Volvo/Mack · MID 128 engine ECU - air, turbo, EGR and brake
Volvo/Mack Fault Code MID 128 SID 27 FMI 2
Variable geometry turbo actuator - no valid command received
What does Volvo/Mack code MID 128 SID 27 FMI 2 mean?
The variable geometry turbocharger (VGT) smart actuator has not seen a valid command on the CAN 2 data link, so it cannot position the nozzle as the ECM asks. Urgency: check soon - the machine may derate or limit a function. Check first: read the VGT actuator status and position in the scan tool; no response points at the data link or power.
- MID 128
- Which control unit reports it
- SID 27
- Component at fault
- FMI 2
- Erratic or incorrect data
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Read the VGT actuator status and position in the scan tool; no response points at the data link or power
Then 4 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 5 done
Causes
- Damaged CAN 2 harness or connector to the VGT actuator
- No supply or ground at the VGT actuator
- VGT smart remote actuator failed
- Engine ECM not sending the command
How it failed
You'll notice: Boost is low, power drops and you may see smoke.
Erratic or implausibleRead from FMI 2: erratic or incorrect data
The reading jumps, drifts or disagrees with the sensors around it.
- Meter test
- Watch the live value on the service tool while you flex the harness and tap the connector.
- Good result
- A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Variable geometry turbo actuator
- MID 128 SID 27 FMI 2Variable geometry turbo actuator - no valid command receivedErratic or implausibleCheck soon
- MID 128 SID 27 FMI 4Variable geometry turbo actuator shorted to groundShorted lowCheck soon
- MID 128 SID 27 FMI 7Variable geometry turbo actuator mechanical faultPart or controllerCheck soon
- MID 128 SID 27 FMI 9Variable geometry turbo actuator data missing for 2 secondsLost messageStop now
- MID 128 SID 27 FMI 13Variable geometry turbo actuator self-calibration failedPart or controllerCheck soon
Other Volvo/Mack codes: MID 128 engine ECU - air, turbo, EGR and brake
Related on Equipments Finder
Source
This source lists MID 128 SID 27 FMI 2 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Mack MP7/MP8/MP10 engines (CHU, CXU, GU, TD) with the 2010-and-later MID 128 engine ECU; the same MID 128 numbers appear on Volvo D11/D13 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
