Bobcat · Hydraulics
Bobcat Fault Code M0509
Hydraulic charge pressure low
What does Bobcat code M0509 mean?
Charge pressure in the hydrostatic system is under the normal range. Drive performance may fall off. Urgency: check soon - the machine may derate or limit a function. Check first: inspect the charge filter and its restriction switch; a clogged filter limits flow and drops charge pressure.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Inspect the charge filter and its restriction switch; a clogged filter limits flow and drops charge pressure
Then 3 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 4 done
Causes
- Worn charge pump
- Plugged charge filter
- Charge relief valve stuck partly open
- Aerated or hot hydraulic oil
How it failed
You'll notice: The hydrostatic charge pressure is lower than expected.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Lower attachments to the ground and relieve hydraulic pressure before loosening any fitting. Never feel for a leak with your hand - oil under pressure can inject through skin.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Hydraulic charge pressure, workgroup and load sensing pressure
- 05-21Hydraulic charge pressure out of range highOtherCheck soon
- 05-22Hydraulic charge pressure out of range lowOtherCheck soon
- C101D-16Tilt rod pressure sensor out of range lowOtherCheck soon
- C101D-17Tilt rod pressure sensor out of range highOtherCheck soon
- M0509Hydraulic charge pressure lowOtherCheck soon
- M0510Hydraulic charge pressure highOtherCheck soon
- M0511Hydraulic charge pressure extremely highLost messageCheck soon
- M0514Hydraulic charge pressure extremely lowOtherStop now
- M0515Hydraulic charge pressure shutdownOtherStop now
Show the other 18 codesHide the other codes
- 05-09Hydraulic charge pressure lowReal conditionCheck soon
- 05-14Hydraulic charge pressure extremely lowOtherStop now
- 05-15Hydraulic charge pressure shutdown levelReal conditionStop now
- M0521Hydraulic charge pressure out of range highOtherCheck soon
- M0522Hydraulic charge pressure out of range lowOtherCheck soon
- C1080-FAHydraulic charge pressure highLost messageCheck soon
- C1080-FBHydraulic charge pressure extremely highOtherStop now
- C1080-F8Hydraulic charge pressure extremely lowOtherStop now
- C1080-F9Low hydraulic pump pressureOtherCheck soon
- C1097-16Hydraulic charge pressure sensor out of range lowOtherCheck soon
- C1097-17Hydraulic charge pressure sensor out of range highOtherCheck soon
- H1421Lift base pressure out of range highOtherCheck soon
- H1422Lift base pressure out of range lowOtherCheck soon
- M2521Load sense sensor out of range highOtherCheck soon
- M2522Load sense sensor out of range lowOtherCheck soon
- M6204Load moment sensor in errorOtherCheck soon
- M6221Overload warning sensor out of range highReal conditionCheck soon
- M6222Overload warning sensor out of range lowReal conditionCheck soon
Other Bobcat codes: Hydraulics
- VSE001-00Oil temp. sensor, signal above normal range
- VSP001-02Front pump press. sensor, incorrect signal
- VSE001-03Oil temp. sensor, voltage above normal
- VSP001-03Front pump press. sensor, voltage above normal
- VSE001-04Oil temp. sensor, voltage below normal
- VSP001-04Front pump press. sensor, voltage below normal
Related on Equipments Finder
Source
Bobcat Service Code List (rev. 10-20, M-Series/R-Series loaders and M-Series excavators)
This source lists M0509 and its meaning. The guidance on this page is general, not taken from it.
The source covers: M-Series loaders S450-S850 and T450-T870.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
