EF Logo

Thermo King · Temperature sensors (SR-2/SR-3/SR-4)

Thermo King Fault Code 04

Check discharge air sensor

What does Thermo King code 04 mean?

The discharge air sensor, which sits in the cold air leaving the evaporator, gives a reading outside its normal range. The controller uses it for modulation and for the cargo-protection limits in chilled loads. Urgency: check soon - the machine may derate or limit a function. Check first: inspect the discharge sensor probe and lead at the evaporator outlet for rubbing or ice damage.

FaultCheck04Thermo King · Temperature sensors (SR-2/SR-3/SR-4)

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Inspect the discharge sensor probe and lead at the evaporator outlet for rubbing or ice damage

Then 4 more checks
Code shows hereFAULT04

Where this code shows

Press the alarm key or open the Alarms menu on the controller display to list active alarms.

Checks

0 of 5 done

Causes

  • Discharge sensor lead rubbed through against the coil frame or fan housing
  • Frost or water in the probe connector
  • Sensor element failed open or short
  • Pin loose in the main harness plug

How it failed

You'll notice: Alarm 04 appears; in perishable mode the unit loses its low discharge limit, so product can be frozen by overcooling, and the controller may fall back to return air only.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Evaporator, air and compressor temperature sensors

Source

Thermo King Alarm Codes - North America (thermoking.com alarm code list)

This source lists 04 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Thermo King SR-2, SR-3, SR-4 truck and trailer units and related Thermo King controllers (the families the source lists).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.