John Deere 310 P-Tier

John Deere 310 P-Tier (Generation B) backhoe loader, EPA Final Tier 4 / EU Stage IV, North American brochure MB310PBU (25-06); figures are for 19.5L-24 rear tyres, 12-16.5 NHS front tyres and a 0.86 m³ loader bucket. No UAE/GCC 310 sheet was found.

USAGlobal

dig depth: 13 ft. 8 in.
power: 100 hp
Operating weight: 17,086 lb.
Shovel capacity: 1.13 cu. yd.

Side

Front

Total travel length: 24 ft. 6 in.
Total travel height: 11 ft. 5 in.
Cab roof height: 9 ft. 4 in.
Wheelbase: 7 ft. 2 in.
Width over tyres: 7 ft. 3 in.
Ground clearance, minimum: 10 in.
Rear frame width: 7 ft. 2 in.
Stabiliser spread, operating: 10 ft. 2 in.
Stabiliser overall width, operating: 11 ft. 7 in.

Dimensions

Shovel width (GP shovel): 86 in.
Curb turning radius, with brakes: 11 ft. 4 in.
Curb turning radius, without brakes: 13 ft. 0 in.
Bucket clearance circle, with brakes: 33 ft. 1 in.
Bucket clearance circle, without brakes: 35 ft. 5 in.

Backhoe performance

IMax dig depth (SAE maximum, standard backhoe): 13 ft. 8 in.
Max dig depth (extendable dipperstick extended): 17 ft. 4 in.
JDigging depth (SAE), 610 mm flat bottom: 13 ft. 6 in.
Digging depth (SAE), 2440 mm flat bottom: 12 ft. 5 in.
GReach at ground level, from slew centre: 17 ft. 9 in.
Reach at ground level, from slew centre (extendable dipperstick extended): 21 ft. 4 in.
HReach from centre of rear axle: 21 ft. 3 in.
FMax load-over height: 11 ft. 5 in.
Max load-over height (extendable dipperstick extended): 13 ft. 10 in.
Bucket tearout force: 10,896 lb.
Dipper tearout force: 7,002 lb.
NBucket rotation: 190°
Swing arc: 180°

Loader performance

Shovel capacity: 1.13 cu. yd.
Lift capacity to full height: 6,451 lb.
Shovel breakout force: 9,336 lb.
SDump height: 8 ft. 7 in.
RHeight to bucket hinge pin, maximum: 11 ft. 0 in.
TReach at full height, bucket at 45 deg.: 34.2 in.
UDigging depth below ground, bucket level: 8.3 in.
VLength from front axle centreline to bucket cutting edge: 6 ft. 10 in.
PBucket dump angle, maximum: 45°
QRollback angle at ground level: 40°

Weight

Operating weight (ISO 6016 operating mass): 17,086 lb.
Gross machine mass (ISO 6016): 20,338 lb.
Operating weight (canopy, full fuel, 75 kg operator, 204 kg counterweight) (Standard equipment): 16,217 lb.
Operating weight (typical with cab, extendable dipperstick, 454 kg counterweight): 17,957 lb.

Engine

Engine model: John Deere PowerTech EWL 4.5L 4045HL051 (Synchro-Shuttle) / 4045HL052 (PowerShift), turbocharged
Emissions: EPA Final Tier 4 / EU Stage IV
Displacement: 276 cu. in.
Gross power (Gross peak power at 1,600 rpm): 102 hp
Net power (Net peak power, ISO 9249, at 1,600 rpm): 100 hp
Max torque (Net peak torque, ISO 9249, at 1,500 rpm): 338 lb.-ft.

Transmission

Transmission: 4-speed Synchro-Shuttle with hydraulic reverser (standard); 4-speed PowerShift (optional)
Top speed: 23.6 mph

Hydraulics

Hydraulic system: Open-center system; single gear pump
Pump flow (At 2,200 rpm, backhoe and loader): 28.9 gpm
Max pressure: 3,625 psi

Tyres

Front tyres: 12-16.5 NHS (12) standard basis; options 12.5/80-18 R4 (10), 340/80R18
Rear tyres: 19.5L-24 R4 (12) standard basis; options 21L-24 R4 (12), 500/70R24

Service capacities

Fuel tank: 34.0 gal.
Diesel exhaust fluid (DEF) tank: 3.6 gal.
Engine oil, with filter: 13.7 qt.
Cooling system (Cab; 25.7 L with canopy): 29.1 qt.
Hydraulic system, with tank: 29.0 gal.
Hydraulic tank (Hydraulic reservoir): 11.3 gal.
Torque converter and transmission (Synchro-Shuttle): 19.0 qt.
Rear axle: 19.0 qt.
MFWD front axle housing: 1.7 US gal
MFWD planetary housing (each): 0.2 US gal

Service intervals

Engine oil and filter: 500 hours
Fuel filters (Primary and final): 500 hours
Transmission oil: 1,000 hours
Transmission filter: 1,000 hours
Hydraulic filter: 1,000 hours
Hydraulic oil: 2,000 hours
Axle oil: 2,000 hours
Coolant: 6,000 hours