Specification sheetIssued 20 November 2026
Case · backhoe loader
Case 590SN
Case 590 Super N (590SN) Construction King backhoe loader, Tier 4 Final FPT F5BFL413A, 4WD, Extendahoe, from Case's North American spec sheet; Case publishes no Gulf sheet for the 590SN, so the North American figures are used.
USA
- dig depth
- 15 ft 6 in
- power
- 108 hp
- Operating weight
- 21,325 lb
- Shovel capacity
- 1.3 yd³
11.6 ft7.1 ft23.8 ft
7.7 ftDimensions
- Overall width (Overall transport width)
- 7 ft 9 in
- Cab roof height (To top of cab (canopy 2.68 m))
- 8 ft 11 in
- Height to top of exhaust stack
- 8 ft 9 in
- Ground clearance (mainframe) (Ground clearance at backhoe frame)
- 14.2 in
- Angle of departure
- 19°
- Front wheel tread gauge (14.0 L x 17.5 tyres)
- 74.3 in
- Rear wheel tread gauge (21.0 L x 24.0 tyres)
- 69.6 in
- Shovel width (GP shovel) (Bucket cutting edge width, long lip bucket)
- 92.7 in
- Turning radius, 4WD engaged, brakes off
- 14 ft 4 in
Stabilisers
- Stabiliser spread, operating (centres, flip pad) (Cast pad 3.37 m)
- 10 ft 9 in
Backhoe performance
- Max dig depth
- 15 ft 6 in
- Max dig depth (Extendahoe extended)
- 19 ft 6 in
- Digging depth, 610 mm flat bottom
- 15 ft 5 in
- Digging depth, 2440 mm flat bottom
- 14 ft 5 in
- Reach at ground level, from slew centre
- 19 ft 7 in
- Reach at ground level, from slew centre (Extendahoe extended)
- 23 ft 6 in
- Reach from rear axle centreline
- 23 ft 3 in
- Max load-over height
- 13 ft 1 in
- Loading reach
- 5 ft 1 in
- Swing arc
- 180°
- Bucket rotation (Mechanical coupler)
- 198°
- Bucket tearout force
- 15,132 lb
- Dipper tearout force
- 10,575 lb
Loader performance
- AMaximum operating height (loader) (Fully raised, long lip bucket)
- 13 ft 11 in
- BMaximum hinge pin height (Bucket hinge pin fully raised)
- 11 ft 6 in
- CBucket hinge pin height at SAE carry
- 12.8 in
- DDump angle at full height
- 45°
- EDump height
- 8 ft 11 in
- FDump reach at full height, from bumper (45° dump, long lip bucket)
- 29.2 in
- GBucket rollback at ground line (Long lip bucket)
- 40°
- HBucket rollback at SAE carry
- 46°
- JBucket rollback at full height
- Adjustable
- KLoader digging depth (Below grade, bucket flat, long lip bucket)
- 6.2 in
- Shovel capacity
- 1.3 yd³
- Lift capacity to full height (Calculated, long lip bucket)
- 8,202 lb
- Lift breakout force
- 11,463 lb
- Shovel breakout force
- 12,776 lb
Weight
- Operating weight
- 21,325 lb
Engine
- Engine model
- FPT F5BFL413A
- Emissions
- Tier 4 Final
- Cylinders
- 4
- Displacement
- 207 in³
- Bore
- 3.90 in
- Stroke
- 4.33 in
- Gross power (At 2,200 rpm)
- 110 hp
- Net power (At 2,200 rpm)
- 108 hp
- Max torque (Gross at 1,400 rpm (net 459 N·m))
- 339 lb·ft
Transmission
- Transmission
- PowerDrive H-Type 4F/4R hydraulic clutch shifting with auto shift mode and direct drive
- Top speed
- 25.0 mph
Hydraulics
- Hydraulic system
- Bosch Rexroth Series 31 variable displacement axial piston pump
- Pump flow (Loader and backhoe flow at rated engine rpm)
- 43 gpm
- Max pressure (Main relief, standard (Power Lift 250 bar))
- 3,450 psi
Tyres
- Front tyres (4WD)
- 14.0 L x 17.5, 10-ply SGL SS
- Rear tyres (4WD)
- 21.0 L x 24.0, 10-ply R4
Service capacities
- Fuel tank
- 35.0 gal
- Diesel exhaust fluid (DEF)
- 3.6 gal
- Hydraulic system, with tank (Total (Extendahoe 135.7 L))
- 138 qt
- Hydraulic tank (Reservoir with filter)
- 55 qt
- Engine oil, with filter
- 8.5 qt
- Cooling system (With heater)
- 19.0 qt
- Transmission (4WD) (Total system)
- 19 qt
- Rear axle (Differential, 580SN-WT/590SN)
- 4.9 US gal
- Front drive axle, differential (4WD, 580SN-WT/590SN)
- 2.3 US gal
- Front axle planetary hub, each (4WD, 580SN-WT/590SN)
- 0.3 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Hydraulic oil and filters
- 1,000 hours
- Transmission oil and filter
- 1,000 hours
- Front axle oil
- 1,000 hours
- Rear axle oil
- 1,000 hours