Case 580SN

Case 580 Super N (580SN) Construction King, Tier 4 Final, North American spec sheet (2023); dimensions for the 4WD machine on 19.5 L x 24.0 tyres. Case sells a separate 580V / 580SV in Africa & the Middle East, but its figures are not used here.

USAGlobal

dig depth: 4.41 m
power: 71 kW (95 hp)
Operating weight: 8,078 kg
Shovel capacity: 0.79 m³

Side

Front

Total travel length: 7.12 m
Total travel height: 3.37 m
Wheelbase: 2.15 m

Dimensions

Total travel length (Long Lip bucket with quick coupler): 7.1 m
Cab roof height: 2.72 m
Height to top of canopy: 2.66 m
Height to top of exhaust stack: 2.62 m
Overall transport width: 2.17 m
Ground clearance at backhoe frame: 0.381 m
Angle of departure: 19°
Front wheel tread (12.0 L x 16.5 front tyres): 1.72 m
Width over tyres (12.0 L x 16.5 front tyres): 2.06 m
Shovel width (GP shovel) (Bucket cutting edge width, Long Lip bucket): 2.09 m
Stabiliser spread, operating (flip pad): 2.82 m
Turning radius, curb to curb, 4WD engaged, brakes on: 3.45 m
Turning radius, curb to curb, 4WD engaged, brakes off: 4.21 m

Backhoe performance

Max dig depth: 4.41 m
Max dig depth (Extendahoe extended): 5.47 m
Dig depth, 2 ft flat bottom: 4.37 m
Dig depth, 8 ft flat bottom: 4.06 m
Reach at ground level, from slew centre: 5.55 m
Reach at ground level, from slew centre (Extendahoe extended): 6.58 m
Overall reach from rear axle centreline: 6.66 m
Max load-over height (Loading height, standard backhoe): 3.67 m
Loading reach: 1.41 m
Bucket tearout force: 61 kN
Bucket tearout force (Power Lift): 64 kN
Dipper tearout force: 39 kN
Dipper tearout force (Power Lift): 40 kN
Swing arc: 180°

Loader performance

Shovel capacity: 0.79 m³
Lift capacity to full height (Long Lip bucket, calculated value): 3,195 kg
Shovel breakout force: 50 kN
Breakout force, lift cylinders: 45 kN
EDump height: 2.69 m
AOverall operating height, fully raised: 4.18 m
BBucket hinge pin height, fully raised: 3.42 m
CBucket hinge pin height at SAE carry: 0.345 m
DDump angle at full height: 47°
FDump reach at full height, 45° dump, from bumper: 0.801 m
GBucket rollback at groundline: 42°
HBucket rollback at SAE carry: 42°
KDigging depth below grade (Long Lip bucket, bucket flat): 0.155 m
LReach from front axle centreline, bucket on ground: 2.07 m

Weight

Operating weight: 8,078 kg
Operating weight (configuration 2): 8,958 kg

Engine

Engine model: FPT F5BFL413B, diesel 4-stroke, turbocharged, HPCR
Emissions: Tier 4 Final
Cylinders: 4
Displacement: 3.4 L
Gross power (At 2,200 rpm): 72 kW (97 hp)
Net power (At 2,200 rpm): 71 kW (95 hp)
Max torque (Gross at 1,400 rpm; net 452 N·m): 453 Nm

Transmission

Transmission: 4F/4R Power Shuttle synchromesh (standard); PowerDrive H-Type 4F/4R powershift with auto shift and direct drive (optional)
Top speed: 39.6 km/h

Hydraulics

Hydraulic system: Bosch Rexroth Series 31 variable-displacement axial piston pump; closed-center loader valve
Pump flow (Loader and backhoe flow at rated engine rpm): 156 L/min
Max pressure: 238 bar

Tyres

Front tyres: 4WD: 12.0 L x 16.5 or 12.5/80 x 18.0, 10-ply; 2WD: 11.0 L x 16.0, 10-ply
Rear tyres: 19.5 L x 24.0 or 500/70 R24, 10-ply

Service capacities

Fuel tank: 132 L
DEF tank: 13.5 L
Hydraulic system, with tank: 118 L
Hydraulic reservoir, with filter: 50.5 L
Engine oil, with filter: 8 L
Cooling system (With heater): 18 L
Transmission (4WD standard): 19.4 L
Rear axle (Differential and planetaries): 13.6 L
Front drive axle, differential (4WD, 580N/580SN): 7.7 L
Front axle planetary hub, each (4WD, 580N/580SN): 0.5 L

Service intervals

Engine oil and filter: 500 hours
Hydraulic oil and filters: 1,000 hours
Transmission oil and filter: 1,000 hours
Front axle oil: 1,000 hours
Rear axle oil: 1,000 hours