EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4794 Fault Code

SCR catalyst system presence

What does SPN 4794 mean?

Check that the SCR catalyst is in place and that the exhaust path past it behaves as expected. How urgent it is depends on the FMI after SPN 4794 - pick it below. Check first: inspect the exhaust for the catalyst canister and any non-standard parts.

FaultActiveSPN 4794FMI --J1939 engine ECU
SPN 4794
SCR catalyst system presence
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4794 - pick it below.

What should I check first?

Inspect the exhaust for the catalyst canister and any non-standard parts

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4794?

You'll notice: A missing or bypassed SCR catalyst is suspected, so the engine can derate and the emissions lamp lights.

Find the number shown after SPN 4794 on your display.

  • 31SPN 4794 FMI 31: The condition behind the SCR catalyst system presence fault exists and is activeReal conditionCummins ISX15, PACCAR MX-13

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 4794 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Catalyst removed or replaced with a dummy
  • Exhaust piping modified
  • Temperature sensors giving wrong readings
  • NOx sensors faulty

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 4794 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15, PACCAR MX-13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.