EF Logo

compact track loadermade by CatUSA, Global

Cat 279D3Specs, weight and dimensions

Rated operating capacity
1,010 kg
2,220 lb
Weight
4.58 t
4,579 kg
Horsepower
73.7 hp
54.9 kW

Quick answer

The Cat 279D3 is a 4.58-tonne compact track loader with a Cat C3.3B DIT (turbo) engine rated at 54.9 kW (73.7 hp). Its rated operating capacity is 1,010 kg. It suits grading and site preparation, moving material on soft ground and landscaping. Its rivals include the Cat 289D3 (4.85 t) and the Takeuchi TL10V2 (4.52 t).

Cat 279D3 (illustration)

How much does a Cat 279D3 weigh?

The Cat 279D3 weighs 4.58 tonnes (4,579 kg, 10,095 lb) in working order, with fuel, operator and standard attachment. That is 6% lighter than the Cat 289D3 (4.85 t) and 1% heavier than the Takeuchi TL10V2 (4.52 t). It puts 30.4 kPa of pressure on the ground. Options and attachments change the figure, so check the plate of the machine in front of you.

What engine is in the Cat 279D3?

The Cat 279D3 has a Cat C3.3B DIT (turbo) engine rated at 54.9 kW (73.7 hp) net, ISO 9249:2007; SAE J1349:2011 54.4 kW (72.9 hp). It displaces 3.3 L (203 in3) and makes 265 Nm (195 lbf-ft), estimated of torque. Emissions: U.S. EPA Tier 4 Final and EU Stage V.

Cat fault codes

How much can a Cat 279D3 lift?

The Cat 279D3's rated operating capacity is 1,010 kg. In imperial units the rated operating capacity is 2,220 lb. The sheet notes: 35% tipping load. On the same row of their sheets, the Cat 289D3 shows 1,315 kg and the Takeuchi TL10V2 shows 1,145 kg. Options change what a compact track loader does on the day, so treat the sheet as the standard build.

What are the Cat 279D3 dimensions?

The Cat 279D3 is 3.71 m (12 ft 2 in) long, 1.98 m (6 ft 6 in) wide and 2.11 m (6 ft 11 in) high. By size it passes the door of a standard 20 ft shipping container. The Cat 289D3 is 3.71 m long, 1.98 m wide and 2.11 m high.

Cat 279D3 vs Cat 289D3: what is the difference?

The Cat 279D3 is 6% lighter than the Cat 289D3: 4.58 t against 4.85 t. The Cat 279D3 reaches further (1.373 m against 1.27 m) and dumps higher (2.485 m against 2.387 m). The Cat 289D3 has a higher rated capacity (1,315 kg against 1,010 kg) and has more digging or pushing force (3,307 kgf against 3,304 kgf).

Cat 279D3 dimensions

Cat 279D3, side view with dimensions (illustration)2.11 m3.71 m
Side view
Cat 279D3, front view (illustration)1.98 m
Front view
Overall height
2.11 m
Overall length
3.71 m
Overall width
1.98 m

Illustration; figures from the maker's sheet.

How big is the Cat 279D3?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 279D3 drawn to scale beside a person and a pickup truck. The Cat 279D3 is 3.71 m long - 70% of a pickup truck's length - and 2.11 m tall, 1.2 times a person's height.Cat 279D33.71 × 2.11 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Cat 279D3 is 3.71 m long - 70% of a pickup truck's length - and 2.11 m tall, 1.2 times a person's height.

Cat 279D3 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 17 November 2026.

52 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length3.714 mLength with bucket on ground[1] p.17
Overall height2.113 mTop of cab[1] p.17
Width over tracks1.981 m450 mm tracks[1] p.17
Height to bucket hinge pin3.173 mBucket pin height at maximum lift[1] p.17
Dump height with standard bucket2.485 mClearance at maximum lift and dump[1] p.17
Reach at max lift and dump0.575 m[1] p.17
Maximum reach, arms parallel to ground1.373 m[1] p.17
Ground clearance (minimum)0.226 m[1] p.17
Length, track on ground1.63 m[1] p.17
Overall length, track2.129 m[1] p.17
Dimensions, part 2 of 2
FigureValue (metric)Source
Departure angle32°[1] p.17
Maximum dump angle39°[1] p.17
Length without attachment2.995 mLength without bucket[1] p.17
Maximum overall height4.051 mBucket raised[1] p.17
Bucket pin height at carry position0.198 m[1] p.17
Turning radius from centre, machine rear1.796 m[1] p.17
Turning radius from centre, coupler1.41 m[1] p.17
Turning radius from centre, bucket (racked)2.256 m[1] p.17
Rack back angle at maximum height84°[1] p.17

