Specification sheetIssued 20 November 2026
Komatsu · wheel loader
Komatsu WA380-8
Komatsu WA380-8 (EPA Tier 4 Final, SAA6D107E-3) per the Komatsu America brochure AESS882-04 (dealer-hosted copy), standard boom, 23.5R25 (L3) tyres, 3.3 m³ heaped general-purpose bucket with bolt-on cutting edge. The WA380-6 it replaced is not covered.
USAGlobal
- Bucket capacity
- 4.3 yd3
- power
- 191 HP
- Operating weight
- 40,686 lb
- Static tipping load (full turn)
- 29,630 lb
11.1 ft10.8 ft27.3 ft
9.1 ftDimensions
- Tread width (Centre of tread to centre of tread)
- 7' 1"
- Width over tyres
- 9' 1"
- Bucket width
- 9' 6"
- Loader clearance circle diameter (Bucket at carry, outside corner of bucket)
- 47' 5"
- Turning radius (centre of outside tyre)
- 20' 9"
- Digging depth (0 deg)
- 0' 2"
- Digging depth (10 deg)
- 0' 11"
- Articulation angle (Steering angle 35 degrees each direction (40 degrees to max end stop); from SMS Equipment (Komatsu dealer) copy of the Komatsu brochure)
- 35°
Weight
- Operating weight (Includes lubricants, coolant, full fuel tank, ROPS cab and operator)
- 40,686 lb
- Operating weight range
- 18 385 – 19 020 kg
- Bucket weight
- 3,549 lb
Engine
- Engine model
- Komatsu SAA6D107E-3
- Emissions
- EPA Tier 4 Final
- Type
- Water-cooled, 4-cycle, turbocharged and after-cooled diesel; electronic all-speed governor
- Cylinders
- 6
- Bore
- 4.21"
- Stroke
- 4.88"
- Displacement
- 408 in3
- Gross power (SAE J1995 @ 2,100 rpm)
- 192 HP
- Net power (ISO 9249 / SAE J1349 @ 2,100 rpm)
- 191 HP
- Fan drive
- Hydraulic
Performance
- Bucket capacity (Heaped, general-purpose bucket with bolt-on cutting edge (struck 2.9 m³))
- 4.3 yd3
- Bucket capacity range
- 2.7 – 3.3 m³
- Static tipping load (straight)
- 34,039 lb
- Static tipping load (full turn) (40 deg articulation)
- 29,630 lb
- Breakout force
- 35,494 lbf
- Top speed (Forward 4th gear, P-mode, 23.5-25 tyres; 37.5 km/h with lock-up clutch on)
- 22.4 mph
- Hydraulic cycle time
- 5.9 s raise / 1.8 s dump / 3.3 s lower (rated load in bucket)
Hydraulics
- Pump flow (Loader control piston pump at rated rpm)
- 54.2 US gal/min
- Max pressure (Loader relief setting 31.4 MPa)
- 4,554 psi
- Steering pump flow (At rated rpm; relief 24.5 MPa)
- 36.2 US gal/min
- Boom cylinders
- 2 × 130 mm bore × 713 mm stroke
- Bucket cylinder
- 1 × 150 mm bore × 535 mm stroke
- Steering cylinders
- 2 × 75 mm bore × 442 mm stroke
- Control valve
- 2-spool; boom raise/hold/lower/float, bucket tilt-back/hold/dump
Transmission
- Transmission
- Automatic full-powershift, countershaft type; 3-element, 1-stage, 2-phase torque converter; 4F/4R
- Forward 1 (P-mode, 23.5-25 tyres, lock-up off)
- 4.1 mph
- Forward 2 (P-mode, 23.5-25 tyres, lock-up off)
- 7.3 mph
- Forward 3 (P-mode, 23.5-25 tyres, lock-up off)
- 13.0 mph
- Forward 4 (P-mode, 23.5-25 tyres, lock-up off)
- 22.4 mph
- Reverse 1 (P-mode, 23.5-25 tyres, lock-up off)
- 4.4 mph
- Reverse 2 (P-mode, 23.5-25 tyres, lock-up off)
- 7.7 mph
- Reverse 3 (P-mode, 23.5-25 tyres, lock-up off)
- 13.9 mph
- Reverse 4 (P-mode, 23.5-25 tyres, lock-up off)
- 24.0 mph
- Axles and final drive
- Four-wheel drive; front fixed, rear centre-pin oscillating (26 deg total); planetary final drive
- Brakes
- Hydraulically actuated wet disc brakes on four wheels; wet disc parking brake
- Steering angle (Each side; 40 deg to max end stop)
- 35°
Tyres
- Tyres (Tyres the dimension table is based on)
- 23.5R25 (L3)
Service capacities
- Fuel tank
- 79.3 US gal
- DEF tank
- 9.5 US gal
- Cooling system
- 16.0 US gal
- Engine oil
- 6.1 US gal
- Hydraulic system
- 37.5 US gal
- Torque converter and transmission
- 14.3 US gal
- Axle, front
- 10.6 US gal
- Axle, rear
- 10.6 US gal