John Deere 310 P-Tier specs
- dig depth
- 4.15 m
- net power
- 75 kW (100 hp)
- operating weight
- 7,750 kg
- shovel capacity
- 0.86 m³
John Deere 310 P-Tier dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| B | Total travel length | 7.47 m24 ft. 6 in. |
| O | Total travel height | 3.48 m11 ft. 5 in. |
| D | Cab roof height | 2.86 m9 ft. 4 in. |
| E | Wheelbase | 2.18 m7 ft. 2 in. |
| C | Width over tyres | 2.2 m7 ft. 3 in. |
| A | Ground clearance, minimum | 0.247 m10 in. |
| K | Rear frame width | 2.19 m7 ft. 2 in. |
| L | Stabiliser spread, operating | 3.1 m10 ft. 2 in. |
| M | Stabiliser overall width, operating | 3.53 m11 ft. 7 in. |
John Deere 310 P-Tier specifications
John Deere 310 P-Tier (Generation B) backhoe loader, EPA Final Tier 4 / EU Stage IV, North American brochure MB310PBU (25-06); figures are for 19.5L-24 rear tyres, 12-16.5 NHS front tyres and a 0.86 m³ loader bucket. No UAE/GCC 310 sheet was found.
45 figures in 8 groups
Dimensions
- Shovel width (GP shovel)
- 2.184 m
- Curb turning radius, with brakes
- 3.46 m
- Curb turning radius, without brakes
- 3.95 m
- Bucket clearance circle, with brakes
- 10.08 m
- Bucket clearance circle, without brakes
- 10.8 m
Backhoe performance
- Max dig depth
- 4.15 mSAE maximum, standard backhoe
- Max dig depth (extendable dipperstick extended)
- 5.29 m
- Digging depth (SAE), 610 mm flat bottom
- 4.12 m
- Digging depth (SAE), 2440 mm flat bottom
- 3.78 m
- Reach at ground level, from slew centre
- 5.42 m
- Reach at ground level, from slew centre (extendable dipperstick extended)
- 6.5 m
- Reach from centre of rear axle
- 6.48 m
- Max load-over height
- 3.48 m
- Max load-over height (extendable dipperstick extended)
- 4.22 m
- Bucket tearout force
- 49 kN
- Dipper tearout force
- 31 kN
- Bucket rotation
- 190°
- Swing arc
- 180°
Loader performance
- Shovel capacity
- 0.86 m³
- Lift capacity to full height
- 2,926 kg
- Shovel breakout force
- 42 kN
- Dump height
- 2.61 m
- Height to bucket hinge pin, maximum
- 3.35 m
- Reach at full height, bucket at 45 deg.
- 0.87 m
- Digging depth below ground, bucket level
- 0.212 m
- Length from front axle centreline to bucket cutting edge
- 2.09 m
- Bucket dump angle, maximum
- 45°
- Rollback angle at ground level
- 40°
Weight
- Operating weight
- 7,750 kgISO 6016 operating mass
- Gross machine mass (ISO 6016)
- 9,225 kg
- Operating weight (canopy, full fuel, 75 kg operator, 204 kg counterweight)
- 7,356 kgStandard equipment
- Operating weight (typical with cab, extendable dipperstick, 454 kg counterweight)
- 8,145 kg
Engine
- Engine model
- John Deere PowerTech EWL 4.5L 4045HL051 (Synchro-Shuttle) / 4045HL052 (PowerShift), turbocharged
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Displacement
- 4.5 L
- Gross power
- 76 kW (102 hp)Gross peak power at 1,600 rpm
- Net power
- 75 kW (100 hp)Net peak power, ISO 9249, at 1,600 rpm
- Max torque
- 458 NmNet peak torque, ISO 9249, at 1,500 rpm
Transmission
- Transmission
- 4-speed Synchro-Shuttle with hydraulic reverser (standard); 4-speed PowerShift (optional)
- Top speed
- 38 km/h
Hydraulics
- Hydraulic system
- Open-center system; single gear pump
- Pump flow
- 110 L/minAt 2,200 rpm, backhoe and loader
- Max pressure
- 250 bar
Tyres
- Front tyres
- 12-16.5 NHS (12) standard basis; options 12.5/80-18 R4 (10), 340/80R18
- Rear tyres
- 19.5L-24 R4 (12) standard basis; options 21L-24 R4 (12), 500/70R24
Source: John Deere 310 P-Tier Backhoe Loader brochure MB310PBU (25-06)
John Deere 310 P-Tier service
What each system holds and when John Deere says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 13 L
- Engine oil and filter, change every
- 500 hours
Fluid: John Deere Plus-50 II engine oil (John Deere 310 P Backhoe Loader replacement parts guide (oil and capacities, service intervals))
Deere gives the viscosity by temperature in the operator's manual.