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Rated operating capacity1,010 kg35% tipping load[1] p.11
Rated operating capacity, 50% tipping load1,445 kg[1] p.11
Rated operating capacity with counterweight1,540 kgAt 50% tipping load, optional external counterweight[1] p.11
Tipping load2,885 kg[1] p.11
Performance, part 2 of 2
FigureValue (metric)Source
Breakout force, tilt cylinder3,304 kgf[1] p.11
Top speed13.3 km/hTwo-speed; 7.2 km/h (4.5 mph) one-speed[1] p.10
Lift typeRadial lift[1] p.6

Weight

Weight
FigureValue (metric)Source
Operating weight4,579 kgWith 2,036 mm low-profile bucket, 450 mm tracks, open ROPS, full fluids, 75 kg operator[1] p.10
Ground pressure30.4 kPa450 mm tracks[1] p.11

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C3.3B DIT (turbo)[1] p.10
EmissionsU.S. EPA Tier 4 Final and EU Stage V[1] p.13
Displacement3.3 L[1] p.10
Bore94 mm[1] p.10
Stroke120 mm[1] p.10
Engine, part 2 of 2
FigureValue (metric)Source
Gross power55.4 kW (74.3 hp)SAE J1995:2014[1] p.10
Net power54.9 kW (73.7 hp)ISO 9249:2007; SAE J1349:2011 54.4 kW (72.9 hp)[1] p.10
Cylinders4est.Estimate: same Cat C3.3B engine, listed as 4 cylinders on Cat's 246D3 sheet[2] p.1
Max torque265 Nmest.Estimate: same Cat C3.3B DIT engine and 55.4 kW gross rating as the 289D3, whose sheet gives 265 N·m peak at 1,500 rpm (SAE J1995)[3] p.1

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow86 L/minStandard flow, loader hydraulic flow[1] p.12
Pump flow (high flow XPS)121 L/minMaximum loader hydraulic flow[1] p.12
Max pressure230 barStandard flow; loader hydraulic pressure 23,000 kPa[1] p.12
Max pressure (high flow XPS)280 barMaximum loader hydraulic pressure 28,000 kPa[1] p.12
Hydraulics, part 2 of 2
FigureValue (metric)Source
Hydraulic power, standard flow33 kW (44 hp)Calculated[1] p.12
Hydraulic power, high flow XPS57 kW (76 hp)Calculated[1] p.12
Hydraulic tank39 L[1] p.10
Hydraulic system, with tank52 L[1] p.10

Undercarriage

Undercarriage
FigureValue (metric)Source
Track width0.45 mSteel-embedded rubber track[1] p.11
SuspensionTorsion suspension, independent torsion axles[1] p.7
Ground contact area1.47 m2450 mm tracks[1] p.11

Cab

Cab, part 1 of 2
FigureValue (metric)Source
ROPSISO 3471:2008[1] p.12
FOPSISO 3449:2005 Level I[1] p.12
Cab, part 2 of 2
FigureValue (metric)Source
Operator sound pressure level81 dB(A)ISO 6396:2008, cooling fan at 70% of maximum speed[1] p.13
Exterior sound power level103 dB(A)ISO 6395:2008[1] p.13

Build: Cat 279D3 compact track loader (radial lift, Cat C3.3B DIT turbo, 2,036 mm low-profile bucket, 450 mm tracks, open ROPS, standard-flow hydraulics) per the D3-series specalog AEHQ8269-04 (08-2022), a Caterpillar PDF linked from Cat dealer pages. Dimension numbers are those on the numbered drawing on that sheet; overall length is the length with the bucket on the ground.

  1. [1]239D3 / 249D3 / 259D3 / 279D3 / 289D3 / 299D3 / 299D3 XE specalog AEHQ8269-04 (08-2022), Caterpillar PDF linked from Cat dealer pages
  2. [2]Cat 246D3 Skid Steer Loader spec sheet AEHQ8223 (08-2019) - same Cat C3.3B engine, basis for cylinder count
  3. [3]Cat 289D3 Compact Track Loader spec sheet (CM20190506) - same Cat C3.3B DIT engine at 55.4 kW gross, basis for torque

Cat 279D3 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
105 L27.7 gal
Cooling system
14 L3.7 gal
Engine oil
11 L3.0 gal

