Komatsu WA380-8
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · wheel loader

Komatsu WA380-8

Komatsu WA380-8 (EPA Tier 4 Final, SAA6D107E-3) per the Komatsu America brochure AESS882-04 (dealer-hosted copy), standard boom, 23.5R25 (L3) tyres, 3.3 m³ heaped general-purpose bucket with bolt-on cutting edge. The WA380-6 it replaced is not covered.

USAGlobal

Bucket capacity
3.3 m³
power
143 kW (191 HP)
Operating weight
18,455 kg
Static tipping load (full turn)
13,440 kg
Komatsu WA380-8, side view with dimensions (illustration)3.39 m3.3 m8.31 m
Komatsu WA380-8, front view (illustration)2.78 m

Dimensions

Tread width (Centre of tread to centre of tread)
2.16 m
Width over tyres
2.78 m
Bucket width
2.905 m
Loader clearance circle diameter (Bucket at carry, outside corner of bucket)
14.44 m
Turning radius (centre of outside tyre)
6.32 m
Digging depth (0 deg)
0.06 m
Digging depth (10 deg)
0.29 m
Articulation angle (Steering angle 35 degrees each direction (40 degrees to max end stop); from SMS Equipment (Komatsu dealer) copy of the Komatsu brochure)
35°

Weight

Operating weight (Includes lubricants, coolant, full fuel tank, ROPS cab and operator)
18,455 kg
Operating weight range
18 385 – 19 020 kg
Bucket weight
1,610 kg

Engine

Engine model
Komatsu SAA6D107E-3
Emissions
EPA Tier 4 Final
Type
Water-cooled, 4-cycle, turbocharged and after-cooled diesel; electronic all-speed governor
Cylinders
6
Bore
107 mm
Stroke
124 mm
Displacement
6.7 L
Gross power (SAE J1995 @ 2,100 rpm)
143 kW (192 HP)
Net power (ISO 9249 / SAE J1349 @ 2,100 rpm)
143 kW (191 HP)
Fan drive
Hydraulic

Performance

Bucket capacity (Heaped, general-purpose bucket with bolt-on cutting edge (struck 2.9 m³))
3.3 m³
Bucket capacity range
2.7 – 3.3 m³
Static tipping load (straight)
15,440 kg
Static tipping load (full turn) (40 deg articulation)
13,440 kg
Breakout force
158 kN
Top speed (Forward 4th gear, P-mode, 23.5-25 tyres; 37.5 km/h with lock-up clutch on)
36.1 km/h
Hydraulic cycle time
5.9 s raise / 1.8 s dump / 3.3 s lower (rated load in bucket)

Hydraulics

Pump flow (Loader control piston pump at rated rpm)
205 L/min
Max pressure (Loader relief setting 31.4 MPa)
314 bar
Steering pump flow (At rated rpm; relief 24.5 MPa)
137 L/min
Boom cylinders
2 × 130 mm bore × 713 mm stroke
Bucket cylinder
1 × 150 mm bore × 535 mm stroke
Steering cylinders
2 × 75 mm bore × 442 mm stroke
Control valve
2-spool; boom raise/hold/lower/float, bucket tilt-back/hold/dump

Transmission

Transmission
Automatic full-powershift, countershaft type; 3-element, 1-stage, 2-phase torque converter; 4F/4R
Forward 1 (P-mode, 23.5-25 tyres, lock-up off)
6.6 km/h
Forward 2 (P-mode, 23.5-25 tyres, lock-up off)
11.7 km/h
Forward 3 (P-mode, 23.5-25 tyres, lock-up off)
20.9 km/h
Forward 4 (P-mode, 23.5-25 tyres, lock-up off)
36.1 km/h
Reverse 1 (P-mode, 23.5-25 tyres, lock-up off)
7.1 km/h
Reverse 2 (P-mode, 23.5-25 tyres, lock-up off)
12.4 km/h
Reverse 3 (P-mode, 23.5-25 tyres, lock-up off)
22.3 km/h
Reverse 4 (P-mode, 23.5-25 tyres, lock-up off)
38.6 km/h
Axles and final drive
Four-wheel drive; front fixed, rear centre-pin oscillating (26 deg total); planetary final drive
Brakes
Hydraulically actuated wet disc brakes on four wheels; wet disc parking brake
Steering angle (Each side; 40 deg to max end stop)
35°

Tyres

Tyres (Tyres the dimension table is based on)
23.5R25 (L3)

Service capacities

Fuel tank
300 L
DEF tank
36 L
Cooling system
60.6 L
Engine oil
23 L
Hydraulic system
142 L
Torque converter and transmission
54 L
Axle, front
40 L
Axle, rear
40 L