EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 3223 Fault Code

NOx raw sensor readiness

What does SPN 3223 mean?

Whether the NOx sensor reaches operating readiness once the exhaust has dried out after start. The sensor must be hot and ready before its values are trusted. How urgent it is depends on the FMI after SPN 3223 - pick it below. Check first: read the sensor ready flag after a warm-up with the exhaust dry; it should go ready within minutes.

FaultActiveSPN 3223FMI --J1939 engine ECU
SPN 3223
NOx raw sensor readiness
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 3223 - pick it below.

What should I check first?

Read the sensor ready flag after a warm-up with the exhaust dry; it should go ready within minutes

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 3223?

You'll notice: The NOx reading is not used, so the SCR dose falls back and an SCR or NOx warning appears.

Find the number shown after SPN 3223 on your display.

  • 7SPN 3223 FMI 7: The NOx raw sensor readiness is not responding or is out of adjustmentPart or controllerDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 3223 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • NOx sensor heater failing
  • Water still in the exhaust path
  • Sensor control unit fault
  • Connector corrosion

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 3223 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.