EF Logo

truckmade by Mitsubishi FusoUAE, Global

Mitsubishi Fuso CanterSpecs, dimensions, weight and engine

Engine
Fuso 4P10
Horsepower
148 hp
110 kW
Est. new price
AED 77k-120k

Quick answer

The Mitsubishi Fuso Canter is a truck with a Fuso 4P10 engine rated at 110 kW (148 hp @ 3,500 rpm). Its gross vehicle weight is 6,500 kg. It suits moving machines on low-bed trailers, hauling containers and materials and long-distance and cross-border haulage. Its rivals include the Isuzu NPR and the Hino 300 (2.6 t).

Mitsubishi Fuso Canter (illustration)

How much does a Mitsubishi Fuso Canter weigh?

The Mitsubishi Fuso Canter weighs 2.39 tonnes (2,385 kg, 5,258 lb), its kerb weight. That is 8% lighter than the Hino 300 (2.6 t). The figures are from Habtoor Motors, Fuso Canter specification sheet (UAE). Cab, sleeper, axles and body change the figure, so check the plate of the truck in front of you.

What engine is in the Mitsubishi Fuso Canter?

The Mitsubishi Fuso Canter has a Fuso 4P10 engine rated at 110 kW (148 hp @ 3,500 rpm) gross, 110 kW @ 3,500 rpm; the sheet does not state the rating standard; hp is a conversion. It displaces 3 L (183 cu in) and makes 370 Nm (273 lb-ft @ 1,320 rpm) of torque.

How tall is a Mitsubishi Fuso Canter?

The Mitsubishi Fuso Canter is 2.21 m (7 ft 3 in) tall. It is 6.68 m (21 ft 11 in) long and 2.04 m (6 ft 8 in) wide. The Isuzu NPR is 6.13 m long, 2.06 m wide and 2.31 m high. Road trucks are built to order, so cab, sleeper and wheelbase change these figures.

Mitsubishi Fuso Canter vs Isuzu NPR: what is the difference?

The Mitsubishi Fuso Canter and the Isuzu NPR are both trucks; this is where their sheets differ. The Isuzu NPR has more torque (613 Nm against 370 Nm) and carries more fuel (113.6 L against 100 L). Both sets of figures are the makers’ own, for the builds on our sheets.

Mitsubishi Fuso Canter dimensions

Mitsubishi Fuso Canter, side view with dimensions (illustration)2.21 m3.85 m6.69 m
Side view
Mitsubishi Fuso Canter, front view (illustration)2.04 m
Front view
Overall height
2.21 m
Wheelbase
3.85 m
Overall length
6.69 m
Overall width
2.04 m

Illustration; figures from the maker's sheet.

How big is the Mitsubishi Fuso Canter?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Mitsubishi Fuso Canter drawn to scale beside a person and a pickup truck. The Mitsubishi Fuso Canter is 6.69 m long - about 1.3 pickup trucks - and 2.21 m tall, 1.3 times a person's height.Mitsubishi Fuso Canter6.69 × 2.21 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Mitsubishi Fuso Canter is 6.69 m long - about 1.3 pickup trucks - and 2.21 m tall, 1.3 times a person's height.

Mitsubishi Fuso Canter specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 17 November 2026.

53 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length6.685 m3,850 mm wheelbase, from the maker's dimension drawing; the Habtoor UAE table prints 6,700 mm[3] p.2
Wheelbase3.85 mUAE Canter is also listed on a 3,400 mm wheelbase; other markets add 2,800 and 4,300 mm[1] p.2
Cab to axle3.275 mback of cab to centre of rear axle[3] p.1
Front overhang1.14 m[3] p.2
Rear overhang1.695 m[3] p.2
Overall width2.035 m[1] p.2
Overall height2.21 mchassis cab; the Daimler Truck South Africa sheet prints 2,195 mm and the European sheet 2,225 mm[1] p.2
Cab width1.995 m[4] p.1
Cab length1.625 m[4] p.1
Front track1.665 m[4] p.1
Rear track1.56 m[4] p.1
Dimensions, part 2 of 2
FigureValue (metric)Source
Frame width0.75 m[4] p.1
Frame height at end of frame0.845 m[4] p.1
Ground clearance0.185 m[4] p.1
Front axle to front of body0.625 m[4] p.1
Maximum body length5.725 mcalculated maximum for the 3,850 mm wheelbase; check against the body and application[4] p.1
Recommended distance cab to body0.1 m[4] p.1
Front axle to back of cab0.525 mest.Estimate: front axle to front of body 625 - recommended cab-to-body gap 100 mm (Fuso Europe 7C15 sheet, same FEB71 cab)[4] p.1
Bumper to back of cab (BBC)1.67 mest.Estimate: front overhang 1,145 mm + front axle to back of cab 525 mm, both from the Fuso Europe 7C15 sheet (same FEB71 cab)[4] p.1
Turning circle (kerb to kerb)13.8 m[4] p.1
Turning circle (wall to wall)15.2 m[4] p.1

