Case 580SN specs
- dig depth
- 4.41 m
- net power
- 71 kW (95 hp)
- operating weight
- 8,078 kg
- shovel capacity
- 0.79 m³
Case 580SN dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| M | Total travel length | 7.12 m23 ft 4 in |
| N | Total travel height | 3.37 m11 ft 1 in |
| O | Wheelbase | 2.15 m84.5 in |
Case 580SN specifications
Case 580 Super N (580SN) Construction King, Tier 4 Final, North American spec sheet (2023); dimensions for the 4WD machine on 19.5 L x 24.0 tyres. Case sells a separate 580V / 580SV in Africa & the Middle East, but its figures are not used here.
57 figures in 8 groups
Dimensions
- Total travel length (Long Lip bucket with quick coupler)
- 7.1 m
- Cab roof height
- 2.72 m
- Height to top of canopy
- 2.66 m
- Height to top of exhaust stack
- 2.62 m
- Overall transport width
- 2.17 m
- Ground clearance at backhoe frame
- 0.381 m
- Angle of departure
- 19°
- Front wheel tread
- 1.72 m12.0 L x 16.5 front tyres
- Width over tyres
- 2.06 m12.0 L x 16.5 front tyres
- Shovel width (GP shovel)
- 2.09 mBucket cutting edge width, Long Lip bucket
- Stabiliser spread, operating (flip pad)
- 2.82 m
- Turning radius, curb to curb, 4WD engaged, brakes on
- 3.45 m
- Turning radius, curb to curb, 4WD engaged, brakes off
- 4.21 m
Backhoe performance
- Max dig depth
- 4.41 m
- Max dig depth (Extendahoe extended)
- 5.47 m
- Dig depth, 2 ft flat bottom
- 4.37 m
- Dig depth, 8 ft flat bottom
- 4.06 m
- Reach at ground level, from slew centre
- 5.55 m
- Reach at ground level, from slew centre (Extendahoe extended)
- 6.58 m
- Overall reach from rear axle centreline
- 6.66 m
- Max load-over height
- 3.67 mLoading height, standard backhoe
- Loading reach
- 1.41 m
- Bucket tearout force
- 61 kN
- Bucket tearout force (Power Lift)
- 64 kN
- Dipper tearout force
- 39 kN
- Dipper tearout force (Power Lift)
- 40 kN
- Swing arc
- 180°
Loader performance
- Shovel capacity
- 0.79 m³
- Lift capacity to full height
- 3,195 kgLong Lip bucket, calculated value
- Shovel breakout force
- 50 kN
- Breakout force, lift cylinders
- 45 kN
- Dump height
- 2.69 m
- Overall operating height, fully raised
- 4.18 m
- Bucket hinge pin height, fully raised
- 3.42 m
- Bucket hinge pin height at SAE carry
- 0.345 m
- Dump angle at full height
- 47°
- Dump reach at full height, 45° dump, from bumper
- 0.801 m
- Bucket rollback at groundline
- 42°
- Bucket rollback at SAE carry
- 42°
- Digging depth below grade
- 0.155 mLong Lip bucket, bucket flat
- Reach from front axle centreline, bucket on ground
- 2.07 m
Weight
- Operating weight
- 8,078 kg
- Operating weight (configuration 2)
- 8,958 kg
Engine
- Engine model
- FPT F5BFL413B, diesel 4-stroke, turbocharged, HPCR
- Emissions
- Tier 4 Final
- Cylinders
- 4
- Displacement
- 3.4 L
- Gross power
- 72 kW (97 hp)At 2,200 rpm
- Net power
- 71 kW (95 hp)At 2,200 rpm
- Max torque
- 453 NmGross at 1,400 rpm; net 452 N·m
Transmission
- Transmission
- 4F/4R Power Shuttle synchromesh (standard); PowerDrive H-Type 4F/4R powershift with auto shift and direct drive (optional)
- Top speed
- 39.6 km/h
Hydraulics
- Hydraulic system
- Bosch Rexroth Series 31 variable-displacement axial piston pump; closed-center loader valve
- Pump flow
- 156 L/minLoader and backhoe flow at rated engine rpm
- Max pressure
- 238 bar
Tyres
- Front tyres
- 4WD: 12.0 L x 16.5 or 12.5/80 x 18.0, 10-ply; 2WD: 11.0 L x 16.0, 10-ply
- Rear tyres
- 19.5 L x 24.0 or 500/70 R24, 10-ply
Source: Case 580SN Construction King Backhoe Loader specifications (Tier 4 Final, 2023)
Case 580SN service
What each system holds and when Case says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 8 L
- Engine oil and filter, change every
- 500 hours
Fluid: Case Akcela No. 1 Engine Oil SAE 15W-40, API CI-4/SL (Case 580N/580SN/580SN-WT/590SN service manual 84516378 (2011), Capacities)
Grade from Case's 2011 service manual for the 580SN/590SN; confirm it in the Tier 4 Final machine's own manual.
