EF Logo

J1939 · Aftertreatment - DPF

SPN 520361 Fault Code

Soot sensor temperature

What does SPN 520361 mean?

Temperature at the soot sensor element, used to keep it inside its working range. How urgent it is depends on the FMI after SPN 520361 - pick it below. Check first: read the soot sensor temperature at warm idle and compare it with the exhaust temperature.

FaultActiveSPN 520361FMI --J1939 engine ECU
SPN 520361
Soot sensor temperature
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 520361 - pick it below.

What should I check first?

Read the soot sensor temperature at warm idle and compare it with the exhaust temperature

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 520361?

You'll notice: The soot sensor may be shut off because it is too hot or too cold to read correctly.

Find the number shown after SPN 520361 on your display.

  • 2SPN 520361 FMI 2: Soot sensor temperature data is erratic, intermittent or incorrectErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 16SPN 520361 FMI 16: Soot sensor temperature is above the normal range, moderately severe levelReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 18SPN 520361 FMI 18: Soot sensor temperature is below the normal range, moderately severe levelReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 520361 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Very hot exhaust
  • Sensor heater stuck on
  • Element temperature sensing fault
  • Sensor mounted without its heat shield

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 520361 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.