Case 580SN

Case 580 Super N (580SN) Construction King, Tier 4 Final, North American spec sheet (2023); dimensions for the 4WD machine on 19.5 L x 24.0 tyres. Case sells a separate 580V / 580SV in Africa & the Middle East, but its figures are not used here.

USAGlobal

dig depth: 14 ft 6 in
power: 95 hp
Operating weight: 17,810 lb
Shovel capacity: 1.0 yd³

Side

Front

Total travel length: 23 ft 4 in
Total travel height: 11 ft 1 in
Wheelbase: 84.5 in

Dimensions

Total travel length (Long Lip bucket with quick coupler): 23 ft 4 in
Cab roof height: 8 ft 11 in
Height to top of canopy: 8 ft 9 in
Height to top of exhaust stack: 8 ft 7 in
Overall transport width: 7 ft 2 in
Ground clearance at backhoe frame: 15.0 in
Angle of departure: 19°
Front wheel tread (12.0 L x 16.5 front tyres): 67.7 in
Width over tyres (12.0 L x 16.5 front tyres): 81.1 in
Shovel width (GP shovel) (Bucket cutting edge width, Long Lip bucket): 82.5 in
Stabiliser spread, operating (flip pad): 9 ft 3 in
Turning radius, curb to curb, 4WD engaged, brakes on: 11 ft 4 in
Turning radius, curb to curb, 4WD engaged, brakes off: 13 ft 10 in

Backhoe performance

Max dig depth: 14 ft 6 in
Max dig depth (Extendahoe extended): 17 ft 11 in
Dig depth, 2 ft flat bottom: 14 ft 4 in
Dig depth, 8 ft flat bottom: 13 ft 4 in
Reach at ground level, from slew centre: 18 ft 2 in
Reach at ground level, from slew centre (Extendahoe extended): 21 ft 7 in
Overall reach from rear axle centreline: 21 ft 10 in
Max load-over height (Loading height, standard backhoe): 12 ft 1 in
Loading reach: 4 ft 7 in
Bucket tearout force: 13,975 lb
Bucket tearout force (Power Lift): 14,452 lb
Dipper tearout force: 8,657 lb
Dipper tearout force (Power Lift): 9,070 lb
Swing arc: 180°

Loader performance

Shovel capacity: 1.0 yd³
Lift capacity to full height (Long Lip bucket, calculated value): 7,044 lb
Shovel breakout force: 10,947 lb
Breakout force, lift cylinders: 9,833 lb
EDump height: 8 ft 10 in
AOverall operating height, fully raised: 13 ft 9 in
BBucket hinge pin height, fully raised: 11 ft 3 in
CBucket hinge pin height at SAE carry: 13.6 in
DDump angle at full height: 47°
FDump reach at full height, 45° dump, from bumper: 31.5 in
GBucket rollback at groundline: 42°
HBucket rollback at SAE carry: 42°
KDigging depth below grade (Long Lip bucket, bucket flat): 6.1 in
LReach from front axle centreline, bucket on ground: 6 ft 10 in

Weight

Operating weight: 17,810 lb
Operating weight (configuration 2): 19,750 lb

Engine

Engine model: FPT F5BFL413B, diesel 4-stroke, turbocharged, HPCR
Emissions: Tier 4 Final
Cylinders: 4
Displacement: 207 in³
Gross power (At 2,200 rpm): 97 hp
Net power (At 2,200 rpm): 95 hp
Max torque (Gross at 1,400 rpm; net 452 N·m): 334 lb·ft

Transmission

Transmission: 4F/4R Power Shuttle synchromesh (standard); PowerDrive H-Type 4F/4R powershift with auto shift and direct drive (optional)
Top speed: 24.6 mph

Hydraulics

Hydraulic system: Bosch Rexroth Series 31 variable-displacement axial piston pump; closed-center loader valve
Pump flow (Loader and backhoe flow at rated engine rpm): 41 gpm
Max pressure: 3,450 psi

Tyres

Front tyres: 4WD: 12.0 L x 16.5 or 12.5/80 x 18.0, 10-ply; 2WD: 11.0 L x 16.0, 10-ply
Rear tyres: 19.5 L x 24.0 or 500/70 R24, 10-ply

Service capacities

Fuel tank: 35.0 gal
DEF tank: 3.6 gal
Hydraulic system, with tank: 125 qt
Hydraulic reservoir, with filter: 53 qt
Engine oil, with filter: 8.5 qt
Cooling system (With heater): 19.0 qt
Transmission (4WD standard): 21 qt
Rear axle (Differential and planetaries): 14.4 qt
Front drive axle, differential (4WD, 580N/580SN): 2 US gal
Front axle planetary hub, each (4WD, 580N/580SN): 0.1 US gal

Service intervals

Engine oil and filter: 500 hours
Hydraulic oil and filters: 1,000 hours
Transmission oil and filter: 1,000 hours
Front axle oil: 1,000 hours
Rear axle oil: 1,000 hours