J1939 · Turbo
SPN 1176 Fault Code
Engine turbocharger 1 compressor intake pressure
What does SPN 1176 mean?
Air pressure at the turbo compressor inlet, read by a sensor ahead of the compressor. The ECM uses it to judge air filter restriction and to calculate boost ratio. How urgent it is depends on the FMI after SPN 1176 - pick it below. Check first: check the air filter restriction indicator and the filter condition.
- SPN 1176
- Engine turbocharger 1 compressor intake pressure
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 1176 - pick it below.
What should I check first?
Check the air filter restriction indicator and the filter condition
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 1176?
You'll notice: The turbo compressor inlet pressure is wrong, usually from a restricted air intake, so the engine loses power and boost and may smoke.
Find the number shown after SPN 1176 on your display.
- 1SPN 1176 FMI 1: Value is below the normal range, most severe levelReal conditionCummins ISX15
- 18SPN 1176 FMI 18: Value is below the normal range, moderately severe levelReal conditionCummins ISX15
Checks
0 of 5 done
When to stop
Make the machine safe before you start: on firm level ground, attachments down, key out.
How urgent SPN 1176 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Air filter or intake duct restricted, so pressure at the compressor inlet falls below normal
- Collapsed intake hose or blocked pre-cleaner
- Compressor inlet pressure sensor or its wiring faulty
- Intake leak after the sensor letting in unfiltered air
Other Turbo codes
- SPN 102Intake manifold (boost) pressure
- SPN 1127Turbocharger boost (intake manifold) pressure
- SPN 641Variable geometry turbo (VGT) actuator
- SPN 642Variable geometry turbocharger actuator 2
- SPN 1172Turbo compressor inlet temperature sensor
- SPN 1188Turbocharger wastegate actuator
- SPN 1209Exhaust gas pressure
- SPN 2629Turbocharger compressor outlet temperature
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list names SPN 1176 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
