EF Logo

wheel loadermade by KomatsuUAE, USA, Global

Komatsu WA500-8Specs, weight and dimensions

Bucket
5.8 m³
7.6 yd3
Weight
35.7 t
35,661 kg
Est. new price
~$550k

Quick answer

The Komatsu WA500-8 is a 35.7-tonne wheel loader with a Komatsu SAA6D140E-7 engine rated at 263 kW (353 HP). It carries a 5.8 m³ bucket, has a full-turn tipping load of 23,272 kg and dumps with 3.275 m clearance. It suits loading trucks from stockpiles and moving sand, aggregate and soil around site. Its rivals include the Cat 980 (30.3 t) and the Volvo L220H (31.3 t).

Komatsu WA500-8 (illustration)

How much does a Komatsu WA500-8 weigh?

The Komatsu WA500-8 weighs 35.7 tonnes (35,661 kg, 78,619 lb) in working order, with fuel, operator and standard attachment. That is 18% heavier than the Cat 980 (30.3 t) and 14% heavier than the Volvo L220H (31.3 t). The figures are from Komatsu WA500-8 brochure AESS891 (Komatsu America). Options and attachments change the figure, so check the plate of the machine in front of you.

What engine is in the Komatsu WA500-8?

The Komatsu WA500-8 has a Komatsu SAA6D140E-7 engine rated at 263 kW (353 HP) net, ISO 9249 / SAE J1349 @ 1,900 rpm. It displaces 15.2 L (930 in3). Emissions: EPA Tier 4 Final. The fuel tank holds 473 L (125.0 US gal) and the engine takes 37 L (9.8 US gal) of oil.

What bucket size does the Komatsu WA500-8 have?

The Komatsu WA500-8 carries a 5.8 m³ bucket, has a full-turn tipping load of 23,272 kg and dumps with 3.275 m clearance. In imperial units the bucket capacity is 7.6 yd3. The sheet notes: heaped, general-purpose bucket with bolt-on cutting edge (struck 4.9 m³). On the same row of their sheets, the Cat 980 shows 5.4 m³ and the Volvo L220H shows 5.2 m³.

What are the Komatsu WA500-8 dimensions?

The Komatsu WA500-8 is 9.95 m (32 ft 8 in) long, 3.19 m (10 ft 6 in) wide and 3.79 m (12 ft 5 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 980 is 9.67 m long, 3.24 m wide and 3.83 m high.

Komatsu WA500-8 vs Cat 980: what is the difference?

The Komatsu WA500-8 is 18% heavier than the Cat 980: 35.7 t against 30.3 t. The Komatsu WA500-8 lifts its hinge pin higher (4.755 m against 4.554 m), takes a bigger bucket (5.8 m³ against 5.4 m³) and has a higher tipping load (27,179 kg against 22,809 kg). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the WA500-8. The WA500-6 is not covered here and has figures of its own, so check the serial plate before using these for one.

Komatsu WA500-8 dimensions

Komatsu WA500-8, side view with dimensions (illustration)3.79 m3.78 m9.95 m
Side view
Komatsu WA500-8, front view (illustration)3.19 m
Front view
Overall height
3.79 m
Wheelbase
3.78 m
Overall length
9.95 m
Overall width
3.19 m

Illustration; figures from the maker's sheet.

How big is the Komatsu WA500-8?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu WA500-8 drawn to scale beside a person and a pickup truck. The Komatsu WA500-8 is 9.95 m long - about 1.9 pickup trucks - and 3.79 m tall, 2.2 times a person's height.Komatsu WA500-89.95 × 3.79 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Komatsu WA500-8 is 9.95 m long - about 1.9 pickup trucks - and 3.79 m tall, 2.2 times a person's height.

Komatsu WA500-8 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

60 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length (bucket on ground)9.945 m5.8 m³ general-purpose bucket[1] p.15
Wheelbase3.78 m[1] p.15
Height to top of cab3.785 mOverall height, ROPS cab[1] p.15
Height to top of exhaust3.665 mOverall height, top of the stack[1] p.15
Ground clearance0.45 m[1] p.15
Hitch height1.115 m[1] p.15
Tread width2.4 mCentre of tread to centre of tread[1] p.15
Width over tyres3.19 m[1] p.15
Bucket width3.4 m[1] p.15
Hinge pin height (max lift)4.755 mStandard boom (high-lift boom 5165 mm)[1] p.15
Dimensions, part 2 of 2
FigureValue (metric)Source
Hinge pin height (carry)0.575 mStandard boom (high-lift boom 700 mm)[1] p.15
Dump clearance at max lift3.275 mAt bucket edge, 45 deg dump angle[1] p.15
Reach at max lift1.525 mAt max height and 45 deg dump angle[1] p.15
Reach at 2130 mm clearance2.315 m7 ft clearance, 45 deg dump angle[1] p.15
Reach with arm horizontal3.295 mBucket level[1] p.15
Operating height (fully raised)6.47 m[1] p.15
Loader clearance circle diameter16.45 mBucket at carry, outside corner of bucket[1] p.15
Turning radius (centre of outside tyre)7.05 m[1] p.14
Digging depth (0 deg)0.135 m[1] p.15
Digging depth (10 deg)0.44 m[1] p.15

