EF Logo

backhoe loadermade by CaseUSA

Case 590SNSpecs, weight and dimensions

Weight
9.67 t
9,673 kg
Dig depth
4.72 m
15 ft 6 in
Front shovel
0.99 m³
1.3 yd³

Quick answer

The Case 590SN is a 9.67-tonne backhoe loader with a FPT F5BFL413A engine rated at 81 kW (108 hp). It digs to 4.72 m with the backhoe, carries 0.99 m³ in the front shovel, dumps at 2.72 m and travels at up to 40.2 km/h between sites. It suits trenching for pipes and cables. Nearest in weight are the Cat 444 (9.54 t) and the Cat 434 (9.21 t).

Case 590SN (illustration)

How much does a Case 590SN weigh?

The Case 590SN weighs 9.67 tonnes (9,673 kg, 21,325 lb) in working order, with fuel, operator and standard attachment. That is 1% heavier than the Cat 444 (9.54 t) and 5% heavier than the Cat 434 (9.21 t). The figures are from Case 590SN Backhoe Loader spec sheet, Tier 4 Final (North America).

What engine is in the Case 590SN?

The Case 590SN has a FPT F5BFL413A engine rated at 81 kW (108 hp) net, at 2,200 rpm. It displaces 3.4 L (207 in³) and makes 460 Nm (339 lb·ft) of torque. Emissions: Tier 4 Final. The fuel tank holds 132 L (35.0 gal) and the engine takes 8 L (8.5 qt) of oil.

How deep can a Case 590SN dig?

The Case 590SN digs to 4.72 m with the backhoe, carries 0.99 m³ in the front shovel, dumps at 2.72 m and travels at up to 40.2 km/h between sites. In imperial units the dig depth is 15 ft 6 in. On the same row of their sheets, the Cat 444 shows 4.331 m and the Cat 434 shows 4.349 m.

What are the Case 590SN dimensions?

The Case 590SN is 7.25 m (23 ft 9 in) long, 2.36 m (7 ft 9 in) wide and 3.54 m (11 ft 7 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 444 is 5.89 m long, 2.32 m wide and 3.83 m high.

Case 590SN vs Cat 444: what is the difference?

The Case 590SN is 1% heavier than the Cat 444: 9.67 t against 9.54 t. The Case 590SN has more gross power (82 kW against 75 kW), has more torque (460 Nm against 397 Nm) and digs deeper (4.72 m against 4.331 m). Both sets of figures are the makers’ own, for the builds on our sheets.

Case 590SN dimensions

Case 590SN, side view with dimensions (illustration)3.54 m2.15 m7.25 m
Side view
Case 590SN, front view (illustration)2.36 m
Front view
Overall height
3.54 m
Wheelbase
2.15 m
Overall length
7.25 m
Overall width
2.36 m

Illustration; figures from the maker's sheet.

How big is the Case 590SN?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Case 590SN drawn to scale beside a person and a pickup truck. The Case 590SN is 7.25 m long - about 1.4 pickup trucks - and 3.54 m tall, 2 times a person's height.Case 590SN7.25 × 3.54 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Case 590SN is 7.25 m long - about 1.4 pickup trucks - and 3.54 m tall, 2 times a person's height.

Case 590SN specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 3 November 2026.

58 figures in 9 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Total travel length7.25 m[1] p.4
Overall width2.36 mOverall transport width[1] p.4
Total travel height3.54 mTransport height[1] p.4
Cab roof height2.71 mTo top of cab (canopy 2.68 m)[1] p.4
Height to top of exhaust stack2.67 m[1] p.4
Wheelbase2.15 m4WD (2WD 2.13 m)[1] p.4
Reach from front axle centreline, bucket on ground2.05 mLong lip bucket (4 IN 1: 1.99 m)[1] p.3
Dimensions, part 2 of 2
FigureValue (metric)Source
Ground clearance (mainframe)0.36 mGround clearance at backhoe frame[1] p.4
Angle of departure19°[1] p.4
Front wheel tread gauge1.89 m14.0 L x 17.5 tyres[1] p.4
Rear wheel tread gauge1.77 m21.0 L x 24.0 tyres[1] p.4
Shovel width (GP shovel)2.36 mBucket cutting edge width, long lip bucket[1] p.3
Turning radius, 4WD engaged, brakes off4.36 m[1] p.2

Stabilisers

Stabilisers
FigureValue (metric)Source
Stabiliser spread, operating (centres, flip pad)3.26 mCast pad 3.37 m[1] p.5

