EF Logo

compact track loadermade by CatUSA, Global

Cat 289D3Specs, weight and dimensions

Rated operating capacity
1,315 kg
2,890 lb
Weight
4.85 t
4,848 kg
Est. new price
~$98k

Quick answer

The Cat 289D3 is a 4.85-tonne compact track loader with a Cat C3.3B DIT (turbo) engine rated at 54.9 kW (73.7 hp). Its rated operating capacity is 1,315 kg. It suits grading and site preparation, moving material on soft ground and landscaping. People compare it with the Cat 299D3 (5.2 t) and the Cat 279D3 (4.58 t).

Cat 289D3 (illustration)

How much does a Cat 289D3 weigh?

The Cat 289D3 weighs 4.85 tonnes (4,848 kg, 10,688 lb) in working order, with fuel, operator and standard attachment. That is 7% lighter than the Cat 299D3 (5.2 t) and 6% heavier than the Cat 279D3 (4.58 t). It puts 32.2 kPa of pressure on the ground. Options and attachments change the figure, so check the plate of the machine in front of you.

What engine is in the Cat 289D3?

The Cat 289D3 has a Cat C3.3B DIT (turbo) engine rated at 54.9 kW (73.7 hp) net, ISO 9249; SAE J1349 54.4 kW (72.9 hp). It displaces 3.3 L (203 in3) and makes 265 Nm (195 lbf-ft) of torque. Emissions: U.S. EPA Tier 4 Final and EU Stage V. The fuel tank holds 105 L (27.7 gal) and the engine takes 11 L (3.0 gal) of oil.

Cat fault codes

How much can a Cat 289D3 lift?

The Cat 289D3's rated operating capacity is 1,315 kg. In imperial units the rated operating capacity is 2,890 lb. The sheet notes: 35% tipping load. On the same row of their sheets, the Cat 299D3 shows 1,580 kg and the Cat 279D3 shows 1,010 kg. Options change what a compact track loader does on the day, so treat the sheet as the standard build.

What are the Cat 289D3 dimensions?

The Cat 289D3 is 3.71 m (12 ft 2 in) long, 1.98 m (6 ft 6 in) wide and 2.11 m (6 ft 11 in) high. By size it passes the door of a standard 20 ft shipping container. The Cat 299D3 is 3.93 m long, 1.93 m wide and 2.13 m high.

Cat 289D3 vs Cat 299D3: what is the difference?

The Cat 289D3 is 7% lighter than the Cat 299D3: 4.85 t against 5.2 t. The Cat 289D3 has more digging or pushing force (3,307 kgf against 3,298 kgf), turns tighter (1.796 m against 1.881 m) and is lower to transport (2.113 m against 2.125 m). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the 289D3. The 289D is not covered here and has figures of its own, so check the serial plate before using these for one.

Cat 289D3 dimensions

Cat 289D3, side view with dimensions (illustration)2.11 m3.71 m
Side view
Cat 289D3, front view (illustration)1.98 m
Front view
Overall height
2.11 m
Overall length
3.71 m
Overall width
1.98 m

Illustration; figures from the maker's sheet.

How big is the Cat 289D3?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 289D3 drawn to scale beside a person and a pickup truck. The Cat 289D3 is 3.71 m long - 70% of a pickup truck's length - and 2.11 m tall, 1.2 times a person's height.Cat 289D33.71 × 2.11 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Cat 289D3 is 3.71 m long - 70% of a pickup truck's length - and 2.11 m tall, 1.2 times a person's height.

Cat 289D3 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 14 November 2026.

54 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length3.714 mLength with bucket on ground[1] p.16
Overall height2.113 mTop of cab[1] p.16
Width over tracks1.981 m450 mm tracks[1] p.16
Height to bucket hinge pin3.178 mBucket pin height at maximum lift[1] p.16
Dump height with standard bucket2.387 mClearance at maximum lift and dump[1] p.16
Reach at max lift and dump0.761 m[1] p.16
Maximum reach, arms parallel to ground1.27 m[1] p.16
Ground clearance (minimum)0.226 m[1] p.16
Length, track on ground1.63 m[1] p.16
Overall length, track2.129 m[1] p.16
Dimensions, part 2 of 2
FigureValue (metric)Source
Departure angle33°[1] p.16
Maximum dump angle51°[1] p.16
Length without attachment2.995 mLength without bucket[1] p.16
Maximum overall height4.051 mBucket raised[1] p.16
Bucket pin height at carry position0.19 m[1] p.16
Bucket pin reach at maximum lift0.369 m[1] p.16
Turning radius from centre, machine rear1.796 m[1] p.16
Turning radius from centre, coupler1.41 m[1] p.16
Turning radius from centre, bucket (racked)2.256 m[1] p.16
Rack back angle at maximum height84°[1] p.16

