EF Logo

wheel loadermade by KomatsuUSA, Global

Komatsu WA380-8Specs, weight and dimensions

Bucket
3.3 m³
4.3 yd3
Weight
18.5 t
18,455 kg
Est. new price
$230k-$340k

Quick answer

The Komatsu WA380-8 is an 18.5-tonne wheel loader with a Komatsu SAA6D107E-3 engine rated at 143 kW (191 HP). It carries a 3.3 m³ bucket, has a full-turn tipping load of 13,440 kg and dumps with 2.95 m clearance. It suits loading trucks from stockpiles and moving sand, aggregate and soil around site. Its rivals include the Cat 950 (18.1 t) and the John Deere 644 (18.7 t).

Komatsu WA380-8 (illustration)

How much does a Komatsu WA380-8 weigh?

The Komatsu WA380-8 weighs 18.5 tonnes (18,455 kg, 40,686 lb) in working order, with fuel, operator and standard attachment. That is 2% heavier than the Cat 950 (18.1 t) and 1% lighter than the John Deere 644 (18.7 t). The figures are from Komatsu WA380-8 brochure AESS882-04 (Komatsu America, hosted by SMS Equipment).

What engine is in the Komatsu WA380-8?

The Komatsu WA380-8 has a Komatsu SAA6D107E-3 engine rated at 143 kW (191 HP) net, ISO 9249 / SAE J1349 @ 2,100 rpm. It displaces 6.7 L (408 in3). Emissions: EPA Tier 4 Final. The fuel tank holds 300 L (79.3 US gal) and the engine takes 23 L (6.1 US gal) of oil.

What bucket size does the Komatsu WA380-8 have?

The Komatsu WA380-8 carries a 3.3 m³ bucket, has a full-turn tipping load of 13,440 kg and dumps with 2.95 m clearance. In imperial units the bucket capacity is 4.3 yd3. The sheet notes: heaped, general-purpose bucket with bolt-on cutting edge (struck 2.9 m³). On the same row of their sheets, the Cat 950 shows 3.1 m³ and the John Deere 644 shows 3.3 m³.

What are the Komatsu WA380-8 dimensions?

The Komatsu WA380-8 is 8.31 m (27 ft 3 in) long, 2.78 m (9 ft 1 in) wide and 3.39 m (11 ft 1 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 950 is 8.24 m long, 2.80 m wide and 3.46 m high.

Komatsu WA380-8 vs Cat 950: what is the difference?

The Komatsu WA380-8 is 2% heavier than the Cat 950: 18.5 t against 18.1 t. The Komatsu WA380-8 dumps higher (2.95 m against 2.844 m), lifts its hinge pin higher (4.095 m against 3.981 m) and takes a bigger bucket (3.3 m³ against 3.1 m³). Both sets of figures are the makers’ own, for the builds on our sheets.

Komatsu WA380-8 vs Cat 950, every figure

Komatsu WA380-8 dimensions

Komatsu WA380-8, side view with dimensions (illustration)3.39 m3.3 m8.31 m
Side view
Komatsu WA380-8, front view (illustration)2.78 m
Front view
Overall height
3.39 m
Wheelbase
3.3 m
Overall length
8.31 m
Overall width
2.78 m

Illustration; figures from the maker's sheet.

How big is the Komatsu WA380-8?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu WA380-8 drawn to scale beside a person and a pickup truck. The Komatsu WA380-8 is 8.31 m long - about 1.6 pickup trucks - and 3.39 m tall, 1.9 times a person's height.Komatsu WA380-88.31 × 3.39 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Komatsu WA380-8 is 8.31 m long - about 1.6 pickup trucks - and 3.39 m tall, 1.9 times a person's height.