Backhoe performance

Backhoe performance, part 1 of 2
FigureValue (metric)Source
Max dig depth4.72 m[1] p.5
Max dig depth (Extendahoe extended)5.94 m[1] p.5
Digging depth, 610 mm flat bottom4.69 m[1] p.5
Digging depth, 2440 mm flat bottom4.4 m[1] p.5
Reach at ground level, from slew centre5.98 m[1] p.5
Reach at ground level, from slew centre (Extendahoe extended)7.17 m[1] p.5
Reach from rear axle centreline7.1 m[1] p.5
Backhoe performance, part 2 of 2
FigureValue (metric)Source
Max load-over height4 m[1] p.5
Loading reach1.56 m[1] p.5
Swing arc180°[1] p.5
Bucket rotation198°Mechanical coupler[1] p.5
Bucket tearout force67 kN[1] p.5
Dipper tearout force47 kN[1] p.5

Loader performance

Loader performance, part 1 of 2
FigureValue (metric)Source
Maximum operating height (loader)4.24 mFully raised, long lip bucket[1] p.3
Maximum hinge pin height3.5 mBucket hinge pin fully raised[1] p.3
Bucket hinge pin height at SAE carry0.325 m[1] p.3
Dump angle at full height45°[1] p.3
Dump height2.72 m[1] p.3
Dump reach at full height, from bumper0.741 m45° dump, long lip bucket[1] p.3
Bucket rollback at ground line40°Long lip bucket[1] p.3
Loader performance, part 2 of 2
FigureValue (metric)Source
Bucket rollback at SAE carry46°[1] p.3
Bucket rollback at full heightAdjustable[1] p.3
Loader digging depth0.157 mBelow grade, bucket flat, long lip bucket[1] p.3
Shovel capacity0.99 m³[1] p.2
Lift capacity to full height3,721 kgCalculated, long lip bucket[1] p.3
Lift breakout force51 kN[1] p.3
Shovel breakout force57 kN[1] p.3

Weight

Weight
FigureValue (metric)Source
Operating weight9,673 kg[1] p.1

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelFPT F5BFL413A[1] p.1
EmissionsTier 4 Final[1] p.1
Cylinders4[1] p.1
Displacement3.4 L[1] p.1
Bore99 mm[1] p.1
Engine, part 2 of 2
FigureValue (metric)Source
Stroke110 mm[1] p.1
Gross power82 kW (110 hp)At 2,200 rpm[1] p.1
Net power81 kW (108 hp)At 2,200 rpm[1] p.1
Max torque460 NmGross at 1,400 rpm (net 459 N·m)[1] p.1

Transmission

Transmission
FigureValue (metric)Source
TransmissionPowerDrive H-Type 4F/4R hydraulic clutch shifting with auto shift mode and direct drive[1] p.1
Top speed40.2 km/h[1] p.1

Hydraulics

Hydraulics
FigureValue (metric)Source
Hydraulic systemBosch Rexroth Series 31 variable displacement axial piston pump[1] p.2
Pump flow163 L/minLoader and backhoe flow at rated engine rpm[1] p.2
Max pressure238 barMain relief, standard (Power Lift 250 bar)[1] p.2

Tyres

Tyres
FigureValue (metric)Source
Front tyres14.0 L x 17.5, 10-ply SGL SS4WD[1] p.2
Rear tyres21.0 L x 24.0, 10-ply R44WD[1] p.2

Build: Case 590 Super N (590SN) Construction King backhoe loader, Tier 4 Final FPT F5BFL413A, 4WD, Extendahoe, from Case's North American spec sheet; Case publishes no Gulf sheet for the 590SN, so the North American figures are used.

  1. [1]Case 590SN Backhoe Loader spec sheet, Tier 4 Final (North America)
  2. [2]casece.com 590 Super N Construction King product page (US)

Case 590 generations

The years each was built and what changed, each fact with the page it was read from.

  1. -

    590 Super M (M Series 2 / 3)

    The M Series 590, sold up to 2010 when the N Series replaced it. Part of the M Series 2 line (76 to 98 hp across the M range) listed in 2007. constructionequipmentguide.com

  2. 2010

    590 Super N (N Series)from 2010Current

    Launched in 2010 as the top model of the N Series, replacing the M Series 3. 4.5 L turbo engine, 108 hp (80.5 kW), new fabricated boom, larger bucket pins, Power Lift, Powershift S-Type and H-Type or Powershuttle transmissions. constructionequipmentguide.com

The specs on this page are for the 590 Super N (590SN), Tier 4 Final FPT F5BFL413A, 4WD, Extendahoe, North American spec sheet. Other generations differ in engine, weight and size.

Case 590SN service

What each system holds and when Case says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Loading the 3D machine...

Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is

  1. Engine oil, with filter
    8 L
    Engine oil and filter, change every
    500 hours

    Fluid: Case Akcela No. 1 Engine Oil SAE 15W-40, API CI-4/SL (Case 580N/580SN/580SN-WT/590SN service manual 84516378 (2011), Capacities)

    Grade from Case's 2011 service manual for the 580SN/590SN; confirm it in the Tier 4 Final machine's own manual.

