EF Logo

compact track loadermade by CatUSA, Global

Cat 255Specs, weight and dimensions

Rated operating capacity
1,133 kg
2,499 lb
Weight
4.35 t
4,345 kg
Est. new price
~$93k

Quick answer

The Cat 255 is a 4.35-tonne compact track loader with a Cat C2.8T (turbo) engine rated at 54.4 kW (73 hp). Its rated operating capacity is 1,133 kg. It suits grading and site preparation, moving material on soft ground and landscaping. People compare it with the Cat 265 (4.76 t) and the John Deere 325G (4.31 t).

Cat 255 (illustration)

How much does a Cat 255 weigh?

The Cat 255 weighs 4.35 tonnes (4,345 kg, 9,578 lb) in working order, with fuel, operator and standard attachment. That is 9% lighter than the Cat 265 (4.76 t) and 1% heavier than the John Deere 325G (4.31 t). It puts 40.4 kPa of pressure on the ground. Options and attachments change the figure, so check the plate of the machine in front of you.

What engine is in the Cat 255?

The Cat 255 has a Cat C2.8T (turbo) engine rated at 54.4 kW (73 hp) net, ISO 9249; SAE J1349 54.8 kW (73.5 hp). It displaces 2.8 L (171 in3) and makes 300 Nm (221 lbf-ft) of torque. Emissions: U.S. EPA Tier 4 Final and EU Stage V. The fuel tank holds 93.9 L (24.8 gal) and the engine takes 8 L (2.1 gal) of oil.

Cat fault codes

How much can a Cat 255 lift?

The Cat 255's rated operating capacity is 1,133 kg. In imperial units the rated operating capacity is 2,499 lb. The sheet notes: 35% tipping load; +17 kg with enclosed cab. On the same row of their sheets, the Cat 265 shows 1,280 kg and the John Deere 325G shows 1,176 kg.

What are the Cat 255 dimensions?

The Cat 255 is 3.43 m (11 ft 3 in) long, 1.68 m (5 ft 6 in) wide and 2.12 m (6 ft 11 in) high. By size it passes the door of a standard 20 ft shipping container. The Cat 265 is 3.58 m long, 1.93 m wide and 2.12 m high.

Cat 255 vs Cat 265: what is the difference?

The Cat 255 is 9% lighter than the Cat 265: 4.35 t against 4.76 t. The Cat 255 has more gross power (55.4 kW against 55.2 kW), is faster (13.7 km/h against 13 km/h) and turns tighter (1.656 m against 1.741 m). The Cat 265 has more torque (380 Nm against 300 Nm), reaches further (1.187 m against 1.162 m) and dumps higher (2.655 m against 2.424 m).

Cat 255 dimensions

Cat 255, side view with dimensions (illustration)2.12 m3.43 m
Side view
Cat 255, front view (illustration)1.68 m
Front view
Overall height
2.12 m
Overall length
3.43 m
Overall width
1.68 m

Illustration; figures from the maker's sheet.

How big is the Cat 255?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 255 drawn to scale beside a person and a pickup truck. The Cat 255 is 3.43 m long - 65% of a pickup truck's length - and 2.12 m tall, 1.2 times a person's height.Cat 2553.43 × 2.12 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Cat 255 is 3.43 m long - 65% of a pickup truck's length - and 2.12 m tall, 1.2 times a person's height.

Cat 255 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 14 November 2026.

58 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length3.43 mLength with bucket on ground[1] p.2
Overall height2.115 mTop of cab[1] p.2
Width over tracks1.675 m320 mm tracks; 1.76 m (69.3 in) with 400 mm tracks[1] p.2
Height to bucket hinge pin3.15 mBucket pin height at maximum lift[1] p.2
Dump height with standard bucket2.424 mClearance at maximum lift and dump[1] p.2
Reach at max lift and dump0.54 m[1] p.2
Maximum reach, arms parallel to ground1.162 m[1] p.2
Ground clearance (minimum)0.212 m[1] p.2
Length, track on ground1.485 m[1] p.2
Overall length, track1.948 m[1] p.2
Departure angle31°[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Maximum dump angle46°[1] p.2
Length without attachment2.8 mLength without bucket[1] p.2
Maximum overall height3.941 mBucket raised[1] p.2
Bucket pin height at carry position0.195 m[1] p.2
Bucket pin reach at maximum lift0.151 m[1] p.2
Turning radius from centre, machine rear1.656 m[1] p.2
Turning radius from centre, coupler1.377 m[1] p.2
Turning radius from centre, bucket (racked)2.105 m[1] p.2
Rack back angle at maximum height85°[1] p.2
Roll back angle at ground level27°[1] p.2