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Rated operating capacity1,315 kg35% tipping load[1] p.11
Rated operating capacity, 50% tipping load1,880 kg[1] p.11
Rated operating capacity with counterweight1,985 kgAt 50% tipping load, optional external counterweight[1] p.11
Tipping load3,750 kg[1] p.11
Performance, part 2 of 2
FigureValue (metric)Source
Breakout force, tilt cylinder3,307 kgf[1] p.11
Top speed13.3 km/hTwo-speed; 7.2 km/h (4.5 mph) one-speed[1] p.10
Lift typeVertical lift[1] p.6

Weight

Weight
FigureValue (metric)Source
Operating weight4,848 kgWith 2,036 mm low-profile bucket, 450 mm tracks, open ROPS, full fluids, 75 kg operator[1] p.10
Ground pressure32.2 kPa450 mm tracks[1] p.11

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C3.3B DIT (turbo)[1] p.10
EmissionsU.S. EPA Tier 4 Final and EU Stage V[1] p.13
Displacement3.3 L[1] p.10
Bore94 mm[1] p.10
Stroke120 mm[1] p.10
Engine, part 2 of 2
FigureValue (metric)Source
Gross power55.4 kW (74.3 hp)SAE J1995:2014[1] p.10
Net power54.9 kW (73.7 hp)ISO 9249; SAE J1349 54.4 kW (72.9 hp)[1] p.10
Max torque265 NmAt 1,500 rpm, SAE J1995[2] p.1
Cylinders4est.Estimate: the C3.3B engine's 94 x 120 mm bore x stroke and 3.3 L displacement give 4 cylinders[1]

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow86 L/minStandard flow, loader hydraulic flow[1] p.12
Pump flow (high flow XPS)121 L/minMaximum loader hydraulic flow[1] p.12
Max pressure230 barStandard flow; loader hydraulic pressure 23,000 kPa[1] p.12
Max pressure (high flow XPS)280 barMaximum loader hydraulic pressure 28,000 kPa[1] p.12
Hydraulics, part 2 of 2
FigureValue (metric)Source
Hydraulic power, standard flow33 kW (44 hp)Calculated[1] p.12
Hydraulic power, high flow XPS57 kW (76 hp)Calculated[1] p.12
Hydraulic tank39 L[1] p.10
Hydraulic system, with tank52 L[1] p.10

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Track width0.45 mSteel-embedded rubber track[2] p.3
SuspensionTorsion suspension, fully independent torsion axles[1] p.7
Undercarriage, part 2 of 2
FigureValue (metric)Source
Ground contact area1.47 m2450 mm tracks[1] p.11
IdlersDual-flange front / single-flange rear[2] p.1

Cab

Cab, part 1 of 2
FigureValue (metric)Source
ROPSISO 3471:2008[1] p.12
FOPSISO 3449:2005 Level I[1] p.12
Cab, part 2 of 2
FigureValue (metric)Source
Operator sound pressure level81 dB(A)ISO 6396:2008, cooling fan at 70% of maximum speed[1] p.13
Exterior sound power level103 dB(A)ISO 6395:2008[1] p.13

Build: Cat 289D3 compact track loader for North America and Europe (Cat C3.3B DIT turbo, 2,036 mm low-profile bucket, 450 mm tracks, OROPS, standard-flow hydraulics) per the D3-series specalog AEHQ8269-04 (08-2022); weight and torque cross-checked against the single-model sheet AEHQ8200-02 (09-2021). Dimension numbers are those on the numbered drawing on those sheets; overall length is the length with the bucket on the ground.

