EF Logo

Bobcat · Hydraulics

Bobcat Fault Code 05‑09

Hydraulic charge pressure low

What does Bobcat code 05-09 mean?

Charge pressure is below normal. Drive performance may fall off while charge pressure is low. Urgency: check soon - the machine may derate or limit a function. Check first: check the hydraulic oil level with the loader arms lowered and the bucket flat; low oil starves the charge pump.

FaultCheck05-09Bobcat · Hydraulics

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check the hydraulic oil level with the loader arms lowered and the bucket flat; low oil starves the charge pump

Then 3 more checks
Code shows hereFAULT05-09

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 4 done

Causes

  • Charge relief valve stuck partly open
  • Plugged charge filter
  • Low hydraulic oil level
  • Worn charge pump

How it failed

You'll notice: Charge pressure is below normal and drive performance starts to fall off, often with slow response on the travel levers.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Lower attachments to the ground and relieve hydraulic pressure before loosening any fitting. Never feel for a leak with your hand - oil under pressure can inject through skin.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Hydraulic charge pressure, workgroup and load sensing pressure

3 other codes on this part are also real condition (05-15, M6221, M6222). When they show together, start at the wiring and connector they share.

Show the other 18 codes
All 27 Hydraulic charge pressure, workgroup and load sensing pressure codes on one page

Source

Bobcat S205 Operation & Maintenance Manual, service codes list

This source lists 05-09 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.