Case 590SN
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Case · backhoe loader

Case 590SN

Case 590 Super N (590SN) Construction King backhoe loader, Tier 4 Final FPT F5BFL413A, 4WD, Extendahoe, from Case's North American spec sheet; Case publishes no Gulf sheet for the 590SN, so the North American figures are used.

USA

dig depth
4.72 m
power
81 kW (108 hp)
Operating weight
9,673 kg
Shovel capacity
0.99 m³
Case 590SN, side view with dimensions (illustration)3.54 m2.15 m7.25 m
Case 590SN, front view (illustration)2.36 m

Dimensions

Overall width (Overall transport width)
2.36 m
Cab roof height (To top of cab (canopy 2.68 m))
2.71 m
Height to top of exhaust stack
2.67 m
Ground clearance (mainframe) (Ground clearance at backhoe frame)
0.36 m
Angle of departure
19°
Front wheel tread gauge (14.0 L x 17.5 tyres)
1.89 m
Rear wheel tread gauge (21.0 L x 24.0 tyres)
1.77 m
Shovel width (GP shovel) (Bucket cutting edge width, long lip bucket)
2.36 m
Turning radius, 4WD engaged, brakes off
4.36 m

Stabilisers

Stabiliser spread, operating (centres, flip pad) (Cast pad 3.37 m)
3.26 m

Backhoe performance

Max dig depth
4.72 m
Max dig depth (Extendahoe extended)
5.94 m
Digging depth, 610 mm flat bottom
4.69 m
Digging depth, 2440 mm flat bottom
4.4 m
Reach at ground level, from slew centre
5.98 m
Reach at ground level, from slew centre (Extendahoe extended)
7.17 m
Reach from rear axle centreline
7.1 m
Max load-over height
4 m
Loading reach
1.56 m
Swing arc
180°
Bucket rotation (Mechanical coupler)
198°
Bucket tearout force
67 kN
Dipper tearout force
47 kN

Loader performance

AMaximum operating height (loader) (Fully raised, long lip bucket)
4.24 m
BMaximum hinge pin height (Bucket hinge pin fully raised)
3.5 m
CBucket hinge pin height at SAE carry
0.325 m
DDump angle at full height
45°
EDump height
2.72 m
FDump reach at full height, from bumper (45° dump, long lip bucket)
0.741 m
GBucket rollback at ground line (Long lip bucket)
40°
HBucket rollback at SAE carry
46°
JBucket rollback at full height
Adjustable
KLoader digging depth (Below grade, bucket flat, long lip bucket)
0.157 m
Shovel capacity
0.99 m³
Lift capacity to full height (Calculated, long lip bucket)
3,721 kg
Lift breakout force
51 kN
Shovel breakout force
57 kN

Weight

Operating weight
9,673 kg

Engine

Engine model
FPT F5BFL413A
Emissions
Tier 4 Final
Cylinders
4
Displacement
3.4 L
Bore
99 mm
Stroke
110 mm
Gross power (At 2,200 rpm)
82 kW (110 hp)
Net power (At 2,200 rpm)
81 kW (108 hp)
Max torque (Gross at 1,400 rpm (net 459 N·m))
460 Nm

Transmission

Transmission
PowerDrive H-Type 4F/4R hydraulic clutch shifting with auto shift mode and direct drive
Top speed
40.2 km/h

Hydraulics

Hydraulic system
Bosch Rexroth Series 31 variable displacement axial piston pump
Pump flow (Loader and backhoe flow at rated engine rpm)
163 L/min
Max pressure (Main relief, standard (Power Lift 250 bar))
238 bar

Tyres

Front tyres (4WD)
14.0 L x 17.5, 10-ply SGL SS
Rear tyres (4WD)
21.0 L x 24.0, 10-ply R4

Service capacities

Fuel tank
132 L
Diesel exhaust fluid (DEF)
13.5 L
Hydraulic system, with tank (Total (Extendahoe 135.7 L))
130.7 L
Hydraulic tank (Reservoir with filter)
52.4 L
Engine oil, with filter
8 L
Cooling system (With heater)
18 L
Transmission (4WD) (Total system)
18 L
Rear axle (Differential, 580SN-WT/590SN)
18.6 L
Front drive axle, differential (4WD, 580SN-WT/590SN)
8.6 L
Front axle planetary hub, each (4WD, 580SN-WT/590SN)
1 L

Service intervals

Engine oil and filter
500 hours
Hydraulic oil and filters
1,000 hours
Transmission oil and filter
1,000 hours
Front axle oil
1,000 hours
Rear axle oil
1,000 hours