  1. [1]239D3 / 249D3 / 259D3 / 279D3 / 289D3 / 299D3 / 299D3 XE specalog AEHQ8269-04 (08-2022), Caterpillar PDF linked from Cat dealer pages
  2. [2]Cat 289D3 Compact Track Loader specalog AEHQ8200-02 (09-2021), Caterpillar PDF linked from Cat dealer pages
  3. [3]Cat 246D3 Skid Steer Loader spec sheet AEHQ8223 (08-2019) - same Cat C3.3B engine, basis for cylinder count

Cat 289D3 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
105 L27.7 gal
Cooling system
14 L3.7 gal
Engine oil
11 L3.0 gal

Cat 289D3 against its rivals

The compact track loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 289D3, Cat 299D3, Cat 279D3, Case TV450B: specifications side by side
FigureCat 289D3this pageCat 299D3 specsCat 279D3 specsCase TV450B specs
Operating weight4,848 kg5,200 kg4,579 kg4,823 kg
Gross power55.4 kW (74.3 hp)73 kW (98 hp)55.4 kW (74.3 hp)67 kW (90 hp)
Max torque265 Nm334 Nm265 Nmest.383 Nm
Maximum reach, arms parallel to ground1.27 m1.319 m1.373 mnot on its sheet
Dump height with standard bucket2.387 m2.399 m2.485 m2.65 m
Rated operating capacity1,315 kg1,580 kg1,010 kg1,432 kg
Tilt breakout force3,307 kgf3,298 kgf3,304 kgfnot on its sheet
Pump flow86 L/min86 L/min86 L/min92 L/min
Fuel tank105 L120 L105 L96.5 L
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 289D3 if you need more digging force (3,307 kgf).
  • Pick the Cat 299D3 if you need more gross power (73 kW), a higher rated capacity (1,580 kg) and a bigger fuel tank (120 L).
  • Pick the Cat 279D3 if you need longer reach (1.373 m).
  • Pick the Case TV450B if you need more torque (383 Nm), a higher dump (2.65 m) and more hydraulic flow (92 L/min).

Cat 289D3 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat 289D3 costs about $98,000 (USD), base machine before options, freight and tax - an estimate from dealer list prices, checked November 2026. Sources: westernstatescat.com.

Typical hire, per daymedian of 10

AED 450 /day

No priced Cat 289D3 for hire yet: this is all compact track loaders

Low AED 400High AED 650

No Cat 289D3 for rent listed right now.

Request a Cat 289D3

Does a Cat 289D3 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Yes, by size: at 3.71 m long, 1.98 m wide and 2.11 m high the Cat 289D3 passes the 2.34 m by 2.28 m door of a standard 20 ft container, which is 5.90 m long inside. Check its 4,848 kg against the payload on the container's plate.

Length
3.71 m
Width
1.98 m
Height
2.11 m
Weight
4.8 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 289D3

For the people who run one: codes, charts and calculators that fit a compact track loader.

Same class: Compact track loaders 2,500 to 3,000 lb

Compact track loaders 2,500 to 3,000 lb rated to lift 2,500 to 3,000 lb (1,134 to 1,361 kg), lowest-capacity first. The Cat 289D3 is 5 of 6; every figure is the maker's.

  1. 1Takeuchi TL10V21,145 kg
  2. 2John Deere 325G1,176 kg
  3. 3Bobcat T6501,242 kg
  4. 4Cat 2651,280 kg
  5. 5Cat 289D3This page1,315 kg
  6. 6Takeuchi TL12R21,349 kg

Popular Cat compact track loader models

Cat 289D3 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 289D3 questions

What is the tipping load of a Cat 289D3?

1,880 kg (4,130 lb): the safe working load is about half of it.

What is the Cat 289D3 lift height?

3.178 m (125.1 in) to the bucket hinge pin at full lift.

How much horsepower does the Cat 289D3 have?

73.7 hp (54.9 kW) net, ISO 9249; SAE J1349 54.4 kW (72.9 hp).

How high can a Cat 289D3 dump?

2.387 m (94.0 in), clearance at maximum lift and dump.

How tall is a Cat 289D3?

2.11 m (6 ft 11 in) overall.

How wide is a Cat 289D3?

1.98 m (6 ft 6 in) overall.

How much torque does a Cat 289D3 have?

265 Nm (195 lbf-ft).

What is the hydraulic flow of a Cat 289D3?

86 L/min (23 gal/min), standard flow, loader hydraulic flow standard flow.

What are the Cat 289D3's main competitors?

The machines nearest it in size are the Case TV450B, the Bobcat T76 and the Cat 265. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 289D3 sold in the UAE?

Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a Cat 289D3 used for?

A compact track loader: a skid steer on rubber tracks, with more grip and less ground pressure on sand, mud and finished surfaces. Typical jobs: grading and site preparation, moving material on soft ground, landscaping, running attachments: augers, mulchers, breakers.

Embed this spec card

The Cat 289D3's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-289d3" title="Cat 289D3 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-289d3">Cat 289D3 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 289D3 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.