    The FPT engine runs hot and loaded under the hood all shift; oil past its hours lets the turbo and bearings wear.

Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.

Service capacities

Fuel tank
132 L35.0 gal
Diesel exhaust fluid (DEF)
13.5 L3.6 gal
Hydraulic system, with tank
130.7 L138 qt
Hydraulic tank
52.4 L55 qt
Engine oil, with filter
8 L8.5 qt
Cooling system
18 L19.0 qt
Transmission (4WD)
18 L19 qt
Rear axle
18.6 L4.9 US gal
Front drive axle, differential
8.6 L2.3 US gal
Front axle planetary hub, each
1 L0.3 US gal

Service intervals

Engine oil and filter
500 hours
Hydraulic oil and filters
1,000 hours
Transmission oil and filter
1,000 hours
Front axle oil
1,000 hours
Rear axle oil
1,000 hours

Case 590SN against its rivals

The backhoe loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Case 590SN, Cat 444, Cat 434, JCB 4CX: specifications side by side
FigureCase 590SNthis pageCat 444 specsCat 434 specsJCB 4CX specs
Operating weight9,673 kg9,543 kg9,213 kg8,600 kg
Gross power82 kW (110 hp)75 kW (102 hp)69 kW (94 hp)74.2 kW (100hp)
Max torque460 Nm397 Nm384 Nm440 Nm
Max dig depth4.72 m4.331 m4.349 m4.32 m
Reach at ground level, from slew centre5.98 m5.652 m5.655 m5.4 m
Dump height with standard bucket2.72 m2.826 m2.745 m2.69 m
Maximum hinge pin height3.5 m3.615 m3.518 m3.46 m
Shovel capacity0.99 m³1.3 m³1.15 m³1.2 m³
Tipping load at breakout pointnot on its sheet7,109 kg6,858 kgnot on its sheet
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Case 590SN if you need more gross power (82 kW), more torque (460 Nm) and a deeper dig (4.72 m).
  • Pick the Cat 444 if you need a higher dump (2.826 m), a higher hinge pin (3.615 m) and a bigger shovel (1.3 m³).
  • Pick the JCB 4CX if the lightest machine matters: at 8.6 t it weighs the least of the 4, and it leads no other figure here.

Case 590SN prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Typical hire, per daymedian of 9

AED 750 /day

No priced Case 590SN for hire yet: this is all backhoe loaders

Low AED 650High AED 850

No Case 590SN for rent listed right now.

Request a Case 590SN

Does a Case 590SN fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Case 590SN is 2.36 m wide against a 2.34 m door opening and 3.54 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
7.25 m
Width
2.36 m
Height
3.54 m
Weight
9.7 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Case 590SN

For the people who run one: codes, charts and calculators that fit a backhoe loader.

Ranked: Backhoe loaders by dig depth

By maximum dig depth, deepest-digging first. The Case 590SN is 3 of 16; every figure is the maker's.

  1. 1JCB 3DX5.05 m
  2. 2John Deere 410 P-Tier4.85 m
  3. 3Case 590SNThis page4.72 m
  4. 4Cat 4304.61 m
  5. 5Case 580SN4.41 m
  6. 6Cat 4344.35 m
  7. 7Cat 4444.33 m
  8. 8JCB 4CX4.32 m
  9. 9Cat 4324.3 m

Showing 1 to 9 of 16, the machines nearest the Case 590SN by maximum dig depth.

Popular Case backhoe loader models

More Case 590SN questions

What is the Case 590SN lift height?

3.5 m (11 ft 6 in) to the bucket hinge pin at full lift.

How much can a Case 590SN lift?

Its loader lifts 3,721 kg (8,202 lb), calculated, long lip bucket at full height.

How much horsepower does the Case 590SN have?

108 hp (81 kW) net, At 2,200 rpm.

What size is the front bucket on a Case 590SN?

0.99 m³ (1.3 yd³).

How tall is a Case 590SN?

3.54 m (11 ft 7 in) overall.

How wide is a Case 590SN?

2.36 m (7 ft 9 in) overall.

How much torque does a Case 590SN have?

460 Nm (339 lb·ft), gross at 1,400 rpm (net 459 N·m).

What is the hydraulic flow of a Case 590SN?

163 L/min (43 gpm).

What are the Case 590SN's main competitors?

The machines nearest it in size are the Cat 444, the Cat 434 and the JCB 4CX. Each has a side-by-side comparison on EquipmentsFinder.

Is the Case 590SN sold in the UAE?

Not new through a Gulf dealer: it is sold in the USA. Used and imported machines do come up on EquipmentsFinder.

What is a Case 590SN used for?

A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.

Embed this spec card

The Case 590SN's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/case-590" title="Case 590SN specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/case-590">Case 590SN specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Case 590SN on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.