Cat 279D3 against its rivals

The compact track loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 279D3, Cat 289D3, Takeuchi TL10V2, Bobcat T770: specifications side by side
FigureCat 279D3this pageCat 289D3 specsTakeuchi TL10V2 specsBobcat T770 specs
Operating weight4,579 kg4,848 kg4,515 kg4,686 kg
Gross power55.4 kW (74.3 hp)55.4 kW (74.3 hp)55.4 kW (74.3 hp)67.6 kW (91 hp)
Max torque265 Nmest.265 Nm261 Nmnot on its sheet
Maximum reach, arms parallel to ground1.373 m1.27 mnot on its sheetnot on its sheet
Dump height with standard bucket2.485 m2.387 m2.435 m2.675 m
Rated operating capacity1,010 kg1,315 kg1,145 kg1,618 kg
Tilt breakout force3,304 kgf3,307 kgfnot on its sheet2,878 kgf
Pump flow86 L/min86 L/min71 L/min87 L/min
Fuel tank105 L105 L81 L165.8 L
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 279D3 if you need longer reach (1.373 m).
  • Pick the Cat 289D3 if you need more digging force (3,307 kgf).
  • Pick the Takeuchi TL10V2 if the lightest machine matters: at 4.52 t it weighs the least of the 4, and it leads no other figure here.
  • Pick the Bobcat T770 if you need more gross power (67.6 kW), a higher dump (2.675 m) and a higher rated capacity (1,618 kg).

Cat 279D3 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Typical hire, per daymedian of 10

AED 450 /day

No priced Cat 279D3 for hire yet: this is all compact track loaders

Low AED 400High AED 650

No Cat 279D3 for rent listed right now.

Request a Cat 279D3

Does a Cat 279D3 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Yes, by size: at 3.71 m long, 1.98 m wide and 2.11 m high the Cat 279D3 passes the 2.34 m by 2.28 m door of a standard 20 ft container, which is 5.90 m long inside. Check its 4,579 kg against the payload on the container's plate.

Length
3.71 m
Width
1.98 m
Height
2.11 m
Weight
4.6 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 279D3

For the people who run one: codes, charts and calculators that fit a compact track loader.

Same class: Compact track loaders 2,000 to 2,500 lb

Compact track loaders 2,000 to 2,500 lb rated to lift 2,000 to 2,500 lb (907 to 1,134 kg), lowest-capacity first. The Cat 279D3 is 8 of 12; every figure is the maker's.

  1. 4Kubota SVL65-2953 kg
  2. 5Takeuchi TL8R2960 kg
  3. 6John Deere 317G965 kg
  4. 7Bobcat T590992 kg
  5. 8Cat 279D3This page1,010 kg
  6. 9Bobcat T1901,088 kg
  7. 10Bobcat T661,115 kg
  8. 11Kubota SVL75-31,129 kg
  9. 12Cat 2551,133 kg

Showing 4 to 12 of 12, the machines nearest the Cat 279D3 by rated operating capacity.

Popular Cat compact track loader models

Cat 279D3 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 279D3 questions

What is the tipping load of a Cat 279D3?

1,445 kg (3,170 lb): the safe working load is about half of it.

What is the Cat 279D3 lift height?

3.173 m (124.9 in) to the bucket hinge pin at full lift.

How much horsepower does the Cat 279D3 have?

73.7 hp (54.9 kW) net, ISO 9249:2007; SAE J1349:2011 54.4 kW (72.9 hp).

How high can a Cat 279D3 dump?

2.485 m (97.8 in), clearance at maximum lift and dump.

How tall is a Cat 279D3?

2.11 m (6 ft 11 in) overall.

How wide is a Cat 279D3?

1.98 m (6 ft 6 in) overall.

How much torque does a Cat 279D3 have?

265 Nm (195 lbf-ft, estimated).

What is the hydraulic flow of a Cat 279D3?

86 L/min (23 gal/min), standard flow, loader hydraulic flow standard flow.

What are the Cat 279D3's main competitors?

The machines nearest it in size are the Takeuchi TL10V2, the Bobcat T770 and the Bobcat T650. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 279D3 sold in the UAE?

Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a Cat 279D3 used for?

A compact track loader: a skid steer on rubber tracks, with more grip and less ground pressure on sand, mud and finished surfaces. Typical jobs: grading and site preparation, moving material on soft ground, landscaping, running attachments: augers, mulchers, breakers.

Embed this spec card

The Cat 279D3's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-279d3" title="Cat 279D3 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-279d3">Cat 279D3 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 279D3 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.