Cat 289D3
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Cat · compact track loader

Cat 289D3

Cat 289D3 compact track loader for North America and Europe (Cat C3.3B DIT turbo, 2,036 mm low-profile bucket, 450 mm tracks, OROPS, standard-flow hydraulics) per the D3-series specalog AEHQ8269-04 (08-2022); weight and torque cross-checked against the single-model sheet AEHQ8200-02 (09-2021). Dimension numbers are those on the numbered drawing on those sheets; overall length is the length with the bucket on the ground.

USAGlobal

Rated operating capacity
1,315 kg
power
54.9 kW (73.7 hp)
Operating weight
4,848 kg
Cat 289D3, side view with dimensions (illustration)2.11 m3.71 m
Cat 289D3, front view (illustration)1.98 m

Performance

Rated operating capacity (35% tipping load)
1,315 kg
Rated operating capacity, 50% tipping load
1,880 kg
Rated operating capacity with counterweight (At 50% tipping load, optional external counterweight)
1,985 kg
Tipping load
3,750 kg
Breakout force, tilt cylinder
3,307 kgf
Top speed (Two-speed; 7.2 km/h (4.5 mph) one-speed)
13.3 km/h
Lift type
Vertical lift

Weight

Operating weight (With 2,036 mm low-profile bucket, 450 mm tracks, open ROPS, full fluids, 75 kg operator)
4,848 kg
Ground pressure (450 mm tracks)
32.2 kPa

Engine

Engine model
Cat C3.3B DIT (turbo)
Emissions
U.S. EPA Tier 4 Final and EU Stage V
Displacement
3.3 L
Bore
94 mm
Stroke
120 mm
Gross power (SAE J1995:2014)
55.4 kW (74.3 hp)
Net power (ISO 9249; SAE J1349 54.4 kW (72.9 hp))
54.9 kW (73.7 hp)
Max torque (At 1,500 rpm, SAE J1995)
265 Nm
Cylinders (Estimate: the C3.3B engine's 94 x 120 mm bore x stroke and 3.3 L displacement give 4 cylinders)
4est.

Hydraulics

Pump flow (Standard flow, loader hydraulic flow)
86 L/min
Pump flow (high flow XPS) (Maximum loader hydraulic flow)
121 L/min
Max pressure (Standard flow; loader hydraulic pressure 23,000 kPa)
230 bar
Max pressure (high flow XPS) (Maximum loader hydraulic pressure 28,000 kPa)
280 bar
Hydraulic power, standard flow (Calculated)
33 kW (44 hp)
Hydraulic power, high flow XPS (Calculated)
57 kW (76 hp)
Hydraulic tank
39 L
Hydraulic system, with tank
52 L

Undercarriage

Track width (Steel-embedded rubber track)
0.45 m
Suspension
Torsion suspension, fully independent torsion axles
Ground contact area (450 mm tracks)
1.47 m2
Idlers
Dual-flange front / single-flange rear

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Operator sound pressure level (ISO 6396:2008, cooling fan at 70% of maximum speed)
81 dB(A)
Exterior sound power level (ISO 6395:2008)
103 dB(A)

Service capacities

Fuel tank
105 L
Cooling system
14 L
Engine oil (Crankcase)
11 L