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelFuso 4P10, 4-cylinder in-line, 4-stroke, water-cooled, turbocharged and intercooled direct-injection common-rail diesel, Euro V (UAE); listed as 4P10-4AT4 on the South African sheetthe Canter is offered with 96 kW / 300 Nm and 110 kW / 370 Nm versions of this engine[1] p.2
EmissionsEuro VWith automatically regenerated DPF[2] p.6
Displacement3 L[1] p.2
Gross power110 kW (148 hp @ 3,500 rpm)110 kW @ 3,500 rpm; the sheet does not state the rating standard; hp is a conversion[1] p.2
Max torque370 Nm370 Nm @ 1,320 rpm; lb-ft is a conversion[1] p.2
Engine, part 2 of 2
FigureValue (metric)Source
Emissions controlEuro V with automatically regenerated diesel particulate filter (DPF); intercooled turbocharger[2] p.6
Fuel system governorElectronic control, common rail[3] p.1
Air cleanerDry paper element with snorkel and rain cap[3] p.1
Alternator12 V, 110 ASouth African FE7-150 sheet[3] p.1
Electrical system12 V / 24 V, as printed on the Habtoor sheet[1] p.2

Transmission

Transmission, part 1 of 2
FigureValue (metric)Source
Gearbox5-speed manual, 5 forward and 1 reverse (standard on the UAE sheet); 6-speed DUONIC dual-clutch automated manual also offeredthe Habtoor brochure p.6 lists the 5-speed as the alternative to DUONIC[1] p.2
Gear ratiosDUONIC M038S6 6-speed: 1st 5.397 to 6th 0.701South African FE7-150 TF AMT sheet; ratio range only[3] p.1
ClutchWet-type dual clutch (DUONIC AMT)[3] p.1
Transmission, part 2 of 2
FigureValue (metric)Source
Rear axle ratio5.714 (D035H, single reduction hypoid)South African FE7-150 sheet[3] p.1
Top speed126 km/hFEB71 models; 120 km/h for the 7.5 t FEB91; 130 km/h on the European 7C15 sheet[1] p.2

Weight

Weight
FigureValue (metric)Source
Gross vehicle weight6,500 kgFEB71GL4SAFC; the 7.5 t FEB91GL4SAFC is listed beside it[1] p.2
Kerb weight2,385 kgFEB71GL4SAFC single cab chassis[1] p.2
Payload4,200 kg'4.2 tons single cab' as printed; body and payload[1] p.2

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Service brakesHydraulic, dual circuit, with ABS and EBD; vacuum servo assist and front and rear disc brakes on the South African sheetthe UAE brochure shows drum brakes as standard on part of the line-up[1] p.2
Parking brakeInternal expanding type on the propeller shaft[3] p.1
Auxiliary brakeExhaust brake[1] p.2
SteeringBall and nut with hydraulic power booster; telescopic and tilt column with steering lock[1] p.2
Chassis, part 2 of 2
FigureValue (metric)Source
Front suspensionLaminated leaf springs with shock absorbers[3] p.1
Rear suspensionLaminated leaf springs with shock absorbers and stabilizer[3] p.1
CabAll-steel cab, 3 seats (1+2); power steering, power windows, central locking, driver and assistant airbags, fabric seats, seat belts for all; heater and defroster, manual air conditioning on the double cab[1] p.2

Tyres

Tyres
FigureValue (metric)Source
TyresSingle front, dual rear; 215/75R17.5 rib tyres[1] p.2
Wheels17.5 x 6-127-9T, 6 studs[1] p.2

