EF Logo

Thermo King · Engine speed and starting (SR-2/SR-3/SR-4)

Thermo King Fault Code 17

Engine failed to crank

What does Thermo King code 17 mean?

The controller commanded the starter but the engine did not turn over. The starter, its relay or the battery supply are the usual suspects. Urgency: stop now - shut down and fix before working on. Check first: measure battery voltage at rest and while a start is attempted.

FaultStop17Thermo King · Engine speed and starting (SR-2/SR-3/SR-4)

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Measure battery voltage at rest and while a start is attempted

Then 4 more checks
Code shows hereFAULT17

Where this code shows

Press the alarm key or open the Alarms menu on the controller display to list active alarms.

Checks

0 of 5 done

Causes

  • Weak or discharged battery
  • Corroded battery terminals or ground strap
  • Starter solenoid or starter motor failed
  • Starter relay not receiving a start command

How it failed

You'll notice: Pressing start gives nothing, a click, or very slow turning, and alarm 17 appears after the attempt; the unit cannot run diesel.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine starting, glow plugs and engine speed

Source

Thermo King Alarm Codes - North America (thermoking.com alarm code list)

This source lists 17 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Thermo King SR-2, SR-3, SR-4 truck and trailer units and related Thermo King controllers (the families the source lists).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.