Specification sheetIssued 20 November 2026
Cat · compact track loader
Cat 289D3
Cat 289D3 compact track loader for North America and Europe (Cat C3.3B DIT turbo, 2,036 mm low-profile bucket, 450 mm tracks, OROPS, standard-flow hydraulics) per the D3-series specalog AEHQ8269-04 (08-2022); weight and torque cross-checked against the single-model sheet AEHQ8200-02 (09-2021). Dimension numbers are those on the numbered drawing on those sheets; overall length is the length with the bucket on the ground.
USAGlobal
- Rated operating capacity
- 2,890 lb
- power
- 73.7 hp
- Operating weight
- 10,688 lb
6.9 ft12.2 ft
6.5 ftPerformance
- Rated operating capacity (35% tipping load)
- 2,890 lb
- Rated operating capacity, 50% tipping load
- 4,130 lb
- Rated operating capacity with counterweight (At 50% tipping load, optional external counterweight)
- 4,370 lb
- Tipping load
- 8,255 lb
- Breakout force, tilt cylinder
- 7,291 lb
- Top speed (Two-speed; 7.2 km/h (4.5 mph) one-speed)
- 8.3 mph
- Lift type
- Vertical lift
Weight
- Operating weight (With 2,036 mm low-profile bucket, 450 mm tracks, open ROPS, full fluids, 75 kg operator)
- 10,688 lb
- Ground pressure (450 mm tracks)
- 32.2 kPa
Engine
- Engine model
- Cat C3.3B DIT (turbo)
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
- Displacement
- 203 in3
- Bore
- 3.7 in
- Stroke
- 4.7 in
- Gross power (SAE J1995:2014)
- 74.3 hp
- Net power (ISO 9249; SAE J1349 54.4 kW (72.9 hp))
- 73.7 hp
- Max torque (At 1,500 rpm, SAE J1995)
- 195 lbf-ft
- Cylinders (Estimate: the C3.3B engine's 94 x 120 mm bore x stroke and 3.3 L displacement give 4 cylinders)
- 4est.
Hydraulics
- Pump flow (Standard flow, loader hydraulic flow)
- 23 gal/min
- Pump flow (high flow XPS) (Maximum loader hydraulic flow)
- 32 gal/min
- Max pressure (Standard flow; loader hydraulic pressure 23,000 kPa)
- 3,336 psi
- Max pressure (high flow XPS) (Maximum loader hydraulic pressure 28,000 kPa)
- 4,061 psi
- Hydraulic power, standard flow (Calculated)
- 44 hp
- Hydraulic power, high flow XPS (Calculated)
- 76 hp
- Hydraulic tank
- 10.3 gal
- Hydraulic system, with tank
- 13.7 gal
Undercarriage
- Track width (Steel-embedded rubber track)
- 17.7 in
- Suspension
- Torsion suspension, fully independent torsion axles
- Ground contact area (450 mm tracks)
- 1.47 m2
- Idlers
- Dual-flange front / single-flange rear
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- Operator sound pressure level (ISO 6396:2008, cooling fan at 70% of maximum speed)
- 81 dB(A)
- Exterior sound power level (ISO 6395:2008)
- 103 dB(A)
Service capacities
- Fuel tank
- 27.7 gal
- Cooling system
- 3.7 gal
- Engine oil (Crankcase)
- 3.0 gal