EF Logo

J1939 · Aftertreatment - DPF

SPN 520360 Fault Code

Soot sensor positive electrode signal

What does SPN 520360 mean?

Signal from the positive electrode of the soot sensor, which shows how much soot is present. How urgent it is depends on the FMI after SPN 520360 - pick it below. Check first: inspect the soot sensor for cracks, heavy soot or contamination.

FaultActiveSPN 520360FMI --J1939 engine ECU
SPN 520360
Soot sensor positive electrode signal
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 520360 - pick it below.

What should I check first?

Inspect the soot sensor for cracks, heavy soot or contamination

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 520360?

You'll notice: The signal is out of range, so the DPF monitor may flag a false leak or a sensor fault.

Find the number shown after SPN 520360 on your display.

  • 3SPN 520360 FMI 3: Soot sensor positive electrode signal signal voltage is above normal, or the circuit is shorted to a high sourceShorted highDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 4SPN 520360 FMI 4: Soot sensor positive electrode signal signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 15SPN 520360 FMI 15: Soot sensor positive electrode signal is above the normal range, least severe levelReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 520360 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Sensor element damaged or shorted
  • Heavy soot or oil on the electrode
  • Connector water ingress
  • Wiring chafed

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 520360 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.