The FPT engine runs hot and loaded under the hood all shift; oil past its hours lets the turbo and bearings wear.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 132 L35.0 gal
- DEF tank
- 13.5 L3.6 gal
- Hydraulic system, with tank
- 118 L125 qt
- Hydraulic reservoir, with filter
- 50.5 L53 qt
- Engine oil, with filter
- 8 L8.5 qt
- Cooling system
- 18 L19.0 qt
- Transmission (4WD standard)
- 19.4 L21 qt
- Rear axle
- 13.6 L14.4 qt
- Front drive axle, differential
- 7.7 L2 US gal
- Front axle planetary hub, each
- 0.5 L0.1 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Hydraulic oil and filters
- 1,000 hours
- Transmission oil and filter
- 1,000 hours
- Front axle oil
- 1,000 hours
- Rear axle oil
- 1,000 hours
Compare the Case 580SN
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Case 580SN
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.12m
- Width
- 2.06m
- Height
- 3.37m
- Weight
- 8.1t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-height): expect a surcharge
Case 580SN prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 9
AED 750 /day
No priced Case 580SN for hire yet: this is all backhoe loaders
No Case 580SN for rent listed right now.
Request a Case 580SNAbout the Case 580SN
The Case 580SN is a 8.08-tonne backhoe loader with a FPT F5BFL413B engine rated at 71 kW (95 hp).
It digs to 4.41 m with the backhoe, carries 0.79 m³ in the front shovel, dumps at 2.69 m and travels at up to 39.6 km/h between sites.
For transport it measures 7.12 m long and 2.06 m wide, and its tank holds 132 L of fuel.
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites.
Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Case 580SN questions
How much does a Case 580SN weigh?
8,078 kg (17,810 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Case 580SN have?
A FPT F5BFL413B engine rated at 71 kW (95 hp) net.
How deep can a Case 580SN dig?
Up to 4.41 m (14 ft 6 in) with the backhoe.
How much does the Case 580SN's front shovel hold?
0.79 m³ (1.0 yd³).
What are the Case 580SN's dimensions?
7.12 m long, 2.06 m wide and 3.37 m high, from Case's dimension drawing.
How do you transport a Case 580SN?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the Case 580SN's fuel tank capacity?
132 L (35.0 gal).
How much oil does a Case 580SN take?
Engine oil: 8 L (8.5 qt). Hydraulic oil: Bosch Rexroth Series 31 variable-displacement axial piston pump; closed-center loader valve.
How often does a Case 580SN need an oil change?
Case sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Case 580SN's main competitors?
The machines nearest it in size are the Cat 430, the John Deere 410 P-Tier, the Cat 420. Each has a side-by-side comparison on EquipmentsFinder.
Is the Case 580SN sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a Case 580SN used for?
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Need a Case 580SN on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
