EF Logo

J1939 · Fuel system

SPN 95 Fault Code

Engine fuel filter differential pressure

What does SPN 95 mean?

The pressure drop across the fuel filter, taken from a differential sensor or a pair of pressure sensors. The ECM compares it with limits to warn of a restricted filter. How urgent it is depends on the FMI after SPN 95 - pick it below. Check first: compare the reading with a mechanical gauge on both sides of the filter, if the head has test ports.

FaultActiveSPN 95FMI --J1939 engine ECU
SPN 95
Engine fuel filter differential pressure
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 95 - pick it below.

What should I check first?

Compare the reading with a mechanical gauge on both sides of the filter, if the head has test ports

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 95?

You'll notice: The fuel filter restriction reading is wrong, so the filter may be flagged as blocked when it is not, or a plugged filter is not flagged.

Find the number shown after SPN 95 on your display.

  • 3SPN 95 FMI 3: Filter differential pressure sensor signal is high or shorted to supplyShorted highPACCAR MX-13
  • 4SPN 95 FMI 4: Filter differential pressure sensor signal is low or shorted to groundShorted lowPACCAR MX-13
  • 15SPN 95 FMI 15: Value is above the normal range, least severe levelReal conditionCummins ISX15
  • 16SPN 95 FMI 16: Value is above the normal range, moderately severe levelReal conditionCummins ISX15

Checks

0 of 5 done

When to stop

Make the machine safe before you start: on firm level ground, attachments down, key out.

How urgent SPN 95 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Filter genuinely blocked with dirt, wax in cold weather or water, so the pressure drop across it is high
  • Differential pressure sensor or its two sensing hoses blocked, kinked or crossed at the filter head
  • Sensor circuit fault: wiring shorted, open or corroded at the filter head connector
  • Wrong filter fitted, with a different flow rating from the one the ECM expects

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 95 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.