Komatsu WA500-8
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · wheel loader

Komatsu WA500-8

Komatsu WA500-8 (EPA Tier 4 Final, SAA6D140E-7) per the Komatsu America brochure AESS891, standard boom, 29.5-25-22PR (L3) tyres, 5.8 m³ heaped general-purpose bucket with bolt-on cutting edge. Komatsu Middle East lists the earlier WA500-6; its figures are not covered.

UAEUSAGlobal

Bucket capacity
7.6 yd3
power
353 HP
Operating weight
78,619 lb
Static tipping load (full turn)
51,306 lb
Komatsu WA500-8, side view with dimensions (illustration)12.4 ft12.4 ft32.6 ft
Komatsu WA500-8, front view (illustration)10.5 ft

Dimensions

Overall length (bucket on ground) (5.8 m³ general-purpose bucket)
32' 8"
Tread width (Centre of tread to centre of tread)
7' 10"
Width over tyres
10' 6"
Bucket width
11' 2"
Reach at max lift (At max height and 45 deg dump angle)
5' 0"
Reach at 2130 mm clearance (7 ft clearance, 45 deg dump angle)
7' 7"
Reach with arm horizontal (Bucket level)
10' 10"
Operating height (fully raised)
21' 3"
Loader clearance circle diameter (Bucket at carry, outside corner of bucket)
54' 0"
Turning radius (centre of outside tyre)
23' 2"
Digging depth (0 deg)
0' 5"
Digging depth (10 deg)
1' 5"

Weight

Operating weight (Includes lubricants, coolant, full fuel tank, ROPS cab and operator)
78,619 lb
Operating weight range
35 504 – 35 935 kg
Bucket weight
7,077 lb

Engine

Engine model
Komatsu SAA6D140E-7
Emissions
EPA Tier 4 Final
Type
Water-cooled, 4-cycle, variable-geometry turbocharged, after-cooled, cooled EGR diesel
Cylinders
6
Bore
5.51"
Stroke
6.50"
Displacement
930 in3
Gross power (SAE J1995 @ 1,900 rpm)
357 HP
Net power (ISO 9249 / SAE J1349 @ 1,900 rpm)
353 HP
Fan drive
Hydraulic

Performance

Bucket capacity (Heaped, general-purpose bucket with bolt-on cutting edge (struck 4.9 m³))
7.6 yd3
Bucket capacity range (Excavating bucket on the high-lift boom to loose-material bucket)
4.5 – 6.3 m³
Static tipping load (straight)
59,919 lb
Static tipping load (full turn) (40 deg articulation)
51,306 lb
Breakout force
53,947 lbf
Top speed (Forward 4th gear, P-mode, 29.5-25 tyres; 37.3 km/h with lock-up clutch on)
22.1 mph
Hydraulic cycle time
7.2 s raise / 1.7 s dump / 4.2 s lower (rated load in bucket)

Hydraulics

Pump flow (Loader control piston pump at rated rpm)
84.5 US gal/min
Max pressure (Loader relief setting 34.3 MPa)
4,975 psi
Steering pump flow (At rated rpm; relief 24.5 MPa)
31.7 US gal/min
Boom cylinders
2 × 160 mm bore × 898 mm stroke
Bucket cylinder
1 × 185 mm bore × 675 mm stroke
Steering cylinders
2 × 100 mm bore × 486 mm stroke
Control valve
2-spool; boom raise/hold/lower/float, bucket tilt-back/hold/dump

Transmission

Transmission
Full-powershift, planetary type; 3-element, 1-stage, 2-phase torque converter; 4F/4R
Forward 1 (P-mode, 29.5-25 tyres, lock-up off)
4.7 mph
Forward 2 (P-mode, 29.5-25 tyres, lock-up off)
8.0 mph
Forward 3 (P-mode, 29.5-25 tyres, lock-up off)
13.8 mph
Forward 4 (P-mode, 29.5-25 tyres, lock-up off)
22.1 mph
Reverse 1 (P-mode, 29.5-25 tyres, lock-up off)
5.3 mph
Reverse 2 (P-mode, 29.5-25 tyres, lock-up off)
8.0 mph
Reverse 3 (P-mode, 29.5-25 tyres, lock-up off)
15.3 mph
Reverse 4 (P-mode, 29.5-25 tyres, lock-up off)
23.6 mph
Axles and final drive
Four-wheel drive; front fixed, rear centre-pin oscillating (20 deg total); full-floating axles, planetary final drive
Brakes
Hydraulically actuated wet disc brakes on four wheels; wet disc parking brake
Steering angle (Each side; 40 deg to max end stop)
36°

Tyres

Tyres (Tyres the dimension table is based on; 875/65-R29 on the yard-loader version)
29.5-25-22PR (L3)

Service capacities

Fuel tank
125.0 US gal
DEF tank
9.5 US gal
Cooling system
29.1 US gal
Engine oil
9.8 US gal
Hydraulic system
89.0 US gal
Torque converter and transmission
18.8 US gal
Axle, front
25.1 US gal
Axle, rear
25.1 US gal