Specification sheetIssued 20 November 2026
Cat · compact track loader
Cat 255
Cat 255 compact track loader for North America and Europe (Cat C2.8T turbo, 1,730 mm low-profile bucket, 320 mm tracks, open canopy, standard-flow hydraulics) per Cat specalog AEHQ8449-06 (06-2026); it replaced the 259D3. Dimension numbers are those on the numbered drawing on that sheet; overall length is the length with the bucket on the ground.
USAGlobal
- Rated operating capacity
- 2,499 lb
- power
- 73 hp
- Operating weight
- 9,578 lb
6.9 ft11.3 ft
5.5 ftPerformance
- Rated operating capacity (35% tipping load; +17 kg with enclosed cab)
- 2,499 lb
- Rated operating capacity, 50% tipping load
- 3,570 lb
- Rated operating capacity with counterweight (At 35% tipping load, optional external counterweight)
- 2,632 lb
- Tipping load (+49 kg with enclosed cab, +172 kg with counterweight)
- 7,140 lb
- Breakout force, lift cylinder
- 5,895 lb
- Breakout force, tilt cylinder
- 6,746 lb
- Top speed (Two-speed; 14.7 km/h (9.1 mph) in overdrive, 9.2 km/h (5.7 mph) one-speed)
- 8.5 mph
- Lift type
- Vertical lift
Weight
- Operating weight (With 1,730 mm low-profile bucket, 320 mm tracks, open canopy, full fluids, 75 kg operator)
- 9,578 lb
- Operating weight change, enclosed cab (Added to operating weight)
- +180 lb
- Operating weight change, counterweight (Added to operating weight)
- +276 lb
- Operating weight change, 400 mm tracks (Added to operating weight)
- +119 lb
- Ground pressure (320 mm tracks; 32.7 kPa (4.7 psi) with 400 mm tracks)
- 40.4 kPa
Engine
- Engine model
- Cat C2.8T (turbo)
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
- Displacement
- 171 in3
- Gross power (SAE J1995)
- 74 hp
- Net power (ISO 9249; SAE J1349 54.8 kW (73.5 hp))
- 73 hp
- Max torque (At 1,600 rpm, SAE J1995)
- 221 lbf-ft
- Alternator
- 85 A
- Cylinders (Estimate: Cat C2.8 (90 x 110 mm, 2.8 L per Cat's 906-908 brochure) is a 4-cylinder engine)
- 4est.
Hydraulics
- Pump flow (Standard flow, loader hydraulic flow)
- 20 gal/min
- Pump flow (high flow)
- 30 gal/min
- Pump flow (high flow XPS) (Same flow as High Flow, at higher pressure)
- 30 gal/min
- Max pressure (Standard flow and High Flow; loader hydraulic pressure 24,130 kPa)
- 3,500 psi
- Max pressure (high flow XPS) (Loader hydraulic pressure 28,000 kPa)
- 4,061 psi
- Hydraulic power, standard flow (Calculated)
- 46.4 hp
- Hydraulic power, high flow (Calculated)
- 60.9 hp
- Hydraulic power, high flow XPS (Calculated)
- 70.7 hp
- Hydraulic tank
- 6.9 gal
- Hydraulic system, with tank
- 9.7 gal
Undercarriage
- Track width (Steel-embedded rubber track; 320 mm bar tread as measured here, 400 mm block or bar tread optional)
- 12.6 in
- Suspension
- Torsion suspension, 4 independent torsion axles
- Ground contact area (320 mm tracks; 1.32 m2 (2,042 in2) with 400 mm tracks)
- 1.05 m2
- Idlers
- Dual-flange front / single-flange rear, or triple-flange front and rear
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I; Level II optional
Service capacities
- Fuel tank
- 24.8 gal
- Cooling system
- 3.0 gal
- Engine oil (Crankcase)
- 2.1 gal