EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 5841 Fault Code

DEF quality low

What does SPN 5841 mean?

The control module's judgement that the DEF measured by the quality sensor is below the accepted concentration. How urgent it is depends on the FMI after SPN 5841 - pick it below. Check first: draw a DEF sample and test the concentration with a refractometer before anything else.

FaultActiveSPN 5841FMI --J1939 engine ECU
SPN 5841
DEF quality low
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 5841 - pick it below.

What should I check first?

Draw a DEF sample and test the concentration with a refractometer before anything else

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 5841?

You'll notice: A DEF quality warning appears and, if the fluid is not corrected, the engine enters an inducement derate.

Find the number shown after SPN 5841 on your display.

  • 14SPN 5841 FMI 14: Special-instruction fault for the DEF quality low; the maker lists a dedicated procedure for itOtherDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 5841 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Diluted DEF: water or diesel added to the tank
  • Bad batch of DEF
  • Quality sensor failed
  • Old DEF degraded by heat

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 5841 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.