Komatsu WA380-8 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

61 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length (bucket on ground)8.31 m3.3 m³ general-purpose bucket[1] p.15
Wheelbase3.3 m[1] p.15
Height to top of cab3.39 mOverall height, ROPS cab[1] p.15
Height to top of exhaust3.1 mOverall height, top of the stack[1] p.15
Ground clearance0.455 m[1] p.15
Hitch height1.15 m[1] p.15
Tread width2.16 mCentre of tread to centre of tread[1] p.15
Width over tyres2.78 m[1] p.15
Bucket width2.905 m[1] p.15
Hinge pin height (max lift)4.095 mStandard boom (high-lift boom 4625 mm)[1] p.15
Hinge pin height (carry)0.52 mStandard boom (high-lift boom 680 mm)[1] p.15
Dimensions, part 2 of 2
FigureValue (metric)Source
Dump clearance at max lift2.95 mAt bucket edge, 45 deg dump angle[1] p.15
Reach at max lift1.15 mAt max height and 45 deg dump angle[1] p.15
Reach at 2130 mm clearance1.735 m7 ft clearance, 45 deg dump angle[1] p.15
Reach with arm horizontal2.59 mBucket level[1] p.15
Operating height (fully raised)5.6 m[1] p.15
Loader clearance circle diameter14.44 mBucket at carry, outside corner of bucket[1] p.15
Turning radius (centre of outside tyre)6.32 m[1] p.14
Digging depth (0 deg)0.06 m[1] p.15
Digging depth (10 deg)0.29 m[1] p.15
Articulation angle35°Steering angle 35 degrees each direction (40 degrees to max end stop); from SMS Equipment (Komatsu dealer) copy of the Komatsu brochure[1] p.14

Weight

Weight
FigureValue (metric)Source
Operating weight18,455 kgIncludes lubricants, coolant, full fuel tank, ROPS cab and operator[1] p.15
Operating weight range18 385 – 19 020 kg[1] p.1
Bucket weight1,610 kg[1] p.15

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu SAA6D107E-3[1] p.14
EmissionsEPA Tier 4 Final[1] p.14
TypeWater-cooled, 4-cycle, turbocharged and after-cooled diesel; electronic all-speed governor[1] p.14
Cylinders6[1] p.14
Bore107 mm[1] p.14
Engine, part 2 of 2
FigureValue (metric)Source
Stroke124 mm[1] p.14
Displacement6.7 L[1] p.14
Gross power143 kW (192 HP)SAE J1995 @ 2,100 rpm[1] p.14
Net power143 kW (191 HP)ISO 9249 / SAE J1349 @ 2,100 rpm[1] p.14
Fan driveHydraulic[1] p.14

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity3.3 m³Heaped, general-purpose bucket with bolt-on cutting edge (struck 2.9 m³)[1] p.15
Bucket capacity range2.7 – 3.3 m³[1] p.1
Static tipping load (straight)15,440 kg[1] p.15
Static tipping load (full turn)13,440 kg40 deg articulation[1] p.15
Performance, part 2 of 2
FigureValue (metric)Source
Breakout force158 kN[1] p.15
Top speed36.1 km/hForward 4th gear, P-mode, 23.5-25 tyres; 37.5 km/h with lock-up clutch on[1] p.14
Hydraulic cycle time5.9 s raise / 1.8 s dump / 3.3 s lower (rated load in bucket)[1] p.14

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow205 L/minLoader control piston pump at rated rpm[1] p.14
Max pressure314 barLoader relief setting 31.4 MPa[1] p.14
Steering pump flow137 L/minAt rated rpm; relief 24.5 MPa[1] p.14
Boom cylinders2 × 130 mm bore × 713 mm stroke[1] p.14
Hydraulics, part 2 of 2
FigureValue (metric)Source
Bucket cylinder1 × 150 mm bore × 535 mm stroke[1] p.14
Steering cylinders2 × 75 mm bore × 442 mm stroke[1] p.14
Control valve2-spool; boom raise/hold/lower/float, bucket tilt-back/hold/dump[1] p.14

Transmission

Transmission, part 1 of 2
FigureValue (metric)Source
TransmissionAutomatic full-powershift, countershaft type; 3-element, 1-stage, 2-phase torque converter; 4F/4R[1] p.14
Forward 16.6 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Forward 211.7 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Forward 320.9 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Forward 436.1 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Reverse 17.1 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Transmission, part 2 of 2
FigureValue (metric)Source
Reverse 212.4 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Reverse 322.3 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Reverse 438.6 km/hP-mode, 23.5-25 tyres, lock-up off[1] p.14
Axles and final driveFour-wheel drive; front fixed, rear centre-pin oscillating (26 deg total); planetary final drive[1] p.14
BrakesHydraulically actuated wet disc brakes on four wheels; wet disc parking brake[1] p.14
Steering angle35°Each side; 40 deg to max end stop[1] p.14

Tyres

Tyres
FigureValue (metric)Source
Tyres23.5R25 (L3)Tyres the dimension table is based on[1] p.15

Build: Komatsu WA380-8 (EPA Tier 4 Final, SAA6D107E-3) per the Komatsu America brochure AESS882-04 (dealer-hosted copy), standard boom, 23.5R25 (L3) tyres, 3.3 m³ heaped general-purpose bucket with bolt-on cutting edge. The WA380-6 it replaced is not covered.