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Rated operating capacity1,133 kg35% tipping load; +17 kg with enclosed cab[1] p.2
Rated operating capacity, 50% tipping load1,619 kg[1] p.2
Rated operating capacity with counterweight1,194 kgAt 35% tipping load, optional external counterweight[1] p.2
Tipping load3,238 kg+49 kg with enclosed cab, +172 kg with counterweight[1] p.2
Performance, part 2 of 2
FigureValue (metric)Source
Breakout force, lift cylinder2,674 kgf[1] p.2
Breakout force, tilt cylinder3,060 kgf[1] p.2
Top speed13.7 km/hTwo-speed; 14.7 km/h (9.1 mph) in overdrive, 9.2 km/h (5.7 mph) one-speed[1] p.1
Lift typeVertical lift[1] p.1

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight4,345 kgWith 1,730 mm low-profile bucket, 320 mm tracks, open canopy, full fluids, 75 kg operator[1] p.1
Operating weight change, enclosed cab82 kgAdded to operating weight[1] p.2
Operating weight change, counterweight125 kgAdded to operating weight[1] p.2
Weight, part 2 of 2
FigureValue (metric)Source
Operating weight change, 400 mm tracks54 kgAdded to operating weight[1] p.2
Ground pressure40.4 kPa320 mm tracks; 32.7 kPa (4.7 psi) with 400 mm tracks[1] p.2

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C2.8T (turbo)[1] p.1
EmissionsU.S. EPA Tier 4 Final and EU Stage V[1] p.1
Displacement2.8 L[1] p.1
Gross power55.4 kW (74 hp)SAE J1995[1] p.1
Engine, part 2 of 2
FigureValue (metric)Source
Net power54.4 kW (73 hp)ISO 9249; SAE J1349 54.8 kW (73.5 hp)[1] p.1
Max torque300 NmAt 1,600 rpm, SAE J1995[1] p.1
Alternator85 A[1] p.6
Cylinders4est.Estimate: Cat C2.8 (90 x 110 mm, 2.8 L per Cat's 906-908 brochure) is a 4-cylinder engine[3] p.12

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow76 L/minStandard flow, loader hydraulic flow[1] p.2
Pump flow (high flow)113 L/min[1] p.2
Pump flow (high flow XPS)113 L/minSame flow as High Flow, at higher pressure[1] p.2
Max pressure241 barStandard flow and High Flow; loader hydraulic pressure 24,130 kPa[1] p.2
Max pressure (high flow XPS)280 barLoader hydraulic pressure 28,000 kPa[1] p.2
Hydraulics, part 2 of 2
FigureValue (metric)Source
Hydraulic power, standard flow34.6 kW (46.4 hp)Calculated[1] p.2
Hydraulic power, high flow45.4 kW (60.9 hp)Calculated[1] p.2
Hydraulic power, high flow XPS52.7 kW (70.7 hp)Calculated[1] p.2
Hydraulic tank26 L[1] p.1
Hydraulic system, with tank36.8 L[1] p.1

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Track width0.32 mSteel-embedded rubber track; 320 mm bar tread as measured here, 400 mm block or bar tread optional[1] p.5
SuspensionTorsion suspension, 4 independent torsion axles[1] p.6
Undercarriage, part 2 of 2
FigureValue (metric)Source
Ground contact area1.05 m2320 mm tracks; 1.32 m2 (2,042 in2) with 400 mm tracks[1] p.2
IdlersDual-flange front / single-flange rear, or triple-flange front and rear[1] p.5

Cab

Cab
FigureValue (metric)Source
ROPSISO 3471:2008[1] p.1
FOPSISO 3449:2005 Level I; Level II optional[1] p.1

Build: Cat 255 compact track loader for North America and Europe (Cat C2.8T turbo, 1,730 mm low-profile bucket, 320 mm tracks, open canopy, standard-flow hydraulics) per Cat specalog AEHQ8449-06 (06-2026); it replaced the 259D3. Dimension numbers are those on the numbered drawing on that sheet; overall length is the length with the bucket on the ground.

