Specification sheetIssued 20 November 2026
Mitsubishi Fuso · truck
Mitsubishi Fuso Canter
Fuso Canter FEB71GL4SAFC single cab chassis for the UAE, 3,850 mm wheelbase, 6,500 kg GVW, 4P10 3.0 L 110 kW diesel, from the Habtoor Motors (Fuso UAE) specification sheet. Wheelbase, overhang and cab-position dimensions come from the maker's Daimler Truck South Africa and European data sheets for the same FEB71 chassis.
UAEGlobal
- power
- 110 kW (148 hp @ 3,500 rpm)
- torque
- 370 Nm
- Wheelbase
- 3.85 m
2.21 m3.85 m6.69 m
2.04 mDimensions
- Cab width
- 1.995 m
- Cab length
- 1.625 m
- Front track
- 1.665 m
- Rear track
- 1.56 m
- Frame width
- 0.75 m
- Frame height at end of frame
- 0.845 m
- Ground clearance
- 0.185 m
- Front axle to front of body
- 0.625 m
- Maximum body length (calculated maximum for the 3,850 mm wheelbase; check against the body and application)
- 5.725 m
- Recommended distance cab to body
- 0.1 m
- Front axle to back of cab (Estimate: front axle to front of body 625 - recommended cab-to-body gap 100 mm (Fuso Europe 7C15 sheet, same FEB71 cab))
- 0.525 mest.
- Bumper to back of cab (BBC) (Estimate: front overhang 1,145 mm + front axle to back of cab 525 mm, both from the Fuso Europe 7C15 sheet (same FEB71 cab))
- 1.67 mest.
- Turning circle (kerb to kerb)
- 13.8 m
- Turning circle (wall to wall)
- 15.2 m
Engine
- Engine model (the Canter is offered with 96 kW / 300 Nm and 110 kW / 370 Nm versions of this engine)
- Fuso 4P10, 4-cylinder in-line, 4-stroke, water-cooled, turbocharged and intercooled direct-injection common-rail diesel, Euro V (UAE); listed as 4P10-4AT4 on the South African sheet
- Emissions (With automatically regenerated DPF)
- Euro V
- Displacement
- 3 L
- Gross power (110 kW @ 3,500 rpm; the sheet does not state the rating standard; hp is a conversion)
- 110 kW (148 hp @ 3,500 rpm)
- Max torque (370 Nm @ 1,320 rpm; lb-ft is a conversion)
- 370 Nm
- Emissions control
- Euro V with automatically regenerated diesel particulate filter (DPF); intercooled turbocharger
- Fuel system governor
- Electronic control, common rail
- Air cleaner
- Dry paper element with snorkel and rain cap
- Alternator (South African FE7-150 sheet)
- 12 V, 110 A
- Electrical system
- 12 V / 24 V, as printed on the Habtoor sheet
Transmission
- Gearbox (the Habtoor brochure p.6 lists the 5-speed as the alternative to DUONIC)
- 5-speed manual, 5 forward and 1 reverse (standard on the UAE sheet); 6-speed DUONIC dual-clutch automated manual also offered
- Gear ratios (South African FE7-150 TF AMT sheet; ratio range only)
- DUONIC M038S6 6-speed: 1st 5.397 to 6th 0.701
- Clutch
- Wet-type dual clutch (DUONIC AMT)
- Rear axle ratio (South African FE7-150 sheet)
- 5.714 (D035H, single reduction hypoid)
- Top speed (FEB71 models; 120 km/h for the 7.5 t FEB91; 130 km/h on the European 7C15 sheet)
- 126 km/h
Weight
- Gross vehicle weight (FEB71GL4SAFC; the 7.5 t FEB91GL4SAFC is listed beside it)
- 6,500 kg
- Kerb weight (FEB71GL4SAFC single cab chassis)
- 2,385 kg
- Payload ('4.2 tons single cab' as printed; body and payload)
- 4,200 kg
Chassis
- Service brakes (the UAE brochure shows drum brakes as standard on part of the line-up)
- Hydraulic, dual circuit, with ABS and EBD; vacuum servo assist and front and rear disc brakes on the South African sheet
- Parking brake
- Internal expanding type on the propeller shaft
- Auxiliary brake
- Exhaust brake
- Steering
- Ball and nut with hydraulic power booster; telescopic and tilt column with steering lock
- Front suspension
- Laminated leaf springs with shock absorbers
- Rear suspension
- Laminated leaf springs with shock absorbers and stabilizer
- Cab
- All-steel cab, 3 seats (1+2); power steering, power windows, central locking, driver and assistant airbags, fabric seats, seat belts for all; heater and defroster, manual air conditioning on the double cab
Tyres
- Tyres
- Single front, dual rear; 215/75R17.5 rib tyres
- Wheels
- 17.5 x 6-127-9T, 6 studs
Service capacities
- Fuel tank
- 100 L
Other variants
- FEB71EL4SAFC (E61)
- 3,400 mm wheelbase, 4.2 t payload, GVW 6,500 kg, 5,950 x 2,035 x 2,215 mm, kerb 2,355 kg, 126 km/h
- FEB71GL4WAFC (E62)
- 3,850 mm wheelbase, double cab, 4.0 t payload, GVW 6,500 kg, 6,700 x 2,035 x 2,240 mm, kerb 2,610 kg, dual air conditioner
- FEB91GL4SAFC (E63)
- 3,850 mm wheelbase, 4.9 t payload, GVW 7,500 kg, 6,700 x 2,035 x 2,210 mm, kerb 2,385 kg, 120 km/h
- FE7-150 TF AMT (South Africa)
- FEB71GR3SBJ3, GVM 7,500 kg, GCM 8,500 kg, axles 3,100 / 6,000 kg, tare 2,385 kg, 6,685 x 2,035 x 2,195 mm, 4P10-4AT4 110 kW / 370 Nm Euro III, DUONIC AMT, 215/75R17.5, 100 L
- Canter 7C15 (Europe)
- FEB71 on 2,800 / 3,400 / 3,850 / 4,300 mm wheelbases, GVW 7,490 kg, GCW 10,990 kg, axle loads 3,100 / 5,740 kg at 3,850 mm, 130 km/h, 6,690 x 2,098 x 2,225 mm