EF Logo

Cat 950 vs Komatsu WA380-8

The Komatsu WA380-8 is the heavier machine, at 18.5 t against 18.1 t, and the Cat 950 has more power (172 kW against 143 kW).

The Cat 950 is ahead on: more power, more hydraulic flow, faster. The Komatsu WA380-8 is ahead on: dumps higher, reaches higher, bigger bucket or body, lifts or carries more, more digging or pushing force, bigger fuel tank, narrower to transport, lower to transport.

Below, every figure both makers publish sits side by side, with the Cat 950 and the Komatsu WA380-8 drawn to the same scale from their dimension drawings.

  1. Cat 950, side view

    Cat · wheel loader

    Cat 950

    Full specsPDF

  2. Komatsu WA380-8, side view

    Komatsu · wheel loader

    Komatsu WA380-8

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 950Komatsu WA380-8
Operating weight18,076 kg18,455 kg
Gross powerHigher is better186 kW+30%143 kW
Dump clearance at max liftHigher is better2.844 m2.95 m+4%
Hinge pin height (max lift)Higher is better3.981 m4.095 m+3%
Bucket capacityHigher is better3.1 m³3.3 m³+6%
Static tipping load (full turn)Higher is better10,936 kg13,440 kg+23%
Breakout forceHigher is better152 kN158 kN+4%
Pump flowHigher is better322 L/min+57%205 L/min
Fuel tankHigher is better259.5 L300 L+16%
Top speedHigher is better39.5 km/h+9%36.1 km/h
Width over tyresLower is better2.8 m2.78 m+1%
Overall height (to top of cab)Lower is better3.456 m3.39 m+2%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (bucket on ground)8.238 m8.31 m3.3 m³ general-purpose bucket
Wheelbase3.35 m3.3 m
Overall height (to top of cab)3.456 mHeight to top of ROPS3.39 mOverall height, ROPS cab
Height to top of exhaust3.408 m3.1 mOverall height, top of the stack
Ground clearance0.354 m0.455 m
Tread width2.14 m2.16 mCentre of tread to centre of tread
Width over tyres2.8 mUnloaded, over tyre bulge2.78 m
Bucket width2.927 m2.905 m
Hinge pin height (max lift)3.981 mStandard lift4.095 mStandard boom (high-lift boom 4625 mm)
Dump clearance at max lift2.844 m2.95 mAt bucket edge, 45 deg dump angle
Reach at max lift1.325 m1.15 mAt max height and 45 deg dump angle
Overall height, bucket at max lift5.313 m5.6 m
Articulation angle40°est.Estimate: Cat rates the full-turn tipping load at a full 40 degree turn35°Steering angle 35 degrees each direction (40 degrees to max end stop); from SMS Equipment (Komatsu dealer) copy of the Komatsu brochure

Weight

Operating weight18,076 kg18,455 kgIncludes lubricants, coolant, full fuel tank, ROPS cab and operator

Engine

Engine modelCat C7.1Komatsu SAA6D107E-3
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)EPA Tier 4 Final
Displacement7 L6.7 L
Gross power186 kW (249 hp)ISO 14396:2002 @ 2,100 rpm143 kW (192 HP)SAE J1995 @ 2,100 rpm
Net power172 kW (231 hp)ISO 9249:2007 / SAE J1349:2011 @ 2,100 rpm143 kW (191 HP)ISO 9249 / SAE J1349 @ 2,100 rpm
Cylinders6est.Estimate: same Cat C7.1 engine, listed as 6 cylinders on Cat's 120 motor grader sheet6

Performance

Bucket capacity3.1 m³3.3 m³Heaped, general-purpose bucket with bolt-on cutting edge (struck 2.9 m³)
Bucket capacity range2.5–9.9 m³ (3.3–13.0 yd³)2.7 – 3.3 m³
Static tipping load (full turn)10,936 kg13,440 kg40 deg articulation
Breakout force152 kNMachine configuration defined under "Weight"158 kN
Top speed39.5 km/hForward 5, empty bucket, standard L3 tyres36.1 km/hForward 4th gear, P-mode, 23.5-25 tyres; 37.5 km/h with lock-up clutch on
Static tipping load (straight)12,639 kg3.1 m3 GP pin-on bucket with bolt-on cutting edges, with tyre deflection (ISO 14397-1)15,440 kg

Hydraulics

Pump flow322 L/minImplement pump, maximum output at 2,340 rpm205 L/minLoader control piston pump at rated rpm
Max pressure279 bar314 barLoader relief setting 31.4 MPa

Transmission

Forward gear 16.9 km/h6.6 km/hP-mode, 23.5-25 tyres, lock-up off
Forward gear 212 km/h11.7 km/hP-mode, 23.5-25 tyres, lock-up off
Forward gear 319.3 km/h20.9 km/hP-mode, 23.5-25 tyres, lock-up off
Forward gear 425.7 km/h36.1 km/hP-mode, 23.5-25 tyres, lock-up off
Reverse gear 16.9 km/h7.1 km/hP-mode, 23.5-25 tyres, lock-up off
Reverse gear 212 km/h12.4 km/hP-mode, 23.5-25 tyres, lock-up off
Reverse gear 325.7 km/h22.3 km/hP-mode, 23.5-25 tyres, lock-up off

Tyres

TyresBridgestone 23.5R25 VJT L3 radial23.5R25 (L3)Tyres the dimension table is based on

Service capacities

Fuel tank259.5 L300 L
Cooling system54 LTier 3 engine60.6 L
Engine oil, with filter21 L23 L
Transmission43 LAutomatic full-powershift, countershaft type; 3-element, 1-stage, 2-phase torque converter; 4F/4R
Differentials and final drives, front43 L40 L
Differentials and final drives, rear43 L40 L

Sources: Cat 950 Wheel Loader Technical Specifications AEXQ3868-00 (7-2024) · Komatsu WA380-8 brochure AESS882-04 (Komatsu America, hosted by SMS Equipment)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m
Cat 950Komatsu WA380-8Same scale, front edges and ground lined up.

Cat 950 vs Komatsu WA380-8: questions

Which is bigger, the Cat 950 or Komatsu WA380-8?

By operating weight the Komatsu WA380-8 is the biggest at 18.5 t, then the Cat 950 at 18.1 t.

Which has more power, the Cat 950 or Komatsu WA380-8?

The Cat 950: Cat 950 186 kW (249 hp), Komatsu WA380-8 143 kW (192 HP) (gross power), a 30% difference.

Which has the bigger bucket, the Cat 950 or Komatsu WA380-8?

The Komatsu WA380-8: Cat 950 3.1 m³, Komatsu WA380-8 3.3 m³ (bucket capacity), a 6% difference.

Which lifts or carries more, the Cat 950 or Komatsu WA380-8?

The Komatsu WA380-8: Cat 950 10,936 kg, Komatsu WA380-8 13,440 kg (static tipping load (full turn)), a 23% difference.

Which has the bigger fuel tank, the Cat 950 or Komatsu WA380-8?

The Komatsu WA380-8: Cat 950 259.5 L, Komatsu WA380-8 300 L (fuel tank), a 16% difference.

Which is narrower to transport, the Cat 950 or Komatsu WA380-8?

The Komatsu WA380-8: Cat 950 2.8 m, Komatsu WA380-8 2.78 m (width over tyres), a 1% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.