EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 5798 Fault Code

DEF pump module temperature

What does SPN 5798 mean?

Temperature inside the DEF pump module, used to judge thawing and heater control. How urgent it is depends on the FMI after SPN 5798 - pick it below. Check first: compare the module temperature with ambient after a cold soak.

FaultActiveSPN 5798FMI --J1939 engine ECU
SPN 5798
DEF pump module temperature
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 5798 - pick it below.

What should I check first?

Compare the module temperature with ambient after a cold soak

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 5798?

You'll notice: The controller cannot tell whether the pump module is thawed, so it may hold back dosing.

Find the number shown after SPN 5798 on your display.

  • 2SPN 5798 FMI 2: DEF pump module temperature data is erratic, intermittent or incorrectErratic or implausibleCummins ISX15, PACCAR MX-13
  • 10SPN 5798 FMI 10: DEF pump module temperature is changing at an abnormal rateErratic or implausibleCummins ISX15, PACCAR MX-13

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 5798 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Temperature sensor inside the module failed
  • Module connector corroded
  • Heater relay stuck on
  • Module electronics fault

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 5798 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15, PACCAR MX-13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.