Komatsu WA500-8
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · wheel loader

Komatsu WA500-8

Komatsu WA500-8 (EPA Tier 4 Final, SAA6D140E-7) per the Komatsu America brochure AESS891, standard boom, 29.5-25-22PR (L3) tyres, 5.8 m³ heaped general-purpose bucket with bolt-on cutting edge. Komatsu Middle East lists the earlier WA500-6; its figures are not covered.

UAEUSAGlobal

Bucket capacity
5.8 m³
power
263 kW (353 HP)
Operating weight
35,661 kg
Static tipping load (full turn)
23,272 kg
Komatsu WA500-8, side view with dimensions (illustration)3.79 m3.78 m9.95 m
Komatsu WA500-8, front view (illustration)3.19 m

Dimensions

Overall length (bucket on ground) (5.8 m³ general-purpose bucket)
9.945 m
Tread width (Centre of tread to centre of tread)
2.4 m
Width over tyres
3.19 m
Bucket width
3.4 m
Reach at max lift (At max height and 45 deg dump angle)
1.525 m
Reach at 2130 mm clearance (7 ft clearance, 45 deg dump angle)
2.315 m
Reach with arm horizontal (Bucket level)
3.295 m
Operating height (fully raised)
6.47 m
Loader clearance circle diameter (Bucket at carry, outside corner of bucket)
16.45 m
Turning radius (centre of outside tyre)
7.05 m
Digging depth (0 deg)
0.135 m
Digging depth (10 deg)
0.44 m

Weight

Operating weight (Includes lubricants, coolant, full fuel tank, ROPS cab and operator)
35,661 kg
Operating weight range
35 504 – 35 935 kg
Bucket weight
3,210 kg

Engine

Engine model
Komatsu SAA6D140E-7
Emissions
EPA Tier 4 Final
Type
Water-cooled, 4-cycle, variable-geometry turbocharged, after-cooled, cooled EGR diesel
Cylinders
6
Bore
140 mm
Stroke
165 mm
Displacement
15.2 L
Gross power (SAE J1995 @ 1,900 rpm)
266 kW (357 HP)
Net power (ISO 9249 / SAE J1349 @ 1,900 rpm)
263 kW (353 HP)
Fan drive
Hydraulic

Performance

Bucket capacity (Heaped, general-purpose bucket with bolt-on cutting edge (struck 4.9 m³))
5.8 m³
Bucket capacity range (Excavating bucket on the high-lift boom to loose-material bucket)
4.5 – 6.3 m³
Static tipping load (straight)
27,179 kg
Static tipping load (full turn) (40 deg articulation)
23,272 kg
Breakout force
240 kN
Top speed (Forward 4th gear, P-mode, 29.5-25 tyres; 37.3 km/h with lock-up clutch on)
35.5 km/h
Hydraulic cycle time
7.2 s raise / 1.7 s dump / 4.2 s lower (rated load in bucket)

Hydraulics

Pump flow (Loader control piston pump at rated rpm)
320 L/min
Max pressure (Loader relief setting 34.3 MPa)
343 bar
Steering pump flow (At rated rpm; relief 24.5 MPa)
120 L/min
Boom cylinders
2 × 160 mm bore × 898 mm stroke
Bucket cylinder
1 × 185 mm bore × 675 mm stroke
Steering cylinders
2 × 100 mm bore × 486 mm stroke
Control valve
2-spool; boom raise/hold/lower/float, bucket tilt-back/hold/dump

Transmission

Transmission
Full-powershift, planetary type; 3-element, 1-stage, 2-phase torque converter; 4F/4R
Forward 1 (P-mode, 29.5-25 tyres, lock-up off)
7.5 km/h
Forward 2 (P-mode, 29.5-25 tyres, lock-up off)
12.9 km/h
Forward 3 (P-mode, 29.5-25 tyres, lock-up off)
22.2 km/h
Forward 4 (P-mode, 29.5-25 tyres, lock-up off)
35.5 km/h
Reverse 1 (P-mode, 29.5-25 tyres, lock-up off)
8.5 km/h
Reverse 2 (P-mode, 29.5-25 tyres, lock-up off)
12.9 km/h
Reverse 3 (P-mode, 29.5-25 tyres, lock-up off)
24.7 km/h
Reverse 4 (P-mode, 29.5-25 tyres, lock-up off)
38 km/h
Axles and final drive
Four-wheel drive; front fixed, rear centre-pin oscillating (20 deg total); full-floating axles, planetary final drive
Brakes
Hydraulically actuated wet disc brakes on four wheels; wet disc parking brake
Steering angle (Each side; 40 deg to max end stop)
36°

Tyres

Tyres (Tyres the dimension table is based on; 875/65-R29 on the yard-loader version)
29.5-25-22PR (L3)

Service capacities

Fuel tank
473 L
DEF tank
36 L
Cooling system
110 L
Engine oil
37 L
Hydraulic system
337 L
Torque converter and transmission
71 L
Axle, front
95 L
Axle, rear
95 L