  1. [1]Cat 255 Compact Track Loader specalog AEHQ8449-06 (06-2026), N Am / EU build, Caterpillar PDF linked from Cat dealer pages
  2. [2]Cat 255 specalog AEHQ8457-00 (11-2023), AME / S Am / ANZ / APD build, Mimico (Cat dealer) copy, used only to cross-check
  3. [3]Cat 906/907/908 Compact Wheel Loaders brochure AEHQ8443-00 (04-2024) - Cat C2.8 bore x stroke, basis for cylinder count

Cat 255 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
93.9 L24.8 gal
Cooling system
11.5 L3.0 gal
Engine oil
8 L2.1 gal

Cat 255 against its rivals

The compact track loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 255, Cat 265, John Deere 325G, Bobcat T66: specifications side by side
FigureCat 255this pageCat 265 specsJohn Deere 325G specsBobcat T66 specs
Operating weight4,345 kg4,759 kg4,313 kg4,296 kg
Gross power55.4 kW (74 hp)55.2 kW (74 hp)54.8 kW (74 hp)55.2 kW (74 hp)
Max torque300 Nm380 Nm280 Nm281 Nm
Maximum reach, arms parallel to ground1.162 m1.187 mnot on its sheetnot on its sheet
Dump height with standard bucket2.424 m2.655 m2.59 m2.396 m
Rated operating capacity1,133 kg1,280 kg1,176 kg1,115 kg
Lift breakout force2,674 kgf3,057 kgf2,384 kgf2,035 kgf
Pump flow76 L/min86 L/min78 L/min67 L/min
Fuel tank93.9 L120.7 L79 L107.1 L
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 255 if you need more gross power (55.4 kW).
  • Pick the Cat 265 if you need more torque (380 Nm), longer reach (1.187 m) and a higher dump (2.655 m).
  • Pick the Bobcat T66 if the lightest machine matters: at 4.3 t it weighs the least of the 4, and it leads no other figure here.

Cat 255 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat 255 costs about $90,000 to $95,000 (USD), base machine before options, freight and tax - an estimate from nearly new units for sale, checked November 2026. Sources: wheelercat.com.

Typical hire, per daymedian of 10

AED 450 /day

No priced Cat 255 for hire yet: this is all compact track loaders

Low AED 400High AED 650

No Cat 255 for rent listed right now.

Request a Cat 255

Does a Cat 255 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Yes, by size: at 3.43 m long, 1.68 m wide and 2.12 m high the Cat 255 passes the 2.34 m by 2.28 m door of a standard 20 ft container, which is 5.90 m long inside. Check its 4,345 kg against the payload on the container's plate.

Length
3.43 m
Width
1.68 m
Height
2.12 m
Weight
4.3 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 255

For the people who run one: codes, charts and calculators that fit a compact track loader.

Same class: Compact track loaders 2,000 to 2,500 lb

Compact track loaders 2,000 to 2,500 lb rated to lift 2,000 to 2,500 lb (907 to 1,134 kg), lowest-capacity first. The Cat 255 is 12 of 12; every figure is the maker's.

  1. 4Kubota SVL65-2953 kg
  2. 5Takeuchi TL8R2960 kg
  3. 6John Deere 317G965 kg
  4. 7Bobcat T590992 kg
  5. 8Cat 279D31,010 kg
  6. 9Bobcat T1901,088 kg
  7. 10Bobcat T661,115 kg
  8. 11Kubota SVL75-31,129 kg
  9. 12Cat 255This page1,133 kg

Showing 4 to 12 of 12, the machines nearest the Cat 255 by rated operating capacity.

Popular Cat compact track loader models

Cat 255 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 255 questions

What is the tipping load of a Cat 255?

1,619 kg (3,570 lb): the safe working load is about half of it.

What is the Cat 255 lift height?

3.15 m (124.0 in) to the bucket hinge pin at full lift.

How much horsepower does the Cat 255 have?

73 hp (54.4 kW) net, ISO 9249; SAE J1349 54.8 kW (73.5 hp).

How high can a Cat 255 dump?

2.424 m (95.4 in), clearance at maximum lift and dump.

How tall is a Cat 255?

2.12 m (6 ft 11 in) overall.

How wide is a Cat 255?

1.68 m (5 ft 6 in) overall.

How much torque does a Cat 255 have?

300 Nm (221 lbf-ft).

What is the hydraulic flow of a Cat 255?

76 L/min (20 gal/min), standard flow, loader hydraulic flow standard flow.

What are the Cat 255's main competitors?

The machines nearest it in size are the John Deere 325G, the Bobcat T66 and the Kubota SVL75-3. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 255 sold in the UAE?

Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a Cat 255 used for?

A compact track loader: a skid steer on rubber tracks, with more grip and less ground pressure on sand, mud and finished surfaces. Typical jobs: grading and site preparation, moving material on soft ground, landscaping, running attachments: augers, mulchers, breakers.

Embed this spec card

The Cat 255's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-255" title="Cat 255 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-255">Cat 255 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 255 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.