Weight

Weight
FigureValue (metric)Source
Operating weight35,661 kgIncludes lubricants, coolant, full fuel tank, ROPS cab and operator[1] p.15
Operating weight range35 504 – 35 935 kg[1] p.15
Bucket weight3,210 kg[1] p.15

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu SAA6D140E-7[1] p.14
EmissionsEPA Tier 4 Final[1] p.14
TypeWater-cooled, 4-cycle, variable-geometry turbocharged, after-cooled, cooled EGR diesel[1] p.14
Cylinders6[1] p.14
Bore140 mm[1] p.14
Engine, part 2 of 2
FigureValue (metric)Source
Stroke165 mm[1] p.14
Displacement15.2 L[1] p.14
Gross power266 kW (357 HP)SAE J1995 @ 1,900 rpm[1] p.14
Net power263 kW (353 HP)ISO 9249 / SAE J1349 @ 1,900 rpm[1] p.14
Fan driveHydraulic[1] p.14

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity5.8 m³Heaped, general-purpose bucket with bolt-on cutting edge (struck 4.9 m³)[1] p.15
Bucket capacity range4.5 – 6.3 m³Excavating bucket on the high-lift boom to loose-material bucket[1] p.15
Static tipping load (straight)27,179 kg[1] p.15
Static tipping load (full turn)23,272 kg40 deg articulation[1] p.15
Performance, part 2 of 2
FigureValue (metric)Source
Breakout force240 kN[1] p.15
Top speed35.5 km/hForward 4th gear, P-mode, 29.5-25 tyres; 37.3 km/h with lock-up clutch on[1] p.14
Hydraulic cycle time7.2 s raise / 1.7 s dump / 4.2 s lower (rated load in bucket)[1] p.14

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow320 L/minLoader control piston pump at rated rpm[1] p.14
Max pressure343 barLoader relief setting 34.3 MPa[1] p.14
Steering pump flow120 L/minAt rated rpm; relief 24.5 MPa[1] p.14
Boom cylinders2 × 160 mm bore × 898 mm stroke[1] p.14
Hydraulics, part 2 of 2
FigureValue (metric)Source
Bucket cylinder1 × 185 mm bore × 675 mm stroke[1] p.14
Steering cylinders2 × 100 mm bore × 486 mm stroke[1] p.14
Control valve2-spool; boom raise/hold/lower/float, bucket tilt-back/hold/dump[1] p.14

Transmission

Transmission, part 1 of 2
FigureValue (metric)Source
TransmissionFull-powershift, planetary type; 3-element, 1-stage, 2-phase torque converter; 4F/4R[1] p.14
Forward 17.5 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Forward 212.9 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Forward 322.2 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Forward 435.5 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Reverse 18.5 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Transmission, part 2 of 2
FigureValue (metric)Source
Reverse 212.9 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Reverse 324.7 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Reverse 438 km/hP-mode, 29.5-25 tyres, lock-up off[1] p.14
Axles and final driveFour-wheel drive; front fixed, rear centre-pin oscillating (20 deg total); full-floating axles, planetary final drive[1] p.14
BrakesHydraulically actuated wet disc brakes on four wheels; wet disc parking brake[1] p.14
Steering angle36°Each side; 40 deg to max end stop[1] p.14

Tyres

Tyres
FigureValue (metric)Source
Tyres29.5-25-22PR (L3)Tyres the dimension table is based on; 875/65-R29 on the yard-loader version[1] p.15

Build: Komatsu WA500-8 (EPA Tier 4 Final, SAA6D140E-7) per the Komatsu America brochure AESS891, standard boom, 29.5-25-22PR (L3) tyres, 5.8 m³ heaped general-purpose bucket with bolt-on cutting edge. Komatsu Middle East lists the earlier WA500-6; its figures are not covered.

  1. [1]Komatsu WA500-8 brochure AESS891 (Komatsu America)
  2. [2]Komatsu WA500-8 product page (Komatsu America)

Komatsu WA500 generations

The years each was built and what changed, each fact with the page it was read from.

  1. -

    WA500-7

    Dash 7 model with a Tier 4 Interim engine, the predecessor of the WA500-8. Komatsu released it with higher performance and lower running costs than the model before it. komatsu.com

  2. 2016

    WA500-8from 2016Current

    Introduced in North America in May 2016 with an EPA Tier 4 Final engine, 353 hp net, SmartLoader Logic and an enhanced lock-up torque converter. Komatsu claims up to 5% less fuel than the Tier 4 Interim model; auto-dig and an integrated load meter were added. constructionequipmentguide.com

The specs on this page are for the WA500-8 (EPA Tier 4 Final, SAA6D140E-7). Other generations differ in engine, weight and size.