Other variants

Other variants, part 1 of 2
FigureValue (metric)Source
FEB71EL4SAFC (E61)3,400 mm wheelbase, 4.2 t payload, GVW 6,500 kg, 5,950 x 2,035 x 2,215 mm, kerb 2,355 kg, 126 km/h[1] p.2
FEB71GL4WAFC (E62)3,850 mm wheelbase, double cab, 4.0 t payload, GVW 6,500 kg, 6,700 x 2,035 x 2,240 mm, kerb 2,610 kg, dual air conditioner[1] p.2
FEB91GL4SAFC (E63)3,850 mm wheelbase, 4.9 t payload, GVW 7,500 kg, 6,700 x 2,035 x 2,210 mm, kerb 2,385 kg, 120 km/h[1] p.2
Other variants, part 2 of 2
FigureValue (metric)Source
FE7-150 TF AMT (South Africa)FEB71GR3SBJ3, GVM 7,500 kg, GCM 8,500 kg, axles 3,100 / 6,000 kg, tare 2,385 kg, 6,685 x 2,035 x 2,195 mm, 4P10-4AT4 110 kW / 370 Nm Euro III, DUONIC AMT, 215/75R17.5, 100 L[3] p.1
Canter 7C15 (Europe)FEB71 on 2,800 / 3,400 / 3,850 / 4,300 mm wheelbases, GVW 7,490 kg, GCW 10,990 kg, axle loads 3,100 / 5,740 kg at 3,850 mm, 130 km/h, 6,690 x 2,098 x 2,225 mm[4] p.1

Build: Fuso Canter FEB71GL4SAFC single cab chassis for the UAE, 3,850 mm wheelbase, 6,500 kg GVW, 4P10 3.0 L 110 kW diesel, from the Habtoor Motors (Fuso UAE) specification sheet. Wheelbase, overhang and cab-position dimensions come from the maker's Daimler Truck South Africa and European data sheets for the same FEB71 chassis.

  1. [1]Habtoor Motors, Fuso Canter specification sheet (UAE)
  2. [2]Habtoor Motors, Fuso Canter brochure (UAE)
  3. [3]Daimler Truck Southern Africa, Fuso Canter FE7-150 TF AMT specification and dimension drawing
  4. [4]Fuso Trucks Europe, Canter technical data sheets, 7C15 (September 2022)

Mitsubishi Fuso Canter generations

The years each was built and what changed, each fact with the page it was read from.

  1. 1985

    Canter (5th generation)1985 to 1993

    Squarer body with single rectangular headlights. Engines 4DR5, 4D32, 4D33 and 4D34 in Japan; 4WD added in 1986. en.wikipedia.org

  2. 1993

    Canter (6th generation)1993 to 2002

    Launched November 1993 in Japan and 1996 in Europe. Europe got the 4M41 and 4M42 turbo engines. en.wikipedia.org

  3. 2002

    Canter FE70 / FE80 (7th generation)2002 to 2010

    Disc brakes and xenon headlights on some models; wide cab 20 mm taller. Europe moved to the Fiat-based 4P10 from 2010. en.wikipedia.org

  4. 2010

    Fuso Canter (8th generation)2010 to 2020

    Renamed Fuso Canter. 4P10 'world engine' 96-129 kW with 5-speed manual or optional 6-speed Duonic dual-clutch gearbox. First eCanter delivered in late 2017. en.wikipedia.org

  5. 2020

    Fuso Canter (October 2020 facelift)2020 to todayCurrent

    Japan facelift with 1.5 t variants replacing the Guts; the engine became 4P10+. en.wikipedia.org

The specs on this page are for the Canter (8th generation, 2010 on), 4P10 3.0 L. Other generations differ in engine, weight and size.

Mitsubishi Fuso Canter service

What each system holds and when Mitsubishi Fuso says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
100 L26.4 US gal

Mitsubishi Fuso Canter against its rivals

The trucks nearest in weight from other makers, figure by figure, each shown at the same scale.