The 500-hour change assumes clean work; Deere halves it to 250 hours in difficult conditions, which dusty, hot sites usually are.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 128.7 L34.0 gal.
- Diesel exhaust fluid (DEF) tank
- 13.7 L3.6 gal.
- Engine oil, with filter
- 13 L13.7 qt.
- Cooling system
- 27.5 L29.1 qt.
- Hydraulic system, with tank
- 109.8 L29.0 gal.
- Hydraulic tank
- 42.7 L11.3 gal.
- Torque converter and transmission (Synchro-Shuttle)
- 18 L19.0 qt.
- Rear axle
- 18 L19.0 qt.
- MFWD front axle housing
- 6.5 L1.7 US gal
- MFWD planetary housing (each)
- 0.9 L0.2 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Fuel filters
- 500 hours
- Transmission oil
- 1,000 hours
- Transmission filter
- 1,000 hours
- Hydraulic filter
- 1,000 hours
- Hydraulic oil
- 2,000 hours
- Axle oil
- 2,000 hours
- Coolant
- 6,000 hours
Compare the John Deere 310 P-Tier
The machines nearest in size, each drawn beside this one at the same scale.
Moving a John Deere 310 P-Tier
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.47m
- Width
- 2.2m
- Height
- 3.48m
- Weight
- 7.8t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-height): expect a surcharge
John Deere 310 P-Tier prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 9
AED 750 /day
No priced John Deere 310 P-Tier for hire yet: this is all backhoe loaders
No John Deere 310 P-Tier for rent listed right now.
Request a John Deere 310 P-TierAbout the John Deere 310 P-Tier
The John Deere 310 P-Tier is a 7.75-tonne backhoe loader with a John Deere PowerTech EWL 4.5L 4045HL051 (Synchro-Shuttle) / 4045HL052 (PowerShift) engine rated at 75 kW (100 hp).
It digs to 4.15 m with the backhoe, carries 0.86 m³ in the front shovel, dumps at 2.61 m and travels at up to 38 km/h between sites.
For transport it measures 7.47 m long and 2.2 m wide, and its tank holds 128.7 L of fuel.
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites.
Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
John Deere 310 P-Tier questions
How much does a John Deere 310 P-Tier weigh?
7,750 kg (17,086 lb.) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the John Deere 310 P-Tier have?
A John Deere PowerTech EWL 4.5L 4045HL051 (Synchro-Shuttle) / 4045HL052 (PowerShift) engine rated at 75 kW (100 hp) net.
How deep can a John Deere 310 P-Tier dig?
Up to 4.15 m (13 ft. 8 in.) with the backhoe.
How much does the John Deere 310 P-Tier's front shovel hold?
0.86 m³ (1.13 cu. yd.).
What are the John Deere 310 P-Tier's dimensions?
7.47 m long, 2.20 m wide and 3.48 m high, from John Deere's dimension drawing.
How do you transport a John Deere 310 P-Tier?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the John Deere 310 P-Tier's fuel tank capacity?
128.7 L (34.0 gal.).
How much oil does a John Deere 310 P-Tier take?
Engine oil: 13 L (13.7 qt.). Hydraulic oil: Open-center system; single gear pump.
How often does a John Deere 310 P-Tier need an oil change?
John Deere sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the John Deere 310 P-Tier's main competitors?
The machines nearest it in size are the JCB 3CX, the Cat 420, the John Deere 410 P-Tier. Each has a side-by-side comparison on EquipmentsFinder.
Is the John Deere 310 P-Tier sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a John Deere 310 P-Tier used for?
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Need a John Deere 310 P-Tier on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
