J1939 · Aftertreatment - DPF
SPN 3703 Fault Code
DPF regeneration blocked by inhibit
What does SPN 3703 mean?
A regeneration is being held off because an inhibit condition is active, such as the inhibit switch or a vehicle state like PTO. How urgent it is depends on the FMI after SPN 3703 - pick it below. Check first: check the inhibit switch position and the PTO state in live data.
- SPN 3703
- DPF regeneration blocked by inhibit
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 3703 - pick it below.
What should I check first?
Check the inhibit switch position and the PTO state in live data
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 3703?
You'll notice: The vehicle will not regenerate until the inhibit is cleared, and soot keeps loading.
Find the number shown after SPN 3703 on your display.
- 31SPN 3703 FMI 31: The condition behind the DPF regeneration blocked by inhibit fault exists and is activeReal conditionCummins ISX15, PACCAR MX-13
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 3703 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Inhibit switch on
- PTO active
- Parking brake not applied for a parked regeneration
- Inhibit message stuck on the data link
Other Aftertreatment - DPF codes
- SPN 3695DPF regeneration inhibit switch
- SPN 3711DPF regeneration blocked by low exhaust temperature
- SPN 81DPF intake pressure
- SPN 3242DPF intake temperature sensor
- SPN 3245DPF outlet temperature
- SPN 3246DPF outlet temperature sensor
- SPN 3249DPF intake temperature
- SPN 3250Diesel oxidation catalyst outlet temperature
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list names SPN 3703 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15, PACCAR MX-13; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