Mitsubishi Fuso Canter, Isuzu NPR, Hino 300, Isuzu NQR: specifications side by side
FigureMitsubishi Fuso Canterthis pageIsuzu NPR specsHino 300 specsIsuzu NQR specs
Kerb weight2,385 kgAbout 2,705-2,795 kg (5,964-6,161 lb), standard cab, depending on wheelbaseest.2,600 kg2,785 kg
Gross power110 kW (148 hp @ 3,500 rpm)not on its sheet102 kW (139 PS @ 2,500 rpm (JIS))110 kW (150 PS @ 2,600 rpm)
Max torque370 Nm613 Nm394 Nm402 Nm
Fuel tank100 L113.6 L100 L100 L
Top speed126 km/hnot on its sheet115 km/hnot on its sheet
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Mitsubishi Fuso Canter if you need more gross power (110 kW) and more speed (126 km/h).
  • Pick the Isuzu NPR if you need more torque (613 Nm) and a bigger fuel tank (113.6 L).

Mitsubishi Fuso Canter prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Mitsubishi Fuso Canter costs about AED 77,000 to AED 120,000, base machine before options, freight and tax - an estimate from new units for sale, checked November 2026. Sources: uae.yallamotor.com, dubai.dubizzle.com.

Mitsubishi Fuso Canter on EquipmentsFinder in the UAE now: none for rent, 2 listed for sale. Too few carry a price to give a Mitsubishi Fuso Canter range, so the figure below is for all trucks.

See all 2

Typical asking price, usedmedian of 37

AED 78,000

No priced Mitsubishi Fuso Canter for sale yet: this is all trucks

Low AED 50,000High AED 200,000

Who is asking for trucks in the UAE

Contractors posted 80 requests for trucks on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (10). Requests name a kind of machine, not a model, so this counts every truck, the Mitsubishi Fuso Canter among them.

Requests, last 12 months
80
For Dubai
33
For Abu Dhabi
21
  • 3XL Tipper Truck Required For Rent20 November 2026
  • 3 Ton Tipper Truck Required For RentAbu Dhabi / 19 November 2026
  • Dump Truck Required For RentAbu Dhabi / 18 November 2026

Open truck requests on the Inquiry BoardPost a request for a Mitsubishi Fuso Canter

Mitsubishi Fuso Canter transport size and weight

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Length
6.69 m
Width
2.04 m
Height
2.21 m
Weight
2.4 t

Tools for a Mitsubishi Fuso Canter

For the people who run one: codes, charts and calculators that fit a truck.

Popular Mitsubishi Fuso truck models

Mitsubishi Fuso Canter fault codes and serial number

J1939 engine fault codesDecode a Mitsubishi Fuso VIN

More Mitsubishi Fuso Canter questions

What is the GVW of a Mitsubishi Fuso Canter?

6,500 kg (6.5 t), the maker's rating for this build.

What is the wheelbase of a Mitsubishi Fuso Canter?

3.85 m (12 ft 7.6 in).

How much horsepower does the Mitsubishi Fuso Canter have?

148 hp (110 kW) gross, 110 kW @ 3,500 rpm; the sheet does not state the rating standard; hp is a conversion.

How much can a Mitsubishi Fuso Canter carry?

Its gross carrying capacity is 4,200 kg (9,259 lb).

What gearbox does a Mitsubishi Fuso Canter have?

5-speed manual, 5 forward and 1 reverse (standard on the UAE sheet); 6-speed DUONIC dual-clutch automated manual also offered.

How wide is a Mitsubishi Fuso Canter?

2.04 m (6 ft 8 in) overall.

How long is a Mitsubishi Fuso Canter?

6.68 m (21 ft 11 in) overall.

How much torque does a Mitsubishi Fuso Canter have?

370 Nm (273 lb-ft @ 1,320 rpm).

What are the Mitsubishi Fuso Canter's main competitors?

The machines nearest it in size are the Hino 300, the Isuzu NQR and the DAF LF. Each has a side-by-side comparison on EquipmentsFinder.

Is the Mitsubishi Fuso Canter sold in the UAE?

Yes. The Mitsubishi Fuso Canter is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Mitsubishi Fuso Canter used for?

A heavy truck: the cab and drive unit that hauls trailers, tippers and tankers between sites, yards and ports. Typical jobs: moving machines on low-bed trailers, hauling containers and materials, long-distance and cross-border haulage, pulling tankers and tippers.

Embed this spec card

The Mitsubishi Fuso Canter's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/mitsubishi-fuso-canter" title="Mitsubishi Fuso Canter specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/mitsubishi-fuso-canter">Mitsubishi Fuso Canter specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Mitsubishi Fuso Canter on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.