Volvo/Mack · MID 140 instrument cluster
Volvo/Mack Fault Code MID 140 PSID 239 FMI 12
Instrument cluster - Volvo Link hardware failure, use paper logs
What does Volvo/Mack code MID 140 PSID 239 FMI 12 mean?
Counts of this code and a driver display message, Volvo Link Hardware Failure Use Paper Logs, appear when the telematics gateway (MID 142) loses communication with the instrument cluster. Urgency: check soon - the machine may derate or limit a function. Check first: check the emissions level in the Product Details of the Premium Tech Tool before choosing the procedure.
- MID 140
- Which control unit reports it
- PSID 239
- Maker component at fault
- FMI 12
- Bad intelligent device or component
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check the emissions level in the Product Details of the Premium Tech Tool before choosing the procedure
Then 3 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 4 done
Causes
- Telematics gateway (TGW1) that stopped working after the 2G cellular networks shut down
- Telematics gateway not detected in the product information
- Low voltage during cranking or poor battery connections
How it failed
You'll notice: The driver display shows a message to use paper logs and the code counts up, sometimes after engine start.
Part or controllerRead from FMI 12: bad intelligent device or component
The controller reports a part, module or its software as faulty or not responding.
- Meter test
- Check power and ground at the module connector with the key on, then its fuses.
- Good result
- Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
When to stop
Make the machine safe before you start: on firm level ground, attachments down, key out.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other Volvo/Mack codes: MID 140 instrument cluster
Related on Equipments Finder
Source
This source lists MID 140 PSID 239 FMI 12 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Volvo VNX, VNL, VNM, VHD, VAH built from late 2013 through 2017 with TGW1 or TGW2 telematics.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
