EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 520328 Fault Code

DEF system over-pressure

What does SPN 520328 mean?

DEF pressure that rose above what the system should reach, detected by the pressure sensor in the pump module. How urgent it is depends on the FMI after SPN 520328 - pick it below. Check first: run the DEF pressure test and watch the pressure after the stop command; it should fall back.

FaultActiveSPN 520328FMI --J1939 engine ECU
SPN 520328
DEF system over-pressure
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 520328 - pick it below.

What should I check first?

Run the DEF pressure test and watch the pressure after the stop command; it should fall back

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 520328?

You'll notice: Dosing may be stopped to protect the lines, so NOx control is lost until the cause is cleared.

Find the number shown after SPN 520328 on your display.

  • 7SPN 520328 FMI 7: The DEF system over-pressure is not responding or is out of adjustmentPart or controllerDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 520328 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Blocked or frozen DEF line
  • Crystallised nozzle trapping pressure
  • Return valve stuck closed
  • Pressure sensor reading high

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 520328 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.