Specification sheetIssued 20 November 2026
Cat · compact track loader
Cat 255
Cat 255 compact track loader for North America and Europe (Cat C2.8T turbo, 1,730 mm low-profile bucket, 320 mm tracks, open canopy, standard-flow hydraulics) per Cat specalog AEHQ8449-06 (06-2026); it replaced the 259D3. Dimension numbers are those on the numbered drawing on that sheet; overall length is the length with the bucket on the ground.
USAGlobal
- Rated operating capacity
- 1,133 kg
- power
- 54.4 kW (73 hp)
- Operating weight
- 4,345 kg
2.12 m3.43 m
1.68 mPerformance
- Rated operating capacity (35% tipping load; +17 kg with enclosed cab)
- 1,133 kg
- Rated operating capacity, 50% tipping load
- 1,619 kg
- Rated operating capacity with counterweight (At 35% tipping load, optional external counterweight)
- 1,194 kg
- Tipping load (+49 kg with enclosed cab, +172 kg with counterweight)
- 3,238 kg
- Breakout force, lift cylinder
- 2,674 kgf
- Breakout force, tilt cylinder
- 3,060 kgf
- Top speed (Two-speed; 14.7 km/h (9.1 mph) in overdrive, 9.2 km/h (5.7 mph) one-speed)
- 13.7 km/h
- Lift type
- Vertical lift
Weight
- Operating weight (With 1,730 mm low-profile bucket, 320 mm tracks, open canopy, full fluids, 75 kg operator)
- 4,345 kg
- Operating weight change, enclosed cab (Added to operating weight)
- 82 kg
- Operating weight change, counterweight (Added to operating weight)
- 125 kg
- Operating weight change, 400 mm tracks (Added to operating weight)
- 54 kg
- Ground pressure (320 mm tracks; 32.7 kPa (4.7 psi) with 400 mm tracks)
- 40.4 kPa
Engine
- Engine model
- Cat C2.8T (turbo)
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
- Displacement
- 2.8 L
- Gross power (SAE J1995)
- 55.4 kW (74 hp)
- Net power (ISO 9249; SAE J1349 54.8 kW (73.5 hp))
- 54.4 kW (73 hp)
- Max torque (At 1,600 rpm, SAE J1995)
- 300 Nm
- Alternator
- 85 A
- Cylinders (Estimate: Cat C2.8 (90 x 110 mm, 2.8 L per Cat's 906-908 brochure) is a 4-cylinder engine)
- 4est.
Hydraulics
- Pump flow (Standard flow, loader hydraulic flow)
- 76 L/min
- Pump flow (high flow)
- 113 L/min
- Pump flow (high flow XPS) (Same flow as High Flow, at higher pressure)
- 113 L/min
- Max pressure (Standard flow and High Flow; loader hydraulic pressure 24,130 kPa)
- 241 bar
- Max pressure (high flow XPS) (Loader hydraulic pressure 28,000 kPa)
- 280 bar
- Hydraulic power, standard flow (Calculated)
- 34.6 kW (46.4 hp)
- Hydraulic power, high flow (Calculated)
- 45.4 kW (60.9 hp)
- Hydraulic power, high flow XPS (Calculated)
- 52.7 kW (70.7 hp)
- Hydraulic tank
- 26 L
- Hydraulic system, with tank
- 36.8 L
Undercarriage
- Track width (Steel-embedded rubber track; 320 mm bar tread as measured here, 400 mm block or bar tread optional)
- 0.32 m
- Suspension
- Torsion suspension, 4 independent torsion axles
- Ground contact area (320 mm tracks; 1.32 m2 (2,042 in2) with 400 mm tracks)
- 1.05 m2
- Idlers
- Dual-flange front / single-flange rear, or triple-flange front and rear
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I; Level II optional
Service capacities
- Fuel tank
- 93.9 L
- Cooling system
- 11.5 L
- Engine oil (Crankcase)
- 8 L