EF Logo

Volvo/Mack · MID 130 transmission ECU

Volvo/Mack Fault Code MID 130 PSID 27 FMI 14

Clutch cannot disengage - engine shut down

What does Volvo/Mack code MID 130 PSID 27 FMI 14 mean?

The clutch system cannot disengage the clutch. The red stop lamp lights and the engine is shut down because gears cannot be selected. Urgency: stop now - shut down and fix before working on. Check first: do not keep driving; arrange a tow if needed before you replace any parts.

FaultStopMID 130PSID 27FMI 14Volvo/Mack · MID 130 transmission ECU
MID 130
Which control unit reports it
PSID 27
Maker component at fault
FMI 14
Special instructions

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Do not keep driving; arrange a tow if needed before you replace any parts

Then 3 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.

Checks

0 of 4 done

Causes

  • Clutch actuator or valve assembly failure
  • Mechanical clutch fault
  • Loss of air supply to the clutch cylinder

How it failed

You'll notice: Red stop lamp lit, the engine shuts down and you cannot shift gears or engage neutral.

OtherRead from FMI 14: special instructions

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Clutch operation

Source

Mack Service Bulletin 430 17 01, MID 130 Diagnostic Trouble Codes mDRIVE Transmission, PV776-89138344

This source lists MID 130 PSID 27 FMI 14 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Mack CHU, CXU, GU and TD trucks with the mDRIVE automated transmission (MID 130 transmission control unit).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.