  1. [1]Komatsu WA380-8 brochure AESS882-04 (Komatsu America, hosted by SMS Equipment)
  2. [2]Komatsu WA380-8 product page (Komatsu America)

Komatsu WA380-8 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
300 L79.3 US gal
DEF tank
36 L9.5 US gal
Cooling system
60.6 L16.0 US gal
Engine oil
23 L6.1 US gal
Hydraulic system
142 L37.5 US gal
Torque converter and transmission
54 L14.3 US gal
Axle, front
40 L10.6 US gal
Axle, rear
40 L10.6 US gal

Komatsu WA380-8 against its rivals

The wheel loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu WA380-8, Cat 950, John Deere 644, Cat 962: specifications side by side
FigureKomatsu WA380-8this pageCat 950 specsJohn Deere 644 specsCat 962 specs
Operating weight18,455 kg18,076 kg18,709 kg19,123 kg
Gross power143 kW (192 HP)186 kW (249 hp)194 kW (260 hp)195 kW (265 hp)
Max torquenot on its sheet1,236 Nm1,100 Nm1,050 Nm
Digging depth0.06 mnot on its sheetnot on its sheet0.09 m
Dump clearance at max lift2.95 m2.844 m2.87 m3.007 m
Hinge pin height (max lift)4.095 m3.981 m4.09 m4.182 m
Bucket capacity3.3 m³3.1 m³3.3 m³3.4 m³
Static tipping load (straight)15,440 kg12,639 kg14,067 kg13,550 kg
Breakout force158 kN152 kN153 kN146 kN
Every figureFull sheetKomatsu WA380-8 vs Cat 950

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Komatsu WA380-8 if you need a higher tipping load (15,440 kg) and more digging force (158 kN).
  • Pick the Cat 950 if you need more torque (1,236 Nm).
  • Pick the Cat 962 if you need more gross power (195 kW), a deeper dig (0.09 m) and a higher dump (3.007 m).

Komatsu WA380-8 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Komatsu WA380-8 costs about $230,000 to $340,000 (USD), base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai, m.fastline.com.

See all 2

Typical hire, per daymedian of 17

AED 1,200 /day

No priced Komatsu WA380-8 for hire yet: this is all wheel loaders

Low AED 600High AED 1,700

Does a Komatsu WA380-8 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu WA380-8 is 2.78 m wide against a 2.34 m door opening and 3.39 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
8.31 m
Width
2.78 m
Height
3.39 m
Weight
18.5 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu WA380-8

For the people who run one: codes, charts and calculators that fit a wheel loader.

Same class: 20 ton wheel loaders

20 ton wheel loaders with an operating weight of 17 to 22 t, lightest first. The Komatsu WA380-8 is 4 of 8; every figure is the maker's.

  1. 1XCMG ZL50GN17.2 t
  2. 2SDLG L956F17.5 t
  3. 3Cat 95018.1 t
  4. 4Komatsu WA380-8This page18.5 t
  5. 5John Deere 64418.7 t
  6. 6Cat 96219.1 t
  7. 7LiuGong 856H19.3 t
  8. 8Volvo L12019.6 t

Popular Komatsu wheel loader models

Komatsu WA380-8 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu WA380-8 questions

What is the tipping load of a Komatsu WA380-8?

13,440 kg (29,630 lb), 40 deg articulation: the safe working load is about half of it.

What is the Komatsu WA380-8 lift height?

4.095 m (13' 5") to the bucket hinge pin at full lift.

How much horsepower does the Komatsu WA380-8 have?

191 hp (143 kW) net, ISO 9249 / SAE J1349 @ 2,100 rpm.

What is the dump height of a Komatsu WA380-8?

2.95 m (9' 8") of clearance at maximum lift, at bucket edge, 45 deg dump angle.

How tall is a Komatsu WA380-8?

3.39 m (11 ft 1 in) overall.

What is the breakout force of a Komatsu WA380-8?

158 kN (35,494 lbf) at the bucket edge.

How wide is a Komatsu WA380-8?

2.78 m (9 ft 1 in) overall.

What is the dump reach of a Komatsu WA380-8?

1.15 m (3' 9") at maximum lift, at max height and 45 deg dump angle.

What are the Komatsu WA380-8's main competitors?

The machines nearest it in size are the John Deere 644, the Cat 950 and the Cat 962. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu WA380-8 sold in the UAE?

Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a Komatsu WA380-8 used for?

A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material. Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.

Embed this spec card

The Komatsu WA380-8's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-wa380" title="Komatsu WA380-8 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-wa380">Komatsu WA380-8 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu WA380-8 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.