EF Logo

Thermo King · Engine ECU faults (SR-2/SR-3/SR-4)

Thermo King Fault Code 615

Rail pressure fault

What does Thermo King code 615 mean?

The common rail pressure is not following the target, either too low or too high, so the ECU has logged a rail pressure fault. Urgency: stop now - shut down and fix before working on. Check first: replace the fuel filter and bleed the fuel system.

FaultStop615Thermo King · Engine ECU faults (SR-2/SR-3/SR-4)

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Replace the fuel filter and bleed the fuel system

Then 4 more checks
Code shows hereFAULT615

Where this code shows

Press the alarm key or open the Alarms menu on the controller display to list active alarms.

Checks

0 of 5 done

Causes

  • Fuel filter blocked or air in the fuel
  • High pressure pump worn
  • Rail pressure regulator or relief valve leaking
  • Injector leak-off high

How it failed

You'll notice: Alarm 615 and the engine may lose power, stall or not start; black or white smoke possible.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Common-rail fuel runs at very high pressure. Never open a high-pressure line or fitting with the engine running or just after it stops - a fine fuel jet can pierce skin.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine ECU rail pressure, injectors and EGR

Source

Thermo King Alarm Codes - North America (thermoking.com alarm code list)

This source lists 615 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Thermo King SR-2, SR-3, SR-4 truck and trailer units and related Thermo King controllers (the families the source lists).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.