump
- Pump flow
- 187 L/minAt 2,200 rpm
- Max pressure
- 250 barSystem pressure, backhoe and loader
Tyres
- Front tyres
- 12.5/80-18 SGL
- Rear tyres
- 16.9-28
Source: Cat 432 Backhoe Loader spec sheet AEHQ8258-01 (05-2020), AME / CIS / ANZP / SEA
Cat 432 service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 9 L
- Engine oil and filter, change every
- 500 hours
Fluid: Cat DEO-ULS SAE 15W-40 (Cat's grade for -10 to 50 °C) (Cat fluid selector: 432 (S/N L7E00001-Up))
The dipstick and filler sit under the top engine access door; check daily, because an engine working a loader in heat breaks its oil down fast.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 160 L42.3 US gal
- Engine oil, with filter
- 9 L2.4 US gal
- Cooling system
- 18 L4.8 US gal
- Diesel exhaust fluid (DEF)
- 19 L5 US gal
- Hydraulic system, with tank
- 95 L25.1 US gal
- Hydraulic tank
- 42 L11.1 US gal
- Transmission, powershift (AWD)
- 19 L5 US gal
- Rear axle
- 16 L4.2 US gal
- Front axle (AWD)
- 11 L2.9 US gal
- Final drive, front (each)
- 0.7 L0.2 US gal
- Final drive, rear (each)
- 1.7 L0.4 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Transmission oil
- 1,000 hours
- Axle oil
- 1,000 hours
- Hydraulic oil
- 3,000 hours
- Coolant
- 12,000 hours
Compare the Cat 432
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 432
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 5.73m
- Width
- 2.35m
- Height
- 3.81m
- Weight
- 8.4t
- RoadA beavertail or flatbed truck
- SeaA 20 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
Cat 432 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 9
AED 750 /day
No priced Cat 432 for hire yet: this is all backhoe loaders
About the Cat 432
The Cat 432 is a 8.44-tonne backhoe loader with a Cat 3054C engine rated at 70 kW (95 hp).
It digs to 4.298 m with the backhoe, carries 1.03 m³ in the front shovel, dumps at 2.78 m and travels at up to 40 km/h between sites.
For transport it measures 5.731 m long and 2.352 m wide, and its tank holds 160 L of fuel.
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites.
Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Cat 432 questions
How much does a Cat 432 weigh?
8,444 kg (18,616 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Cat 432 have?
A Cat 3054C engine rated at 70 kW (95 hp) net.
How deep can a Cat 432 dig?
Up to 4.298 m (14.1 ft) with the backhoe.
How much does the Cat 432's front shovel hold?
1.03 m³ (1.35 yd³).
What are the Cat 432's dimensions?
5.73 m long, 2.35 m wide and 3.81 m high, from Cat's dimension drawing.
How do you transport a Cat 432?
Road: a beavertail or flatbed truck. Sea: a 20 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the Cat 432's fuel tank capacity?
160 L (42.3 US gal).
How much oil does a Cat 432 take?
Engine oil: 9 L (2.4 US gal). Hydraulic oil: Closed center; variable-flow axial piston pump.
How often does a Cat 432 need an oil change?
Cat sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Cat 432's main competitors?
The machines nearest it in size are the JCB 4CX, the Cat 430, the Case 580SN. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 432 sold in the UAE?
Yes. The Cat 432 is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Cat 432 used for?
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Need a Cat 432 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
