J1939 · Aftertreatment - DPF
SPN 3251 FMI 16
DPF differential pressure high, moderately severe
What does SPN 3251 FMI 16 mean?
The pressure drop across the DPF is above its limit at the moderately severe level. The filter is loading with soot and needs a regeneration soon. Urgency: check soon - the machine may derate or limit a function. Check first: start a parked regeneration with the service tool and watch the soot load fall.
- FMI 16
- Above normal, moderately severe
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Start a parked regeneration with the service tool and watch the soot load fall
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Soot load building from skipped or interrupted regenerations
- Short trips and long idling that never let the filter heat up
- Delta-P sensing hose partly blocked, making the filter look more loaded than it is
- Doser or temperature sensor fault stopping regeneration
How it failed
You'll notice: The pressure drop across the DPF is above its limit at the moderately severe level.
Real conditionRead from FMI 16: above normal, moderately severe
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 3251 codes
- SPN 3251Aftertreatment 1 diesel particulate filter differential pressure - every FMI
- SPN 3251 FMI 0DPF differential pressure high, most severe
- SPN 3251 FMI 2DPF differential pressure erratic
- SPN 3251 FMI 3DPF differential pressure sensor voltage high
- SPN 3251 FMI 4DPF differential pressure sensor voltage low
- SPN 3251 FMI 10DPF differential pressure abnormal rate of change
- SPN 3251 FMI 21DOC inlet/outlet pressure implausible
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 3251 with FMI 16. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
