John Deere 310 P-Tier

John Deere 310 P-Tier (Generation B) backhoe loader, EPA Final Tier 4 / EU Stage IV, North American brochure MB310PBU (25-06); figures are for 19.5L-24 rear tyres, 12-16.5 NHS front tyres and a 0.86 m³ loader bucket. No UAE/GCC 310 sheet was found.

USAGlobal

dig depth: 4.15 m
power: 75 kW (100 hp)
Operating weight: 7,750 kg
Shovel capacity: 0.86 m³

Side

Front

Total travel length: 7.47 m
Total travel height: 3.48 m
Cab roof height: 2.86 m
Wheelbase: 2.18 m
Width over tyres: 2.2 m
Ground clearance, minimum: 0.247 m
Rear frame width: 2.19 m
Stabiliser spread, operating: 3.1 m
Stabiliser overall width, operating: 3.53 m

Dimensions

Shovel width (GP shovel): 2.184 m
Curb turning radius, with brakes: 3.46 m
Curb turning radius, without brakes: 3.95 m
Bucket clearance circle, with brakes: 10.08 m
Bucket clearance circle, without brakes: 10.8 m

Backhoe performance

IMax dig depth (SAE maximum, standard backhoe): 4.15 m
Max dig depth (extendable dipperstick extended): 5.29 m
JDigging depth (SAE), 610 mm flat bottom: 4.12 m
Digging depth (SAE), 2440 mm flat bottom: 3.78 m
GReach at ground level, from slew centre: 5.42 m
Reach at ground level, from slew centre (extendable dipperstick extended): 6.5 m
HReach from centre of rear axle: 6.48 m
FMax load-over height: 3.48 m
Max load-over height (extendable dipperstick extended): 4.22 m
Bucket tearout force: 49 kN
Dipper tearout force: 31 kN
NBucket rotation: 190°
Swing arc: 180°

Loader performance

Shovel capacity: 0.86 m³
Lift capacity to full height: 2,926 kg
Shovel breakout force: 42 kN
SDump height: 2.61 m
RHeight to bucket hinge pin, maximum: 3.35 m
TReach at full height, bucket at 45 deg.: 0.87 m
UDigging depth below ground, bucket level: 0.212 m
VLength from front axle centreline to bucket cutting edge: 2.09 m
PBucket dump angle, maximum: 45°
QRollback angle at ground level: 40°

Weight

Operating weight (ISO 6016 operating mass): 7,750 kg
Gross machine mass (ISO 6016): 9,225 kg
Operating weight (canopy, full fuel, 75 kg operator, 204 kg counterweight) (Standard equipment): 7,356 kg
Operating weight (typical with cab, extendable dipperstick, 454 kg counterweight): 8,145 kg

Engine

Engine model: John Deere PowerTech EWL 4.5L 4045HL051 (Synchro-Shuttle) / 4045HL052 (PowerShift), turbocharged
Emissions: EPA Final Tier 4 / EU Stage IV
Displacement: 4.5 L
Gross power (Gross peak power at 1,600 rpm): 76 kW (102 hp)
Net power (Net peak power, ISO 9249, at 1,600 rpm): 75 kW (100 hp)
Max torque (Net peak torque, ISO 9249, at 1,500 rpm): 458 Nm

Transmission

Transmission: 4-speed Synchro-Shuttle with hydraulic reverser (standard); 4-speed PowerShift (optional)
Top speed: 38 km/h

Hydraulics

Hydraulic system: Open-center system; single gear pump
Pump flow (At 2,200 rpm, backhoe and loader): 110 L/min
Max pressure: 250 bar

Tyres

Front tyres: 12-16.5 NHS (12) standard basis; options 12.5/80-18 R4 (10), 340/80R18
Rear tyres: 19.5L-24 R4 (12) standard basis; options 21L-24 R4 (12), 500/70R24

Service capacities

Fuel tank: 128.7 L
Diesel exhaust fluid (DEF) tank: 13.7 L
Engine oil, with filter: 13 L
Cooling system (Cab; 25.7 L with canopy): 27.5 L
Hydraulic system, with tank: 109.8 L
Hydraulic tank (Hydraulic reservoir): 42.7 L
Torque converter and transmission (Synchro-Shuttle): 18 L
Rear axle: 18 L
MFWD front axle housing: 6.5 L
MFWD planetary housing (each): 0.9 L

Service intervals

Engine oil and filter: 500 hours
Fuel filters (Primary and final): 500 hours
Transmission oil: 1,000 hours
Transmission filter: 1,000 hours
Hydraulic filter: 1,000 hours
Hydraulic oil: 2,000 hours
Axle oil: 2,000 hours
Coolant: 6,000 hours