Volvo/Mack · MID 140 instrument cluster
Volvo/Mack Fault Code MID 140 PSID 200 FMI 9
Instrument cluster - message missing after engine software update
What does Volvo/Mack code MID 140 PSID 200 FMI 9 mean?
On some Mack ISL-G models built between 2009 and January 2013, this code sets when the engine software is updated because a message is turned off in the new engine software. Urgency: check soon - the machine may derate or limit a function. Check first: connect the Premium Tech Tool and open parameter programming for the instrument cluster (MID 140).
- MID 140
- Which control unit reports it
- PSID 200
- Maker component at fault
- FMI 9
- Abnormal update rate
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Connect the Premium Tech Tool and open parameter programming for the instrument cluster (MID 140)
Then 3 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 4 done
Causes
- A message turned off in the new engine software
- Instrument cluster parameter setting out of date
- Engine software updated without matching cluster setting
How it failed
You'll notice: The cluster logs the fault after the engine software update.
Lost messageRead from FMI 9: abnormal update rate
A module stopped hearing another on the data link, or the data came late or garbled.
- Meter test
- Key off. Measure resistance between CAN high and CAN low at the diagnostic connector.
- Good result
- About 60 Ω on a two-terminator J1939 link. About 120 Ω means one terminator or one leg is open.
When to stop
Make the machine safe before you start: on firm level ground, attachments down, key out.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other Volvo/Mack codes: MID 140 instrument cluster
Related on Equipments Finder
Source
This source lists MID 140 PSID 200 FMI 9 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Mack LEU and MRU with ISL-G engines, model years 2007-2014.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