Komatsu WA500-8 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
473 L125.0 US gal
DEF tank
36 L9.5 US gal
Cooling system
110 L29.1 US gal
Engine oil
37 L9.8 US gal
Hydraulic system
337 L89.0 US gal
Torque converter and transmission
71 L18.8 US gal
Axle, front
95 L25.1 US gal
Axle, rear
95 L25.1 US gal

Komatsu WA500-8 against its rivals

The wheel loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu WA500-8, Cat 980, Volvo L220H, SANY SW978K1: specifications side by side
FigureKomatsu WA500-8this pageCat 980 specsVolvo L220H specsSANY SW978K1 specs
Operating weight35,661 kg30,344 kg31,260 kg25,500 kg
Gross power266 kW (357 HP)303 kW (406 hp)not on its sheetnot on its sheet
Max torquenot on its sheet2,172 Nm2,265 Nm1,185 Nm
Digging depth0.135 mnot on its sheetnot on its sheet0.075 m
Dump clearance at max lift3.275 m3.287 m3.07 m3.4 m
Hinge pin height (max lift)4.755 m4.554 m4.65 m4.84 m
Bucket capacity5.8 m³5.4 m³5.2 m³7 m³
Static tipping load (straight)27,179 kg22,809 kg23,680 kgnot on its sheet
Breakout force240 kN227 kN241 kN200 kN
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Komatsu WA500-8 if you need a deeper dig (0.135 m) and a higher tipping load (27,179 kg).
  • Pick the Cat 980 if you need more gross power (303 kW).
  • Pick the Volvo L220H if you need more torque (2,265 Nm) and more digging force (241 kN).
  • Pick the SANY SW978K1 if you need a higher dump (3.4 m), a higher hinge pin (4.84 m) and a bigger bucket (7 m³).

Komatsu WA500-8 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Komatsu WA500-8 costs about $550,000 (USD), base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

Komatsu WA500-8 on EquipmentsFinder in the UAE now: none for rent, 3 listed for sale. Too few carry a price to give a Komatsu WA500-8 range, so the figure below is for all wheel loaders.

See all 3

Typical asking price, usedmedian of 18

AED 257,500

No priced Komatsu WA500-8 for sale yet: this is all wheel loaders

Low AED 97,000High AED 540,000

Who is asking for wheel loaders in the UAE

Contractors posted 19 requests for wheel loaders on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (10), Abu Dhabi (5) and Sharjah (2). Requests name a kind of machine, not a model, so this counts every wheel loader, the Komatsu WA500-8 among them.

Requests, last 12 months
19
For Dubai
10
For Abu Dhabi
5
  • 5 Ton Wheel Loader Required For RentAbu Dhabi / 14 November 2026
  • 5 ton Wheel loader Required For RentAbu Dhabi / 14 November 2026
  • Wheel Loader/Shovel Required For Purchase13 November 2026

Open wheel loader requests on the Inquiry BoardPost a request for a Komatsu WA500-8

Does a Komatsu WA500-8 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu WA500-8 is 3.19 m wide against a 2.34 m door opening and 3.79 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
9.95 m
Width
3.19 m
Height
3.79 m
Weight
35.7 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu WA500-8

For the people who run one: codes, charts and calculators that fit a wheel loader.

Same class: 30 ton wheel loaders

30 ton wheel loaders with an operating weight of 22 to 40 t, lightest first. The Komatsu WA500-8 is 7 of 7; every figure is the maker's.

  1. 1Cat 96623.2 t
  2. 2Komatsu WA47023.3 t
  3. 3Volvo L150H24 t
  4. 4SANY SW978K125.5 t
  5. 5Cat 98030.3 t
  6. 6Volvo L220H31.3 t
  7. 7Komatsu WA500-8This page35.7 t

Popular Komatsu wheel loader models

Komatsu WA500-8 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu WA500-8 questions

What is the tipping load of a Komatsu WA500-8?

23,272 kg (51,306 lb), 40 deg articulation: the safe working load is about half of it.

What is the Komatsu WA500-8 lift height?

4.755 m (15' 7") to the bucket hinge pin at full lift.

How much horsepower does the Komatsu WA500-8 have?

353 hp (263 kW) net, ISO 9249 / SAE J1349 @ 1,900 rpm.

What is the dump height of a Komatsu WA500-8?

3.275 m (10' 9") of clearance at maximum lift, at bucket edge, 45 deg dump angle.

How tall is a Komatsu WA500-8?

3.79 m (12 ft 5 in) overall.

What is the breakout force of a Komatsu WA500-8?

240 kN (53,947 lbf) at the bucket edge.

How wide is a Komatsu WA500-8?

3.19 m (10 ft 6 in) overall.

What is the dump reach of a Komatsu WA500-8?

1.525 m (5' 0") at maximum lift, at max height and 45 deg dump angle.

What are the Komatsu WA500-8's main competitors?

The machines nearest it in size are the Volvo L220H, the Cat 980 and the SANY SW978K1. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu WA500-8 sold in the UAE?

Yes. The Komatsu WA500-8 is sold in the UAE, the USA and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Komatsu WA500-8 used for?

A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material. Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.

Embed this spec card

The Komatsu WA500-8's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-wa500" title="Komatsu WA500-8 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-wa500">Komatsu WA500-8 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu WA500-8 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.